Report: Healthcare waste characterization in Chittagong Medical College Hospital, Bangladesh

Healthcare waste management (HCWM) options are inconsistent in Bangladesh. One of the first critical steps in the process of developing a reliable waste management plan requires a comprehensive understanding of the quantities and characteristics of the waste that needs to be managed. This study took into consideration both the quantity and quality of the generated waste to determine the generation rates and physical properties of healthcare waste (HCW) in Chittagong Medical College Hospital (CMCH) and also to estimate the amount of infectious and non-infectious waste generated in different wards. CMCH, the second largest hospital in Bangladesh, comprises 34 wards, 12 of which were selected randomly. Waste materials were collected from these wards and then segregated and weighed. Waste generation per day was found to be 73.22 kg/ward, 1.28 kg/bed and 0.57 kg/patient. A total of 2490 kg of HCW was produced each day in CMCH (37% being infectious and the rest being non-infectious waste). Infectious waste was 27.07 kg per ward, 0.47 kg per bed and 0.21 kg per patient and the non-infectious waste was 46.15 kg per ward, 0.81 kg per bed and 0.36 kg per patient per day. HCW comprised eight categories of waste materials with vegetable/food waste being the largest component (50.21%) and varied significantly (P < 0.05) among the 12 different wards studied. The greatest amount of HCW was recorded (154 kg) in Orthopaedics followed by 96.66 kg in the Medicine Unit-3 and the smallest amount was recorded in Casualty (8.79 kg). The amount of HCW was positively correlated with the number of occupied beds (rxy = 0.79, P < 0.01). There is no structured form of medical waste treatment in CMCH and most waste materials are dumped in open areas for natural degradation or re-sold by scavengers. It is essential to develop a national policy and implement a comprehensive action plan for HCWM that will provide environmentally sound technological measures to improve HCWM in Bangladesh.     

USING SUBSURFACE DRIP IRRIGATION FOR ALFALFA1

ABSTRACT: A test of the suitability of subsurface drip irrigation (SDI) for alfalfa (Medicago sativa L) compared to a sprinkler, was conducted on a Kansas producer's field where the soil is loam. The treatments included drip tape spacing of 60, 40, and 30 inches placed at depths of 18 and 12 inches. A nearby plot irrigated by a center pivot sprinkler was seeded to alfalfa and used for comparison. Seedling emergence and yield were adversely affected at 60 inch spacing, while the depth of placement of drip tapes (18 and 12 inches) showed no effect on yield. The site served for education and allowed comparison between SDI tape spacing and center pivot system.     

Cytogenetic evaluation of Fansidar on human lymphocyte chromosomes in vitro

Fansidar is a fixed combination of two antimalarial agents a diaminopyrimidine (Pyrimethamine) and a sulphonamide (Sulphadoxine) in the ratio 1:20- that have been used extensively worldwide for the treatment of Chloroquine resistant Plasmodium falciparum malaria, toxoplasmosis and Pneumocystis carinii pneumonia in patients with the acquired immunodeficiency syndrome. This study examined the effect of Fansidar on chromosomes in human lymphocyte culture. Fansidar was added to peripheral blood lymphocyte cultures in vitro at four different concentrations: 5,15, 25 and 50 microl in the ratio 1:20, 3:60, 5:100 and 10:200 microg ml(-1). Result shows that this drug induces moderate increase in the frequency of gaps, breaks and rearrangements. Therefore it can be concluded that Fansidar has moderate clastogenic effect on human chromosomes in vitro.     

Kinetic adsorption of application of carbon nanotubes for Pb（II） removal from aqueous solution

The capability of carbon nanotubes (CNTs) to adsorb lead (Pb) in aqueous solution was investigated. Batch mode adsorption experiment was conducted to determine the effects of pH, agitation speed, CNTs dosage and contact time. The removal of Pb(II) was reach to maximum value 85% or 83% at pH 5 or 40 mg/L of CNTs, respectively. Higher correlation coefficients from Langmuir isotherm model indicates the strong adsorptions of Pb(II) on the surface of CNTs (adsorption capacity Xm = 102.04 mg/g). From this study, the results indicates that the highest percentage removal of Pb (96.03%) can be achieved at pH 5, 40 mg/L of CNTs, contact time 80 min, and agitation speed 50 r/min.     

Estimation and comparison of night-time OH levels in the UK urban atmosphere using two di erent analysis methods

Night-time OH levels have been determined for UK urban surface environments using two methods, the decay and steady state approximation methods. Measurement data from the UK National Environmental Technology Centre archive for four urban sites (Bristol, Harwell, London Eltham and Edinburgh) over the time period of 1996 to 2000 have been used in this study. Three reactive alkenes, namely isoprene, 1,3-butadiene and trans-2-pentene were chosen for the calculation of OH levels by the decay method. Hourly measurements of NO, NO2, O3, CO and 20 VOCs were used to determine night-time OH level using the steady state approximation method. Our results showed that the night-time OH levels were in the range of 1 105–1 106 molecules/cm3 at these four urban sites in the UK. The application of a t-test of these analyses indicated that except Bristol, there was no significant di erence between the OH levels found from the decay and steady state approximation methods. Night-time levels of the OH radical appeared to peak in summer and spring time tracking the night-time O3 levels which also passed through a maximum at this time.     

Wind and wind power characteristics of the eastern and southern coastal and northern inland regions,South Africa

Environmental Science and Pollution Research - The objective of this work is to understand the fluctuating nature of wind speed characteristics on different time scales and to find the long-term...     

Preparation of Magadiite-Sodium Alginate Drug Carrier Composite by Pickering-Emulsion-Templated-Encapsulation Method and Its Properties of Sustained Release Mechanism by Baker–Lonsdale and Korsmeyer–Peppas Model

Journal of Polymers and the Environment - In this study, the nanohybrid drug carrier were synthesized by Pickering&nbsp;emulsion-templated encapsulation (PETE) method to control the...     

Microfibrillated Cellulose-Silver Nanocomposite Based PVA Hydrogels and Their Enhanced Physical,Mechanical and Antibacterial Properties

Journal of Polymers and the Environment - Modification of cellulose with silver nanoparticles produces various nanocomposites with significantly developed properties. This work aims to prepare a...     

Contamination status of arsenic,lead, and cadmium of different wetland waters

The present investigation was conducted to determine the contamination status of arsenic (As), cadmium (Cd), and lead (Pb) in the wetland waters of Bhaluka in Bangladesh. Water samples were collected from 15 selected wetlands of Bhaluka region and analyzed using an atomic absorption spectrophotometer. Estimated results of three metals detected were As (7–80?µg?L^?1), Pb (0–86?µg?L^?1) and Cd (0–70?µg?L^?1) in water samples in all wetlands. The level of As in all investigated wetlands (93%) was higher than that of WHO recommended permissible limit of drinking water except Alanga wetland. However, As levels were higher than that recommended for livestock water quality levels. Eighty-seven percent of the investigated wetlands showed lower content of Pb than WHO recommended permissible limit of drinking water, but two wetland waters (Dohuria-1 and Chowdhuri) were polluted with higher Pb levels. Sixty-seven percent of the investigated wetlands displayed higher levels of Cd than WHO recommended permissible limit in drinking water. Dissolved organic material showed no significant difference among the 15 investigated wetlands water, but total dissolved solids was significantly greater. The condition of the water of all wetlands was basic pH. All water samples were applied to linear regression equation and correlation coefficients where values showed no significant differences. Data demonstrate that the estimated high metal concentrations of these ponds may contribute to bioaccumulation within plants, food grains and shrimp.