Atmospheric levels of aldehydes and BTEX and their relationship with vehicular fleet changes in Rio de Janeiro urban area

A comprehensive monitoring campaign to assess aldehydes and BTEX concentrations was performed during 12 months, in the Tijuca district (Rio de Janeiro), an area with commercial activities and a high flux of vehicles. The mean concentrations of formaldehyde and acetaldehyde were 151 and 30 ppb, respectively. The high formaldehyde/acetaldehyde ratio was attributed to extensive use of compressed natural gas (CNG). The number of CNG vehicles in the metropolitan Region of Rio de Janeiro increased from 23000 in January 2001 to 161000 in January 2005. Monitoring data show that, for the same period, methane and formaldehyde concentrations increased while NO(x) and CO levels diminished. Mean concentrations for benzene, toluene, ethylbenzene, m,p-xylene and o-xylene, were 1.1, 4.8, 3.6, 10.4 and 3.0 micro gm(-3), respectively. Benzene and toluene concentrations were lower than the values determined in 1996, for the same location. The levels of ethylbenzene and xylenes determined in this work are similar to values obtained in 1996. This fact may be explained as a consequence of changes in the gasoline composition.     

Can preferential credit programs speed up the adoption of low-carbon agricultural systems in Mato Grosso,Brazil? Results from bioeconomic microsimulation

The need to balance agricultural production and environmental protection shifted the focus of Brazilian land-use policy toward sustainable agriculture. In 2010, Brazil established preferential credit lines to finance investments into low-carbon integrated agricultural systems of crop, livestock and forestry. This article presents a simulation-based empirical assessment of integrated system adoption in the state of Mato Grosso, where highly mechanized soybean–cotton and soybean–maize double-crop systems currently prevail. We employ bioeconomic modeling to explicitly capture the heterogeneity of farm-level costs and benefits of adoption. By parameterizing and validating our simulations with both empirical and experimental data, we evaluate the effectiveness of the ABC Integration credit through indicators such as land-use change, adoption rates and budgetary costs of credit provision. Alternative scenarios reveal that specific credit conditions might speed up the diffusion of low-carbon agricultural systems in Mato Grosso.

     

Effect of eight common Brazilian drugs on Lemna minor and Salvinia auriculata growth

Environmental Science and Pollution Research - The growth of two species of macrophytes (Lemna minor and Salvinia auriculata) under the effect of a mixture of amoxicillin, caffeine, carbamazepine,...     

Disruption of hepatic mitochondrial bioenergetics is not a primary mechanism for the toxicity of methoprene - relevance for toxicological assessment

Methoprene (isopropyl(2E,4E)-11-methoxy-3,7,11-trimethyl-2,4-dodecadienoate) is an insect growth regulator generally used to control insect populations by preventing insect maturation. So far, the effects of the insecticide on mitochondrial bioenergetics were not investigated. In the present work, liver mitochondria from Wistar rats were isolated and features of mitochondrial physiology were characterized in the presence of methoprene. High concentrations of methoprene, in the range of 40-100 nmol/mg of protein could decrease the transmembrane electric potential (Delta Psi) developed by mitochondria and, at the highest concentration, methoprene prevented complete Delta Psi repolarization after ADP addition. The effect was more evident using succinate than with ascorbate+TMPD as substrate. State 3 respiration was approximately 60% inhibited by 80 nmol of methoprene/mg of protein, while state 4 respiration, within the same range of methoprene concentrations, showed a slight increase, when both glutamate-malate and succinate were used as substrates. Additionally, FCCP-stimulated respiration was inhibited to an extent comparable to the effect on state 3, which suggests an interaction of methoprene with the respiratory chain, more evident with glutamate/malate as substrate. The activity of complex I (NADH-ubiquinone oxidorreductase) and that of the segment comprehending complexes II and III (succinate-cytochrome c reductase) were decreased in the presence of methoprene (approximately 60% and 85% of inhibition, respectively, with 300 nmol of methoprene/mg of protein), while the activities of cytochrome c oxidase and ATPase do not seem to be affected. Furthermore, the action of methoprene on the mitochondrial permeability transition was also studied, showing that the insecticide (in the range of 30-80 nmol mg(-1) of protein) decreases the susceptibility of liver mitochondria to the opening of the transition pore, even in non-energized mitochondria. These results lead to the conclusion that methoprene interference with hepatic mitochondrial function occurs only for high concentrations, which implies that the noxious effects of the insecticide reported for a number of non-target organisms are not fully attributable to mitochondrial effects. Therefore, it seems that mitochondrial activity does not represent the primary target for methoprene toxic action.     

