The effect of pH on zinc adsorption equilibria and exchangeable zinc pools in soils

Zinc adsorption equilibria were measured in soils differing in pH but with similar textures and total zinc concentrations, using adsorption isotherm and isotopic exchange techniques. The results suggested that the equilibrium between solution and exchangeable zinc was strongly pH dependent and the active zinc species in adsorption was single charged (e.g. Zn(OH)(+)). The size of the exchangeable zinc pool was not strongly pH dependent. Similar results were obtained when zinc was added to the soils, either as Zn(NO(3))(2) or in sewage sludge.     

Contamination of polycyclic aromatic hydrocarbons (PAHs) in microlayer and subsurface waters along Alexandria coast,Egypt

The residues of seven polycyclic aromatic hydrocarbons (PAHs) pollutants in microlayer and subsurface seawater samples collected from Alexandria coast, Egypt, were analyzed by gas chromatography–electron-impact mass spectrometry-selected ion monitoring mode (GC–MS-SIM). The pollutants studied were, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, chrysene and benzo[a]pyrene. Total PAH levels in microlayer ranged from 103 to 523 ng/l, while it ranged in subsurface samples from 13 to 120 ng/l. The Western Harbor location recorded the highest level of PAHs pollutant over all the other location for both subsurface and microlayer waters. The two major PAHs in microlayer water at the Western Harbor were fluorene and phenanthrene, making up 27% and 20% of the total PAHs, while the two major PAHs in subsurface water at the Eastern Harbor were phenanthrene and fluoranthene recording up 21% each of the total PAHs. The total PAH levels were generally in the nano-gram per liter for microlayer and subsurface seawater samples. The dominant PAHs in both subsurface and microlayer samples were fluoranthene, pyrene and benzo[a]pyrene. The microlayer enrichment factor at Alexandria’s Mediterranean coast was ranged from 29 for fluorene to 3 for phenanthrene and benzo[a]pyrene which showed PAHs concentration in the microlayer with an average of five times more than the total PAH in the subsurface samples.     

Releases of phosphate fertilizer industry in the surrounding environment: Investigation on heavy metals and polonium-210 in soil

Distribution of Cu,Zn,Pb,Cr,Ni,Mn concentrations and the activity of polonium-210 in the surrounding area of a phosphate fertilizer industry located on the eastern coast of the Mediterranean Sea has been determined.Nineteen sampling sites were distributed around the industrial zone on a surface area of about 100,000 m2.Atomic absorption spectroscopy and Alpha spectroscopy were used to quantify the heavy elements and polonium-210,respectively.Investigation on a particle scale was conducted by TEM and SEM coupled to EDX and X-ray cartography to determine the nature of heavy elements carriers and their distribution.Heavy elements were mainly concentrated inside the particle size fraction 50 μm.Their levels decreased with distance increasing from the industry.According to the reference soil,enrichment factors were about 10,15,32 and 100 times for Zn,Pb,Cu,and Cr,respectively inside the particle size fraction 50 μm on the closest sites to the industry.The main contaminant sources were transport and storage of row materials and the free release of phosphogypsum waste.Heavy elements were entrapped inside agglomerates of sulfates,phosphates and iron oxihydroxides in a di used shape.Polonium-210 with an enrichment factor of about 56,showed the same behavior of the spatial distribution of the trace elements.     

Earthworm Aporrectodea molleri (oligochaeta)’s coelomic fluid-associated bacteria modify soil biochemical properties and improve maize (Zea mays L.) plant growth under abiotic stress conditions

Environmental Science and Pollution Research - This study evaluated the impact of Aporrectodea molleri's coelomic fluid-associated bacteria (CFB) on Zea mays L. growth and soil biochemical...     

Anaerobic digestion of agro-industrial waste enriched with bovine bone meal for improved biogas production and biofertilization

The increase in animal and agro-industrial production must be accompanied by the development of appropriate waste and by-product management strategies. Anaerobic digestion is a promising approach to recycle these wastes and reintegrate them into the economic production cycle of biogas and biofertilizer. In order to improve the performance of the anaerobic mesophilic digestion of abundant agro-industrial wastes constituted by potato peel (PP), and poultry waste (PW) and study the contribution of bovine bone meal (BB) as additive rich in phosphorus, which can help to neutralize the acidity of the substrate. The 10-point simplex-centroid design and the isoresponse surfaces strategy were used. This study demonstrated that in mesophilic bio-digestion, the using bovine bones in admixture with agroindustrial residue provided for the proper balance of chemical components required for proliferation of microbiological agent of bioconversion, which also resulted in an increase in biogas production capacity. The best formula was so composed by 66.67% bovine bone, 16.67% potatoes peel, and 16.67% poultry waste. The stability was achieved here after only 12 days. The digestate generated from it was fulfilled with the microbiological and chemical requirements for safety defined by the NF U44-551 standard. Germination test revealed that this optimal produced digestate, did not hinder growth, in fact, almost 85% of seed was germinated. Finally, fertilization experiments prove that this digestate can boost the growth of bell pepper (Capsicum annuum).     

