Site security for chemical process industries

Chemical process industries such as oil refineries, fertiliser plants, petrochemical plants, etc., which handle hazardous chemicals, are potential targets for deliberate actions by terrorists, criminals and disgruntled employees. Security risks arising out of these threats are real and must be assessed to determine whether the security measures employed within the facility are adequate or need enhancement. The essential steps involved are threat analysis, vulnerability analysis, security countermeasures, and emergency response. Threat analysis involves the study of identifying sources, types of threats, and their likelihood. Vulnerability analysis identifies the weaknesses in a system that adversaries can exploit. Depending on the threat likelihood and vulnerabilities, various security countermeasures are suggested to improve the plant security. Appropriate emergency response measures that could mitigate the consequences of a successful attack and concepts of inherently safer processes in the light of process security are also discussed in the paper. It is recognised that serious terrorist threats exist to the transport system of hazardous chemicals (by road, rail cars, ships, pipelines, etc.). However, that is not a part of this study, which concentrates on process plants and hazardous materials within immovable boundaries. A case study of a fertiliser plant is used to show the application of ideas presented.     

Carbon storage potential in natural fiber composites

The environmental performance of hemp based natural fiber mat thermoplastic (NMT) has been evaluated in this study by quantifying carbon storage potential and CO₂ emissions and comparing the results with commercially available glass fiber composites. Non-woven mats of hemp fiber and polypropylene matrix were used to make NMT samples by film-stacking method without using any binder aid. The results showed that hemp based NMT have compatible or even better strength properties as compared to conventional flax based thermoplastics. A value of 63 MPa for flexural strength is achieved at 64% fiber content by weight. Similarly, impact energy values (84–154 J/m) are also promising. The carbon sequestration and storage by hemp crop through photosynthesis is estimated by quantifying dry biomass of fibers based on one metric ton of NMT. A value of 325 kg carbon per metric ton of hemp based composite is estimated which can be stored by the product during its useful life. An extra 22% carbon storage can be achieved by increasing the compression ratio by 13% while maintaining same flexural strength. Further, net carbon sequestration by industrial hemp crop is estimated as 0.67 ton/h/year, which is compatible to all USA urban trees and very close to naturally, regenerated forests. A comparative life cycle analysis focused on non-renewable energy consumption of natural and glass fiber composites shows that a net saving of 50 000 MJ (3 ton CO₂ emissions) per ton of thermoplastic can be achieved by replacing 30% glass fiber reinforcement with 65% hemp fiber. It is further estimated that 3.07 million ton CO₂ emissions (4.3% of total USA industrial emissions) and 1.19 million m³ crude oil (1.0% of total Canadian oil consumption) can be saved by substituting 50% fiber glass plastics with natural fiber composites in North American auto applications. However, to compete with glass fiber effectively, further research is needed to improve natural fiber processing, interfacial bonding and control moisture sensitivity in longer run.     

Indexing method for assessment of pollution potential of leachate from non-engineered landfill sites and its effect on ground water quality

Dumping of solid waste in a non-engineered landfill site often leads to contamination of ground water due to leachate percolation into ground water. The present paper assesses the pollution potential of leachate generated from three non-engineered landfill sites located in the Tricity region (one each in cities of Chandigarh, Mohali and Panchkula) of Northern India and its possible effects of contamination of groundwater. Analysis of physico-chemical properties of leachate from all the three landfill sites and the surrounding groundwater samples from five different downwind distances from each of the landfill sites were collected and tested to determine the leachate pollution index (LPI) and the water quality index (WQI). The Leachate Pollution Index values of 26.1, 27 and 27.8 respectively for landfill sites of Chandigarh (CHD), Mohali (MOH) and Panchkula (PKL) cities showed that the leachate generated are contaminated. The average pH values of the leachate samples over the sampling period (9.2 for CHD, 8.97 for MOH and 8.9 for PKL) show an alkaline nature indicating that all the three landfill sites could be classified as mature to old stage. The WQI calculated over the different downwind distances from the contamination sites showed that the quality of the groundwater improved with an increase in the downwind distance. Principal component analysis (PCA) carried out established major components mainly from natural and anthropogenic sources with cumulative variance of 88% for Chandigarh, 87.1% for Mohali and 87.8% for Panchkula. Hierarchical cluster analysis (HCA) identifies three distinct cluster types for the groundwater samples. These clusters corresponds to a relatively low pollution, moderate pollution and high pollution regions. It is suggested that all the three non-engineered landfill sites be converted to engineered landfill sites to prevent groundwater contamination and also new sites be considered for construction of these engineered landfill sites as the present dumpsites are nearing the end of their lifespan capacity.     

Experimental evaluation of the catalytic efficiency of calcium based natural and modified catalyst for biodiesel synthesis

Transesterification of a mixture of vegetable oils with methanol using metal oxide catalysts derived from snail shell (SS) for biodiesel production was investigated. The metal oxides obtained from calcined snail shells in the temperature range of 650°–950 °C and modified by loading different potassium salts were used as a catalyst in the process. The catalysts were characterized by FT-IR, XRD, SEM-EDS, XPS and TGA. Catalytic activities of developed catalysts were also tested by Hammet indicator method and ion exchange method. The best calcination conditions were observed at 850°C for 4 hours based on biodiesel yield. The KF loaded snail shell gave highest biodiesel yield of 98 ± 1% in a batch reactor with highest basicity (15.9 mmoles/g) and basic strength measured by Hammet method. The optimized reaction conditions were: reaction temperature 65°C, reaction time 3 hours, methanol to oil molar ratio 9:1 and catalyst concentration 3wt%. Leaching and reusability tests confirm the stability of the catalyst as it encounters only 3% of leaching and small changes in catalytic activity up to five runs in terms of biodiesel yield.     