Relationship between antibiotic residues and occurrence of resistant bacteria in Nile tilapia (Oreochromisniloticus) cultured in cage-farm

The aim of this study was to investigate the relationship between antibiotic residues found in the muscle of cage-farm-raised Nile tilapia (Oreochromisniloticus), the occurrence of resistant bacteria, and the sanitary practices adopted by farmers in Ilha Solteira reservoir, Brazil. Nine fish (three small fish, 40–200 g; three medium-sized fish, 200–500 g; and three large fish, 500–800 g) were collected from four cage farms every three months from April 2013 to January 2014. Ten antibiotic residues were determined using liquid chromatography-mass spectrometry, and bacteria were isolated and tested for antibiotic resistance to determine the multiple antibiotic resistance (MAR) index. Only three antibiotics (oxytetracycline, tetracycline, and florfenicol) were detected in the muscle of Nile tilapia, and their residues were the highest in small fish; however, the MAR index was higher in large fish. In addition, a direct positive relationship between the MAR index and the concentration of antibiotic residues in Nile tilapia was found. Overall, the adoption of prophylactic management practices improved the sanitary status of cage farms, reducing bacterial infections and hampering the development of antibiotic-resistant bacteria.     

Degradation of tetracycline at a boron-doped diamond anode: influence of initial pH,applied current intensity and electrolyte

The anodic oxidation of tetracycline was performed in an up-flow reactor, operating in batch mode with recirculation, using as anode a boron-doped diamond electrode. The influence on the degradation rate of solution initial pH (2 to 12), applied current intensity (25 to 300 A m^?2) and type of electrolyte (sodium sulphate or sodium chloride) were investigated. For the assays run at equal current density, with sodium sulphate as electrolyte, the solution’s initial pH of 2 presented the highest absorbance and chemical oxygen demand removals. Regarding the influence of current density, for equal charge passed, the organic load removal rate decreased with the increase in applied current. When sodium sulphate was used as an electrolyte, high-performance liquid chromatography (HPLC) results have shown an almost complete removal of tetracycline after a 2-h assay. HPLC results have also shown the presence of oxamic acid as one of the intermediates of tetracycline anodic oxidation. The complete removal of tetracycline was much faster in the presence of chloride ions that promoted the complete degradation of this antibiotic in 30 min. However, in the presence of chloride ions, the tetracycline mineralization is slower, as observed by the lower organic carbon removal rate when compared to that of the tetracycline degradation in the presence of sulphate.     

Assessment of indoor airborne contamination in a wastewater treatment plant

The main objective of this work was to quantify and characterize the major indoor air contaminants present in different stages of a municipal WWTP, including microorganisms (bacteria and fungi), carbon dioxide, carbon monoxide, hydrogen sulfide ammonia, formaldehyde, and volatile organic compounds (VOCs). In general, the total bacteria concentration was found to vary from 60 to >52,560 colony-forming units (CFU)/m³, and the total fungi concentration ranged from 369 to 14,068 CFU/m³. Generally, Gram-positive bacteria were observed in higher number than Gram-negative bacteria. CO₂ concentration ranged from 251 to 9,710 ppm, and CO concentration was either not detected or presented a level of 1 ppm. H₂S concentration ranged from 0.1 to 6.0 ppm. NH₃ concentration was <2 ppm in most samples. Formaldehyde was <0.01 ppm at all sampling sites. The total VOC concentration ranged from 36 to 1,724 μg/m³. Among the VOCs, toluene presented the highest concentration. Results point to indoor/outdoor ratios higher than one. In general, the highest levels of airborne contaminants were detected at the primary treatment (SEDIPAC 3D), secondary sedimentation, and sludge dehydration. At most sampling sites, the concentrations of airborne contaminants were below the occupational exposure limits (OELs) for all the campaigns. However, a few contaminants were above OELs in some sampling sites.     