Trihalomethanes formation in water treatment plants and distribution lines: a monitoring and modeling scheme

Monitoring and modeling of the concentrations of trihalomethanes (THMs) within four water treatment plants (WTPs) and distribution lines in Fayoum City, Egypt, were studied. Sampling sites for raw and treated waters were determined by global positioning system and the Arc geographic information system software was used for mapping. THMs were monitored using 25 sampling points located at the plant exit and through the distribution lines up to the plant extremity. Results indicated that the THMs concentration varied significantly but it was very rarely higher than the allowed maximum contaminant level of 100 μg L^?1. However, at the dead zones in the distribution lines, the THMs increased by about 160% compared to in-plant level. Furthermore, the level of THMs in hot months was about 1.3 times higher than in cold ones. The influence of some independent variables such as temperature, pH, ammonia concentration, total organic carbon and color were investigated by Pearson model to find their correlation with the rate of THMs formation in WTPs. The resulted R values ranged from 0.81 to 0.98. Successful application of the model to a selected region on the distribution lines has resulted in a correlation coefficient of 0.98.     

Factors affecting the distribution of trace elements in harbour sediments

A large number of data (n=488) were acquired from 2003 to 2006 for five Italian harbours and three control areas to determine trace element (Al, As, Cd, Cu, Zn, Pb, Hg, Cr, and Ni) levels in sediments. Results were utilised to evaluate, on a multivariate statistical basis, pollution levels, significant relationships between observed levels and specific factors, and enrichment factors. Of the factors tested, main human use of harbour, was best able to determine segregations in the observed trace element fingerprints. Compared with the concentration limit approach, the evaluation of enrichment factors, even if affected by mathematical approximations, represented a useful tool for environmental studies, allowing evaluation of the presence of sediments enriched by human activities and reducing the occurrence of both false positives and false negatives due to natural differences in aluminosilicate levels.     

Analysis of Total Work Inability in Poland in 2000 and 2001 According to Age,Disease Diagnosis and Occupation

This study was to determine the main health-related reasons, age and occupation of those who took ear retirement due to total work inability. This was done through an analysis of the data from Poland’s Soci Insurance Institution (ZUS) from 2000 and 2001. An analysis of these data showed an increase in the numb of certificates confirming total inability to work in people over 40 years old. Over 50% of certificates wo, were issued to workers in 2 age-groups: 45–49 and 50–54.

Diseases of the circulatory system, musculoskeletal system and connective tissue as well as mental and behavioural disorders are the main causes of early inability to work. Approximately 70% of people who obtained certificates confirming total inability to work had blue- and blue-and-white-collar jobs.     

Occupational Exposure to Natural UV Radiation and Premature Skin Ageing

The skin is the part of the human body most vulnerable to ultraviolet (UV) radiation. The spectrum of the negative effects of UV radiation on the skin ranges from acute erythema to carcinogenesis. Between these extreme conditions, there are other common skin lesions, e.g.,photoageing. The aim of this study was to assess the skin for signs of photoageing in a group of 52 men occupationally exposed to natural UV radiation. There were 2 types of examinations: an examination of skin condition (moisture, elasticity, sebum, porosity, smoothness, discolourations and wrinkles) with a device for diagnosing the skin, and a dermatological examination. The results of both examinations revealed a higher percentage of skin characteristics typical for photoageing in outdoor workers compared to the general population.     

Vulnerability assessment and adaptation to the impacts of sea level rise on the Kingdom of Bahrain

This paper assesses quantitatively the impact of sea level rise (SLR) at the global and regional scale as a result of climate change (CC) on the coastal areas of the Kingdom of Bahrain’s islands (36 Islands). The standard Intergovernmental Panel on Climate Change (IPCC) guidelines was modified as appropriate for the situation of the study area. Geographic Information Systems (GIS) coupled with Remote Sensing (RS) were used as the main techniques of collecting, analyzing, modeling simulating and disseminating information to build SLR scenarios in a geographically referenced context. Also, these tools were used to assess vulnerability and risk of the coastal area of the islands with the expectation that coastal planner and government authorities will profit from integrating these knowledge into a broad based environmental decision making. Three SLR scenarios: low, moderate and high were developed to examine the impacts from SLR on all islands. The low SLR scenario (Optimistic) assumes a 0.5-m rise above current sea level, the moderate scenario (Intermediate) assumes a one meter rise, and the high scenario (Pessimistic) assumes a 1.5 m rise in sea level. Two more SLR scenarios were assumed to perform risk analysis, a 2 and 5 meter rise above current sea level. The simulation of SLR are quite straightforward, emphasizing on the uses of both of the data that are incorporated from the satellite images and the created Digital Elevation Model (DEM) to estimate SLR scenarios that are adapted in the study. These data were used to predict consequences of the possibility of the rise in sea level at different scenarios which may alter the landuse and patterns of human communities. Results indicate that low-lying coastal areas of Bahrain islands are at risk from the effects of any SLR resulting from CC. These islands are vulnerable under different SLR Scenarios. More than 17% of the country total area may be inundated under 1.5 m SLR in 2100. The total area that might be lost under different sea level scenarios will vary from more than 77 km² if SLR reaches 0.5 m, to about 100 km² under 1.0 m SLR and may reach 124 km² under 1.5 m SLR scenario. The total inundated areas due to risk scenarios will reach 133 km², if the SLR rises to 2.0 m, and it is estimated to be more than (22%) of the main island total area. Under the second scenario, if the SLR reaches 5.0 m, the main islands will lose approximately half of its area (47%) equal to 280 km². Hawar islands group will lose about (30%) of its total area under 2.0 m SLR, which is about 15.5 km².A SLR adaptation policy framework (APF) and adaptation policy initiatives (APIs) are suggested for planners to build upon for reducing the likely effects of SLR in the Kingdom of Bahrain. The framework is composed of four steps namely, acquisition of information, planning and design, implementation and monitoring and evaluation. A general policy framework for a national response to SLR is suggested. Additionally, a range of policy adaptation options/initiatives to sustain coastal developments under the likely effects of SLR are recommended.