A comparative study of biopolymers and alum in the separation and recovery of pulp fibres from paper mill effluent by flocculation

Recovery of cellulose fibres from paper mill effluent has been studied using common polysacchatides or biopolymers such as Guar gum, Xanthan gum and Locust bean gum as flocculent. Guar gum is commonly used in sizing paper and routinely used in paper making. The results have been compared with the performance of alum, which is a common coagulant and a key ingredient of the paper industry. Guar gum recovered about 3.86 mg/L of fibre and was most effective among the biopolyrners. Settling velocity distribution curves demonstrated that Guar gum was able to settle the fibres faster than the other biopolymers; however, alum displayed the highest particle removal rate than all the biopolymers at any of the settling velocities. Alum, Guar gum, Xanthan gum and Locust bean gum removed 97.46%, 94.68%, 92.39% and 92.46% turbidity of raw effluent at a settling velocity of 0.5 cm/min, respectively. The conditions for obtaining the lowest sludge volume index such as pH, dose and mixing speed were optimised for guar gum which was the most effective among the biopolymers. Response surface methodology was used to design all experiments, and an optimum operational setting was proposed. The test results indicate similar performance of alum and Guar gum in terms of fioc settling velocities and sludge volume index. Since Guar gum is a plant derived natural substance, it is environmentally benign and offers a green treatment option to the paper mills for pulp recycling.     

Passive aerated in-vessel composting of food waste with the addition of Sabah ragi for campus sustainability: mass balance,dwarf crape jasmine growth and techno-economic study

Journal of Material Cycles and Waste Management - Composting is a sustainable solution on campus for waste management as it is essential for achieving the ideal circular economy. This study aims to...     

Source apportionment of surfactants in marine aerosols at different locations along the Malacca Straits

This study aims to determine the source apportionment of surfactants in marine aerosols at two selected stations along the Malacca Straits. The aerosol samples were collected using a high volume sampler equipped with an impactor to separate coarse- and fine-mode aerosols. The concentrations of surfactants, as methylene blue active substance and disulphine blue active substance, were analysed using colorimetric method. Ion chromatography was employed to determine the ionic compositions. Principal component analysis combined with multiple linear regression was used to identify and quantify the sources of atmospheric surfactants. The results showed that the surfactants in tropical coastal environments are actively generated from natural and anthropogenic origins. Sea spray (generated from sea-surface microlayers) was found to be a major contributor to surfactants in both aerosol sizes. Meanwhile, the anthropogenic sources (motor vehicles/biomass burning) were predominant contributors to atmospheric surfactants in fine-mode aerosols.     

Characterization and antiinflammatory properties of fractionated pyroligneous acid from palm kernel shell

Environmental Science and Pollution Research - Pyroligneous acid (PA) obtained from slow pyrolysis of palm kernel shell (PKS) has high total phenolic contents and exhibits various biological...     

Prospect of abandoned metal mining sites from a hydrogeochemical perspective

Environmental Science and Pollution Research - Land exploitation for mining sector may leave a series of environmental impacts on our ecosystem if not appropriately managed. Therefore, the present...     

A statistical model to predict and analyze air surface temperature based on remotely sensed observations

Environmental Science and Pollution Research - Air surface temperature (AST) is a crucial importance element for many applications such as hydrology, agriculture, and climate change studies. The...     

Fungicide tolerant Bradyrhizobium japonicum mitigate toxicity and enhance greengram production under hexaconazole stress

Bacterial strain RV9 recovered from greengram nodules tolerated 2400 μg/mL of hexaconazole and was identified by 16 S rDNA sequence analysis as Bradyrhizobium japonicum(KY940048). Strain RV9 produced IAA(61.6 μg/mL), ACC deaminase(51.7 mg/(protein·hr)), solubilized TCP(105 μg/mL), secreted 337.6 μg/mL EPS, and produced SA(52.2 μg/mL) and 2,3-DHBA(28.3 μg/mL). Exopolysaccharides produced by strain RV9 was quantified and characterized by SEM, AFM, EDX and FTIR. Beyond tolerance limit,hexaconazole caused cellular impairment and reduced the viability of strain RV9 revealed by SEM and CLSM. Hexaconazole distorted the root tips and altered nodule structure leading thereby to reduction in the performance of greengram. Also, the level of antioxidant enzymes, proline, TBARS, ROS and cell death was increased in hexaconazole treated plants.CLSM images revealed a concentration dependent increase in the characteristic green and blue fluorescence of hexaconazole treated roots. The application of B. japonicum strain RV9 alleviated the fungicide toxicity and improved the measured plant characteristics. Also,rhizobial cells were localized inside tissues as revealed by CLSM. Colonization of B.japonicum strain RV9 decreased the levels of CAT, POD, APX, GPX and TBARS by 80%, 5%,13%, 13% and 19%, respectively over plants grown at 80 μg/(hexaconazole·kg) soil. The ability to detoxify hexaconazole, colonize plant tissues, secrete PGP bioactive molecules even under fungicide pressure and its unique ability to diminish oxidative stress make B.japonicum an attractive choice for remediation of fungicide polluted soils and to concurrently enhance greengram production under stressed environment.     

Membrane Fouling in Microfiltration of Sanitary Landfill Leachate for Removals of Colourand Solids

In this research,the treatability of solids from sanitary landfill leachate by microfiltration membrane was investigated and the fouling of the membrane was carefully studied.Continuous microfiltration process was carried out for 21 h in experimental system involved coagulation with Moringa oleifera followed by filtration using submerged hollow fibre microfiltration membrane (MFM).Coagulation with M.Oleifera,air diffusers and back flush technique were used for preventing or alleviating fouling of the membrane.The hollow fibre MFM showed high removals of 98%,91% and 99% for turbidity,colour and total suspended solids respectively.It was obtained at the beginning of the filtration.However,quality of the filtrate rapidly declined during the filtration process.Fouling was found to proceed according to the classical cake filtration model.Coagulation with M.Oleifera as well as the back-flush technique could not fully restore the deterioration occurred to the membrane.