Air quality assessment of Estarreja, an urban industrialized area, in a coastal region of Portugal

Despite the increasing concern given to air quality in urban and industrial areas in recent years, particular emphasis on regulation, control, and reduction of air pollutant emissions is still necessary to fully characterize the chain emissions–air quality–exposure–dose–health effects, for specific sources. The Estarreja region was selected as a case study because it has one of the largest chemical industrial complexes in Portugal that has been recently expanded, together with a growing urban area with an interesting location in the Portuguese coastland and crossed by important road traffic and rail national networks. This work presents the first air quality assessment for the region concerning pollutant emissions and meteorological and air quality monitoring data analysis, over the period 2000–2009. This assessment also includes a detailed investigation and characterization of past air pollution episodes for the most problematic pollutants: ozone and PM10. The contribution of different emission sources and meteorological conditions to these episodes is investigated. The stagnant meteorological conditions associated with local emissions, namely industrial activity and road traffic, are the major contributors to the air quality degradation over the study region. A set of measures to improve air quality—regarding ozone and PM10 levels—is proposed as an air quality management strategy for the study region.     

Recycled Polyethylene Composites Reinforced with Jute Fabric from Sackcloth: Part II-Impact Strength Evaluation

Environmental problems are motivating recycling actions and reuse alternatives for materials with main focus for the application of those renewable and biodegradable materials such as lignocellulosic fibers. Composites reinforced with such fibers are being considered by several industrial sectors, not only from the environmental safety, but also from economic considerations and improved properties. This paper, which is continuation of the work (Part I) by the authors’ use of the recycled polyethylene and used jute fabrics, presents evaluation of its toughness measured by the impact energy using both Izod and Charpy methods. Fabric content used is up to 40 wt. %. It is found that the incorporation of both types (new and used) of jute fabric significantly increased the impact energy of composites, with higher values associated with the new jute fabric. Fractographic analysis revealed that weaved configuration of the jute fibers and their low interfacial resistance with the matrix are responsible for the observed impact performance of these composites.     

Modelling the photochemical pollution over the metropolitan area of Porto Alegre,Brazil

The main purpose of this study is to evaluate the photochemical pollution over the Metropolitan Area of Porto Alegre (MAPA), Brazil, where high concentrations of ozone have been registered during the past years. Due to the restricted spatial coverage of the monitoring air quality network, a numerical modelling technique was selected and applied to this assessment exercise. Two different chemistry-transport models – CAMx and CALGRID – were applied for a summer period, driven by the MM5 meteorological model. The meteorological model performance was evaluated comparing its results to available monitoring data measured at the Porto Alegre airport. Validation results point out a good model performance. It was not possible to evaluate the chemistry models performance due to the lack of adequate monitoring data. Nevertheless, the model intercomparison between CAMx and CALGRID shows a similar behaviour in what concerns the simulation of nitrogen dioxide, but some discrepancies concerning ozone. Regarding the fulfilment of the Brazilian air quality targets, the simulated ozone concentrations surpass the legislated value in specific periods, mainly outside the urban area of Porto Alegre. The ozone formation is influenced by the emission of pollutants that act as precursors (like the nitrogen oxides emitted at Porto Alegre urban area and coming from a large refinery complex) and by the meteorological conditions.