Heavy metal bioaccumulation and risk assessment for wild and farmed beluga sturgeon caviar

Because of over-exploitation of sturgeon for caviar production, they have been listed worldwide in annex II of the Convention on International Trade in Endangered Species regulations; so caviar production using aquaculture is increasingly seen as a feasible way to reduce overfishing. The accumulation of the nonessential metals As, Ba, Cd, Hg, Pb, and Sn was determined in the caviar of farmed and wild Beluga sturgeon (Huso huso). The levels of As in both and Cd in wild samples were less than 0.01 mg kg^?1 wet weight, and the comparison for all of the metals studied did not show large fluctuations in metal concentrations between farmed and wild caviar samples. The average for each toxic metal was below the permissible limits proposed by the UK’s Ministry of Agriculture, Fisheries and Foods (2000). The maximum allowable daily consumption rate of caviar was calculated; however, the health risks from caviar consumption are uncertain because the amount of caviar consumed by heavy users is not known.     

A heuristic approach to stochastic cutoff grade optimization for open pit mining complexes with multiple processing streams

Cutoff grade specifies the available supply of metallic ore from an open pit mine to the multiple processing streams of an open pit mining complex. An optimal cutoff grade strategy maximizes the net present value (NPV) of an open pit mining operation subject to the mining, processing, and marketing/refining capacity constraints. Even though, the quantities of material flowing from the mine to the market are influenced by the expected variation in the available metal content or inherent uncertainty in the supply of ore, the majority of cutoff grade optimization models not only disregard this aspect and may lead to unrealistic cash flows, but also they are limited in application to an open pit mining operation with single processing facility. The model proposed herein determines the optimal cutoff grade policy based on a stochastic framework that accounts for uncertainty in supply of ore to the multiple ore processing streams. An application on a large-scale open pit mining operation develops a unique cutoff grade policy along with a portfolio of mining, processing, and marketing/refining rates. Owing to the geological uncertainty, the approach addresses risk by showing a difference of 14% between the minimum and maximum production rates, cash flows and NPV.     

Groundwater-level trends and implications for sustainable water use in the Kabul Basin, Afghanistan

The Kabul Basin, which includes the city of Kabul, Afghanistan, with a population of approximately 4 million, has several Afghan, United States, and international military installations that depend on groundwater resources for a potable water supply. This study examined groundwater levels in the Kabul Basin from 2004 to 2012. Groundwater levels have increased slightly in rural areas of the Kabul Basin as a result of normal precipitation after the drought of the early 2000s. However, groundwater levels have decreased in the city of Kabul due to increasing water use in an area with limited recharge. The rate of groundwater-level decrease in the city is greater for the 2008–2012 period (1.5 meters per year (m/yr) on average) than for the 2004–2008 period (0–0.7 m/yr on average). The analysis, which is corroborated by groundwater-flow modeling and a non-governmental organization decision-support model, identified groundwater-level decreases and associated implications for groundwater sustainability in the city of Kabul. Military installations in the city of Kabul (the Central Kabul subbasin) are likely to face water management challenges resulting from long-term groundwater sustainability concerns, such as the potential drying of shallow water-supply wells. Installations in the northern part of the Kabul Basin may have fewer issues with long-term water sustainability. Groundwater-level monitoring and groundwater-flow simulation can be valuable tools for assessing groundwater management options to improve the sustainability of water resources in the Kabul Basin.     

Mission assurance policy and risk management in cybersecurity

Mission assurance policy and risk management are essential in enabling decision makers to ensure successful completion of missions by addressing the security status of cyber assets. This paper presents a novel mission assurance policy that adapts to the dynamic security status of all mission assets to quickly and automatically determine mission assurance level and to decide what changes are needed accordingly. The novelty of this mission assurance policy stems from using a time Petri net model for determining the security status of cyber assets, and then employing binary or multi-valued logic decision diagrams to assess the mission assurance level. The ability of a mission assurance policy to successfully complete its objectives depends mainly on whether a risk management scheme is provided to reduce risk to an acceptable level. To that end, this paper also describes a risk management scheme to systematically deal with the main factors of risk management such as the temporal interdependencies of cyber assets, impact of attacks, and risk mitigation. Given that the status of cyber assets changes due to the dynamic cybersecurity environment of asset vulnerabilities, threats, and recovery, the proposed mission assurance policy and risk management scheme enable decision makers to cope with the real-time assessment of mission assurance level.     

Polypropylene/poly (butylene terephthalate) melt spun alloy fibers dyeable with carrier-free exhaust dyeing as an environmentally friendlier process

Carrier agent as one of the synthetic persistent molecules present in textile effluents considered as one of the most highly toxic, carcinogenic and serious inhibitor of the microbial respirometric activity. This chemical is used as accelerants in the dyeing or printing the hydrophobic fibers by dispersed dyes. Hydrophobic polypropylene (PP) fibers cannot be dyed by conventional dyeing process due to the absence of dye sites in the molecular chain and their high crystallinity. This study presents a carrier-free exhaust dyeing as an environmentally friendlier and cleaner process. In order to produce dyeable PP fibers, the PP was blended and melt spun with poly(butylene terephthalate) (PBT) at various ratios. First PP and PBT granules at blend ratios of 5, 10, 20, 30, 40 percent of PBT dispersed phase were physically mixed then the melt spinning of blended samples was carried out by a Maddock mixing zone extruder. The results showed that suitable exhaust dyeing process without using any carrier agents was possible for all PP/PBT alloy fiber samples. The dye uptake of samples significantly increased by increasing the PBT dispersed phase content. By increasing the PBT dispersed phase content decrease in the crystallinity percent resulting in significant enhancement in dye uptake of the alloy fiber samples was observed. A degree of four polynomial equation for dye uptake against blend ratio was obtained by which the optimum blend ratio was 72/28 percent of PP/PBT alloy fiber composition. In all alloy fiber dyed samples uniform coloration was observed. No considerable changes in the mechanical properties for dyed samples against undyed samples were observed. Interestingly, the best mechanical property among alloy fiber samples was observed in the sample containing 30 percent PBT dispersed phase which approximately corresponds to optimum blend ratio gained from mathematical calculations. In all PP/PBT alloy fiber samples strong fastness to soaping and very good to excellent fastness to light were achieved.     

