Life cycle assessment of offset printed matter with EDIP97: how important are emissions of chemicals?

Existing product life cycle assessment (LCA) studies on offset printed matter all point at paper as the overall dominating cause of environmental impacts. All studies focus on energy consumption and the dominating role of paper is primarily based on the energy-related impact categories: global warming, acidification and nutrient enrichment. Ecotoxicity and human toxicity, which are related to emissions of chemicals, etc., are only included to a limited degree or not at all. In this paper we include the impacts from chemicals emitted during the life cycle of sheet fed offset printed matter. This is done by making use of some of the newest knowledge about emissions from the production at the printing industry combined with knowledge about the composition of the printing materials used. In cases with available data also upstream emissions from the production of printing materials are included. The results show that inclusion of the chemical emission-related impacts makes the EDIP97 impact profile of sheet fed offset products much more varied, as well for the normalised profiles as for the profiles weighted by distance to political environmental targets. Especially the ecotoxicity impact potential related to the production stage may contribute significantly, and the use of paper no longer becomes the overall dominating factor driving the environmental impacts.     

Fine particles and carbon monoxide from wood burning in 17th–19th century Danish kitchens: Measurements at two reconstructed farm houses at the Lejre Historical–Archaeological Experimental Center

Carbon monoxide (CO) and particulate matter (PM_2.5) were measured in two reconstructed Danish farmhouses (17–19th century) during two weeks of summer. During the first week intensive measurements were performed while test cooking fires were burned, during the second week the houses were monitored while occupied by guest families. A masonry hearth was located in the middle of each house for open cooking fires and with heating stoves. One house had a chimney leading to the outside over the hearth; in the other, a brickwork hood led the smoke into an attic and through holes in the roof. During the first week the concentration of PM_2.5 averaged daily between 138 and 1650 μg m^?3 inside the hearths and 21–160 μg m^?3 in adjacent living rooms. CO averaged daily between 0.21 and 1.9 ppm in living areas, and up to 12 ppm in the hearths. Highest concentrations were measured when two fires were lit at the same time, which would cause high personal exposure for someone working in the kitchens. 15 min averages of up to 25 400 μg m^?3 (PM_2.5) and 260 ppm CO were recorded. WHO air quality guidelines were occasionally exceeded for CO and constantly for PM_2.5. However, air exchange and air distribution measurements revealed a large draw in the chimney, which ensured a fast removal of wood smoke from the hearth area. The guest families were in average exposed to no more than 0.21 ppm CO during 48 h. Based on a hypothetical time-activity pattern, however, a woman living in this type of house during the 17–19th century would be exposed to daily averages of 1.1 ppm CO and 196 μg m^?3 PM_2.5, which exceeds WHO guideline for PM_2.5, and is comparable to what is today observed for women in rural areas of developing countries.     

Environmental pollutants in endangered vs. increasing subspecies of the lesser black-backed gull on the Norwegian Coast

Organochlorine (OC) residues were measured in eggs and blood of different subspecies of the lesser black-backed gull, Larus fuscus, on the Norwegian coast: a) increasing L. f. intermedius in the North Sea; b) endangered L. f. fuscus near the Arctic Circle; c) L. f. fuscus and greyish-mantled gulls, with a L. f. intermedius appearance, in the Barents Sea region. The dominating OCs in lesser black-backed gulls were polychlorinated biphenyls (PCB) and p,p'-dichlorodiphenyldichloroethylene (DDE). DDE and beta-hexachlorocyclohexane (beta-HCH) residues were higher in L. f. fuscus compared to L. f. intermedius and greyish-mantled birds in the Barents Sea region. In the latter area, blood residues of PCB and DDE in lesser black-backed gulls were as high as in great black-backed gulls, Larus marinus, while in the other regions they were lower. The higher DDE residues in endangered L. f. fuscus compared to increasing L. f. intermedius and greyish-mantled birds, which are invading northern Norway, suggest that OCs may have played a role in the population decline of L. f. fuscus, possibly in combination with nutrient stress.     

Level and origin of iodine-129 in the Baltic Sea

Environmental samples, such as seawater, seaweed, lake water, lake sediment and grass collected from the Baltic Sea area were analyzed for 129I and 127I by radiochemical neutron activation analysis. In 2000, the concentration of 129I in the seawater from Borholm and M?en in the Baltic Sea has reached 6.0 x 10(-13) and 16 x 10(-13) g/l, respectively, these are more than two orders of magnitude higher than the global fallout level. The highest value of 270 x 10(-13) g/l being found in the seawater from the Kattegat. By comparison of the level of 129I in the lake water and precipitation in this region, it is estimated that more than 95% of 129I in the Baltic Sea originates from reprocessing emissions, especially from the French nuclear fuel reprocessing plant at La Hague. More than 30% of 129I in the south Baltic and 93% in the Kattegat directly originates from the marine discharges of the European reprocessing plants.     

Differential effects of a local industrial sand lance fishery on seabird breeding performance.

