Ceramic processing of incinerator bottom ash

The <8 mm fraction of aged incinerator bottom ash from a commercial incinerator (energy from waste) plant has been collected at regular intervals, characterised and processed to form ceramic materials. Ashes were sieved, wet ball milled, dried, compacted and sintered at temperatures between 1080 and 1115 degrees C. Variations in the chemical composition and mineralogy of the milled ash, and the mineralogy, physical properties and leaching of sintered products have been assessed. Milling produces a raw material with consistent chemical and mineralogical composition with quartz (SiO(2)), calcite (CaCO(3)), gehlenite (Ca(2)Al(AlSi)O(7)) and hematite (Fe(2)O(3)) being the major crystalline phases present. Different batches also milled to give consistent particle size distributions. Sintering milled incinerator bottom ash at 1110 degrees C produced ceramics with densities between 2.43 and 2.64 g/cm(-3) and major crystalline phases of wollastonite (CaSiO(3)) and diopside (CaMgSi(2)O(6)). The sintered ceramics had reduced acid neutralisation capacity compared to the as-received ash and exhibited reduced leaching of Ca, Mg, Na and K under all pH conditions. The leaching of heavy metals was also significantly reduced due to encapsulation and incorporation into glassy and crystalline phases, with Cu and Al showing greatly reduced leaching under alkali conditions.     

Recycled Polyethylene Composites Reinforced with Jute Fabric from Sackcloth: Part I-Preparation and Preliminary Assessment

In recent times, environmental safety has been on priority in the development of new materials leading to a recycling and reuse approach to conserve the materials resources. This has resulted in more focus on the application of natural materials such as lignocellulosic fibers. This paper presents the characterization of continuous and aligned jute fabrics obtained from new and used sacks as well as the preparation and characterization of their composites incorporated into recycled polyethylene or as isolated pieces up to 40 wt%. These environmentally friendly composites were subjected to bend test and the fracture surface analyzed by SEM. The fabric from new sacks showed greater damage tolerance than that from the used sacks. The flexural stress increased steadily with increasing used fabric content up to 30 wt%, which is explained using fractographic studies on ruptured specimens. Used jute fabric composites are found to be viable alternative materials for low strength conventional materials based on cost–performance comparison with conventional materials.     

Can preferential credit programs speed up the adoption of low-carbon agricultural systems in Mato Grosso,Brazil? Results from bioeconomic microsimulation

The need to balance agricultural production and environmental protection shifted the focus of Brazilian land-use policy toward sustainable agriculture. In 2010, Brazil established preferential credit lines to finance investments into low-carbon integrated agricultural systems of crop, livestock and forestry. This article presents a simulation-based empirical assessment of integrated system adoption in the state of Mato Grosso, where highly mechanized soybean–cotton and soybean–maize double-crop systems currently prevail. We employ bioeconomic modeling to explicitly capture the heterogeneity of farm-level costs and benefits of adoption. By parameterizing and validating our simulations with both empirical and experimental data, we evaluate the effectiveness of the ABC Integration credit through indicators such as land-use change, adoption rates and budgetary costs of credit provision. Alternative scenarios reveal that specific credit conditions might speed up the diffusion of low-carbon agricultural systems in Mato Grosso.

     

Influence of Traffic Emissions Estimation Variability on Urban Air Quality Modelling

The main objective of this work is to analyse how uncertainties in emission data of nitrogen oxides (NO_x) and volatile organic compounds (VOC), originated from road traffic, influence the model prediction of ozone (O₃) concentration fields. Different methods to estimate emissions were applied and results were compared in order to obtain their variability. Based on these data, different emission scenarios were compiled for each pollutant considering the minimum and the maximum values of the estimated emission range. These scenarios were used as input to the MAR-IV mesoscale modelling system. Simulations have been performed for a summer day in the Northern Region of Portugal. The different approaches to estimate NO_x and VOC traffic emissions show a significant variability of absolute values and of their spatial distribution. Comparison of modelling results obtained from the two scenarios presents a dissimilarity of 37% for ozone concentration fields as a response of the system to a variation in the input emission data of 63% for NO_x and 59% for VOC. Far beyond all difficulties and approximations, the developed methodology to build up an emission data base shows to be consistent and an useful tool in order to turn applicable an air quality model. Nevertheless, the sensitivity of the model to input data should be considered when it is used as a decision support tool.     

On the basic reproduction number and the topological properties of the contact network: An epidemiological study in mainly locally connected cellular automata

We study the spreading of contagious diseases in a population of constant size using susceptible-infective-recovered (SIR) models described in terms of ordinary differential equations (ODEs) and probabilistic cellular automata (PCA). In the PCA model, each individual (represented by a cell in the lattice) is mainly locally connected to others. We investigate how the topological properties of the random network representing contacts among individuals influence the transient behavior and the permanent regime of the epidemiological system described by ODE and PCA. Our main conclusions are: (1) the basic reproduction number (commonly called _R0$R_0$) related to a disease propagation in a population cannot be uniquely determined from some features of transient behavior of the infective group; (2) _R0$R_0$ cannot be associated to a unique combination of clustering coefficient and average shortest path length characterizing the contact network. We discuss how these results can embarrass the specification of control strategies for combating disease propagations.     

Ultraviolet reflectance influences female preference for colourful males in the European serin

Avian plumage colouration is one of the most impressive displays in nature and is frequently used as sexual signal. There is now considerable evidence that females consistently prefer males with the most elaborated colour displays. Bird colour vision expands into the ultraviolet (UV) range, which prompted several studies to test the importance of UV in mate choice, revealing that females are affected by the UV light component. These studies were mostly performed on structural plumage, whereas carotenoid-based plumage was rarely considered, although it also has a typical reflection peak in the UV. Our study tested the female choice over male yellow colouration, and whether it is influenced by UV removal, in the European serin (Serinus serinus), a sexually dichromatic cardueline finch, with males showing a conspicuous carotenoid-based yellow plumage. We shows that females preferred yellower males and that male attractiveness was lost when the UV colouration was blocked, with either of the UV-blocking techniques used. The results of our study indicate that the UV component of carotenoid colouration is important in the female mate assessment in serins and highlights the importance of considering colour perception in avian mate choice.     

Work ability of workers in different age groups in a public health institution in Brazil.

OBJECTIVES: The aim of this study was to determine the associations between demographics, work, lifestyle, housework, and the work ability of workers. METHODS: Employees between the ages of 20 and 69 (N = 651), employed at a Brazilian public institution, responded to a questionnaire on demographics, work, lifestyle characteristics, and work ability. RESULTS: Work ability decreased significantly with age among the women. The younger group had higher scores on the work ability index than the older age groups, except for mental resources. The logistic regression analysis showed that higher age, lower education, and long work history at the institution were significantly associated with reduced work ability. CONCLUSIONS: The progressive aging, the low level of education, and the long duration work in the studied institution were related to a reduction in work ability, which increases the risk of work disability or early retirement.     

Photocatalytic degradation of acetaminophen and caffeine using magnetite–hematite combined nanoparticles: kinetics and mechanisms

Environmental Science and Pollution Research - The increased use of pharmaceutical and personal care products (PPCPs) has contributed to the contamination of water systems and put pressure on the...     

Effect of eight common Brazilian drugs on Lemna minor and Salvinia auriculata growth

Environmental Science and Pollution Research - The growth of two species of macrophytes (Lemna minor and Salvinia auriculata) under the effect of a mixture of amoxicillin, caffeine, carbamazepine,...