Potential neoplastic e ects of parathion-methyl on rat liver

The mutagenic and carcinogenic e ects of parathion-methyl were examined by bacterial reverse mutation assay and a long-term experiment with wistar rats. The potential mutagenic e ect of parathion-methyl in Salmonella typhimurium TA100 bacterial cells was observed without rat liver S9 metabolic activation. Parathion-methyl was further investigated for pathological changes in rat pancreas and liver. The long-term rat experiments showed that parathion-methyl exposure for 3 months can cause pathological changes in rat pancreases acinar cells and pancreatic hepatocytes. Atypical acinar cell focuses (AACF) were determined in the liver and pancreas of the rats. The results from short-term Ames test and long-term rat experiments suggested that parathion-methyl would be potential carcinogenic.     

Mitigation of climate change impacts on maize productivity in northeast of Iran: a simulation study

Development and evaluation of mitigation strategies are fundamental to manage climate change risks. This study was built on (1) quantifying the response of maize (Zea mays L.) grain yield to potential impacts of climate change and (2) investigating the effectiveness of changing sowing date of maize as a mitigation option for Khorasan Province which is located in northeast of Iran. Two types of General Circulation Models (GCM: (United Kingdom Met Office Hadley Center :HadCM3) and (Institute Pierre Simon Laplace: IPCM4)) and three scenarios (A1B, A2 and B1) at four locations (Mashhad, Birjand, Bojnourd and Sabzevar) employed in this study. Long Ashton Research Station-Weather Generator (LARS-WG) was employed for generating the future climate. The Cropping System Model (CSM)-CERES-Maize was used for crop growth simulation under projected climate conditions. The results showed the simulated grain yields of maize gradually would decrease (from −1% to −39%) during future 100 years compared to baseline under different scenarios and two GCM at all study locations. The simulation results suggested that delayed sowing date from May to June at all study locations, except Sabzevar location is the most effective mitigation option for avoiding thermal stress at end of growth period. In addition, shifting in sowing date to March or April will be beneficial in terms of obtaining higher yields in Sabzevar. Grain yield did not show special trend from north to south of Khorasan Province in the future climate. In general, change of sowing date may be quite beneficial to mitigate climate change impacts on grain yield of maize in northeast of Iran.     

Future production of rainfed wheat in Iran (Khorasan province): climate change scenario analysis

Projecting staple crop production including wheat under future climate plays a fundamental role in planning the required adaptation and mitigation strategies for climate change effects especially in developing countries. The main aim of this study was to investigate the direction and magnitude of climate change impacts on grain yield of rainfed wheat (Triticum aestivum L.) production and precipitation within growing season. This study was performed for various regions in Khorasan province which is located in northeast of Iran. Climate projections of two General Circulation Models (GCM) for four locations under three climate change scenarios were employed in this study for different future time periods. A stochastic weather generator (LARS-WG5) was used for downscaling to generate daily climate parameters from GCMs output. The Decision Support System for Agrotechnology Transfer (DSSAT) Version 4.5 was employed to evaluate rainfed wheat performance under future climate. Grain yield of rainfed wheat and precipitation during growth period considerably decreased under different scenarios in various time periods in contrast to baseline. Highest grain yield and precipitation during growth period was obtained under B1 scenario but A1B and A2 scenarios resulted in sharp decrease (by ?57 %) of grain yield. Climate change did not have marked effects on evapotranspiration during the rainfed wheat growth. A significant correlation was detected between grain yield, precipitation and evapotranspiration under climate change for both GCMs and under all study scenarios. It was concluded, that rainfed wheat production may decline during the next 80 years especially under A2 scenario. Therefore, planning the comprehensive adaptation and mitigation program is necessary for avoiding climate change negative impact on rainfed wheat production.     

Pasture diversification to combat climate change impacts on grazing dairy production

Among livestock systems, grazing is likely to be most impacted by climate change because of its dependency to feed quality and availability. In order to reduce the impact of climate change on grazing livestock systems, adaptation measures should be implemented. The goal of this study is to identify the best pasture composition for a representative grazing dairy farm in Michigan in order to reduce the impacts of climate change on production. In order to achieve the goal of this study, three objectives were sought: (1) identify the best pasture composition, (2) assess economic and resource use impacts of pasture compositions under future climate scenarios, and (3) evaluate the resiliency of pasture compositions. A representative farm was developed based on a livestock practices survey and incorporated into the Integrated Farm System Model (IFSM). For the pasture compositions, four cool-season grass species and two legumes were evaluated under both current and future climate scenarios. The effectiveness of adaptation measures based on economic and resource use criteria was evaluated. Overall, the pasture composition with 50% perennial ryegrass (Lolium multiflorum) and 50% red clover (Trifolium pratense) was identified as the best. In addition, the increase in precipitation and temperature of the most intensive climate scenario could significantly improve farm net return per cow (Bos taurus) and whole farm profit while no significant impact was observed on resource use criteria. Finally, the overall sensitivity assessment showed that the most resilient pasture composition under future climate scenarios was ryegrass with red clover and the least resilient was orchardgrass (Dactylis glomerata) with white clover (Trifolium repens).