Effect of size variation of fibre-shaped waste tyre rubber as fine aggregate on the ductility of self-compacting concrete

Environmental Science and Pollution Research - Abandoning shredded waste tyre rubber (WTR) in cement-based mixes facilitates safe waste tyre disposal and conserves the natural resources used in...     

Metal Accumulation by Riverine and Lacustrine Populations of Angulyagra Oxytropis (Benson) (Gastropoda : Viviparidae)

Cadmium, chromium, iron, manganese, nickel, lead and zinc concentrations were determined in sediment and body tissues, viz. digestive gland, mantle and shell, of the freshwater snail, Angulyagra oxytropis (Benson) (Gastropoda : Viviparidae), from River Barak and one of its floodplain lakes in Cachar district, Assam State, Northeastern India. The concentrations of all the metals except iron are significantly higher in the lake sediment. When compared to their riverine counterparts, the lacustrine snails contain higher concentrations of cadmium, chromium and iron in their mantle; nickel and zinc in digestive gland; manganese in both digestive gland and mantle; and lead in all the three tissues examined. The accumulation patterns of most of the metals varied considerably between the two sites. The implications of these findings in storage, sequestration and detoxification of metals by this animal are discussed. The study also indicates that A. oxytropis may be a potential biological indicator of metal contamination in freshwater ecosystems.     

Calibration and Validation of Far Field Dilution Models for Outfall at Worli, Mumbai

The city of Mumbai, India with a population of 15 million discharges about 2225 MLD of domestic wastewater after partial treatment to adjoining marine water body. Under the Mumbai Sewage Disposal Project Scheme, sewage is being disposed to the west coast at Worli and Bandra through 3.4 kms long submarine outfalls. A field study was conducted at recently commissioned outfall diffuser location at Worli, at the onset of neap flood tide to study the dispersion patterns and measure the far field dilutions using radio and dye tracers. Estimated dilutions using different tracers were compared with outputs from an empirical model (Brooks) and a 2D numerical model (DIVAST). Validation using parameters such as BOD and FC, indicated a good match for BOD in near field compared to FC. The radiotracer ⁸²Br and Rhodamine WT generally gave good correlation with Brooks' and DIVAST models for nearfield, however at further distances predictions were not accurate.     

Interdimensional correlations in individual and dyadic performance ratings

Performance rating research about individual performance may not necessarily generalize to rating performance of dyads. Using data from the 1992 Winter Olympics, this study demonstrates that observed interdimensional correlations are higher when dyads rather than individuals are being rated, particularly when raters have the opportunity to form prior general impressions of ratees. Implications of these results are discussed. © 1998 John Wiley & Sons, Ltd.     

Adsorption characteristics of Cu and Ni on Irish peat moss

Peat has been widely used as a low cost adsorbent to remove a variety of materials including organic compounds and heavy metals from water. Various functional groups in lignin allow such compounds to bind on active sites of peat. The adsorption of Cu(2+) and Ni(2+) from aqueous solutions on Irish peat moss was studied both as a pure ion and from their binary mixtures under both equilibrium and dynamic conditions in the concentration range of 5-100mg/L. The pH of the solutions containing either Cu(2+) or Ni(2+) was varied over a range of 2-8. The adsorption of Cu(2+) and Ni(+2) on peat was found to be pH dependent. The adsorption data could be fitted to a two-site Langmuir adsorption isotherm and the maximum adsorption capacity of peat was determined to be 17.6 mg/g for Cu(2+) and 14.5mg/g for Ni(2+) at 298 K when the initial concentration for both Cu(2+) and Ni(2+) was 100mg/L, and the pH of the solution was 4.0 and 4.5, respectively. Column studies were conducted to generate breakthrough data for both pure component and binary mixtures of copper and nickel. Desorption experiments showed that 2mM EDTA solution could be used to remove all of the adsorbed copper and nickel from the bed.     

Enrichment and fractionation of heavy metals in bed sediments of River Narmada, India

A metal fractionation study on bed sediments of River Narmada in Central India has been carried out to examine the enrichment and partitioning of different metal species between five geochemical phases (exchangeable fraction, carbonate fraction, Fe/Mn oxide fraction, organic fraction and residual fraction). The river receives toxic substances through a large number of tributaries and drains flowing in the catchment of the river. The toxic substances of particular interest are heavy metals derived from urban runoff as well as municipal sewage and industrial effluents. Heavy metals entering the river get adsorbed onto the suspended sediments, which in due course of time settle down in the bottom of the river. In this study fractionation of metal ions has been carried out with the objective to determine the eco-toxic potential of metal ions. Although, in most cases (except iron) the average trace/heavy metal concentrations in sediments were higher than the standard shale values, the risk assessment code as applied to the present study reveals that only about 1–3% of manganese, <1% of copper, 16–19% of nickel, 4–20% of chromium, 1–4% of lead, 8–13% of cadmium and 1–3% of zinc exist in exchangeable fraction and therefore falls under low to medium risk category. According to the Geo-accumulation Index (GAI), cadmium shows high accumulation in the river sediments, rest of other metals are under unpolluted to moderately polluted class.