Fisheries management across the world is moving toward an ecosystem-based approach, implying that fishery effects on nontarget species should be taken into account. However, such effects are often not well understood, partly because, they can be difficult to distinguish from impacts of environmental fluctuations. We evaluated the effects of an industrial sand lance (Ammodytes marinus) fishery off the North Sea coast of the United Kingdom, which has been opened and closed in a quasi-experimental fashion, on sand-lance-dependent breeding seabirds. Controlling for environmental variation (sea surface temperature, abundance of larval sand lance, and size of adult sand lance), we found that, when the fishery was operating, breeding productivity in the intensively studied seabird colony on the Isle of May was significantly depressed for one surface-feeding seabird species, the Black-legged Kittiwake (Rissa tridactyla), but not for four diving species. Analyzing Kittiwake data from 12 colonies inside and outside the closure zone in a replicated before-after control-impact design, we again found that breeding productivity was significantly depressed in the closure zone when the fishery was active, whereas no effect was found in the control zone. Furthermore, Kittiwake breeding productivity was negatively correlated with fishery effort during the fishery period in the closure zone, but not in the control zone. The contrasting findings in the two zones could be related to environmental differences or to the fact that only one study colony in the control zone was exposed to high fishery effort within the typical foraging range of Kittiwakes during the breeding season. The strong impact on Kittiwakes, but not on diving species, could result from (1) inherently high sensitivity to reduced prey availability, (2) changes in the vertical distribution of sand lance at lower densities, (3) sand lance showing avoidance behavior to fishery vessels, or a combination of some or all of these factors. These findings indicate that local fishery closures can benefit sensitive predators and should be considered as a tool for future ecosystem-based fisheries management.     

New tools and strategies for the inspection of the psychosocial working environment: The experience of the Danish Working Environment Authority

In 2007 the Danish Working Environment Authority launched a new strategy to strengthen and qualify primary prevention of work related stress. Part of the strategy consists of increased inspections of the psychosocial working environment as well as the development and implementation of a new inspection tool, namely the “guidance tool”.Twenty-four sector specific guidance tools have been developed to help WEA inspectors assess psychosocial working environment problems in all Danish enterprises. Based on recent research, the guidance tools consist, in each sector, of the three to five most important risk factors (for example quantitative demands, emotional demands, and work related violence), as well as the most important preventive factors, e.g. quality of management, influence/control and training.During the first years of the strategy, an increasing number of inspectors have issued improvement notices regarding work related stress and violence, and there has been an increasing number of notices issued on several risk factors. For some aspects, the tools have helped increase the clarity and comprehensibility of the improvement notices and reduce the WEA’s time consumption per enterprise.The guidance tools seem to be a suitable and efficient way of assessing several health and safety risks concerning work related stress and violence thereby allowing the WEA to detect more of the existing problems. Future challenges projected for the strategy include continuously training all WEA inspectors in the proper use of the tools and continuously refining the tools – or developing new tools – based on further research and experiences from practice.     

Determinants of noise annoyance in teachers from schools with different classroom reverberation times

A high proportion of school teachers report that they are disturbed by noise during teaching. The aim of the study was therefore to identify determinants of self-reported noise exposure and disturbance attributed to noise among secondary school teachers (n = 419) in 10 schools in Copenhagen, Denmark. The schools were selected to show contrasts in classroom reverberation times (RT), and were classified as “Short RT” (3 schools, mean RT 0.41–0.45 s), “Medium RT” (3 schools, mean RT 0.51–0.55 s) and “Long RT” (4 schools, mean RT 0.62–0.73 s). Significant determinants of self-reported noise exposure were a high number of children in the class, young age of the children, and low teacher seniority. “Long RT” classification was of borderline significance. Significant determinants of disturbance attributed to noise from children in the class were teacher seniority and “Long RT” acoustic classification of the school. The associations between work characteristics and noise disturbance measures were attenuated by low self-rated work capacity, suggesting that the consequences of noise and poor acoustics may not be limited to disturbance attributed to noise, but may have a wide negative impact on the perceived working environment.     

A functional perspective on the analysis of land use and land cover data in ecology

Assessments of large-scale changes in habitat are a priority for management and conservation. Traditional approaches use land use and land cover data (LULC) that focus mostly on “structural” properties of landscapes, rather than “functional” properties related to specific ecological processes. Here, we contend that designing functional analyses of LULC can provide important and complementary information to traditional, structural analyses. We substantiate this perspective with an example of functional changes in habitat due to industrial anthropogenic footprints in Alberta’s boreal forest, where there has been little overall forest loss (~ 6% structural change), but high levels of functional change (up to 93% functional change) for species’ habitat, biodiversity, and wildfire ignition. We discuss the methods needed to achieve functional LULC analyses, when they are most appropriate to add to structural assessments, and conclude by providing recommendations for analyses of LULC in a future of increasingly high-resolution, dynamic remote sensing data.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01434-5) contains supplementary material, which is available to authorized users.