Effect and mechanism of action of methomyl and cypermethrin insecticides on kynurenine metabolizing enzymes of mouse liver

Abstract

The effect of methomyl and cypermethrin insecticides on the B₆‐dependent kynurenine hydrolase(KH) and kynurenine aminotransferase (KATE) was studied. These insecticides induced pronounced inhibition on the (KH) and (KATE) enzymes after single dose treatment. Repeated doses of methomyl induced inhibition on the (KH) and (KATE) activities, whereas repeated treatment with cypermethrin had no effect on the activities of these enzymes. In vitro methomyl inhibited (KH) and (KATE) enzymes at 10 M up to 10^‐3 M, through a competitive mechanism. Methomyl and cypermethrin are capable of causing alterations in the kynurenine metabolizing enzymes of mouse liver.     

A method for scaling biological response of soil microcosms

An extensive series of laboratory experiments was conducted in soil microcosms to study the respiratory response of microorganisms to toxicant amendments within different types of soils. Our analysis of test results demonstrates that coupled biological and environmental factors within soil can be scaled (i.e., commensurably and analogously grouped) by means of two rate constants, one characterizing the diffusion of CO₂ in the soil matrix and another the biological production of CO₂. The two rate constants were used to classify the impact of metal compounds on diverse soil types and to predict the loss or gain of total respiratory CO₂ of amended soils relative to intact soils. This method exemplifies a more general approach, potentially useful for scaling complex physical and biological interactions in environmental assessments.     

Anaerobic digestion of organic fraction of municipal solid waste combining two pretreatment modalities, high temperature microwave and hydrogen peroxide

In order to enhance anaerobic digestion (AD) of the organic fraction of municipal solid waste (OFMSW), pretreatment combining two modalities, microwave (MW) heating in presence or absence of hydrogen peroxide (H₂O₂) were investigated. The main pretreatment variables affecting the characteristics of the OFMSW were temperature (T) via MW irradiation and supplemental water additions of 20% and 30% (SWA20 and SW30). Subsequently, the focus of this study was to evaluate mesophilic batch AD performance in terms of biogas production, as well as changes in the characteristics of the OFMSW post digestion. A high MW induced temperature range (115-175 °C) was applied, using sealed vessels and a bench scale MW unit equipped with temperature and pressure controls. Biochemical methane potential (BMP) tests were conducted on the whole OFMSW as well as the liquid fractions. The whole OFMSW pretreated at 115 °C and 145 °C showed 4-7% improvement in biogas production over untreated OFMSW (control). When pretreated at 175 °C, biogas production decreased due to formation of refractory compounds, inhibiting the digestion. For the liquid fraction of OFMSW, the effect of pretreatment on the cumulative biogas production (CBP) was more pronounced for SWA20 at 145 °C, with a 26% increase in biogas production after 8 days of digestion, compared to the control. When considering the increased substrate availability in the liquid fraction after MW pretreatment, a 78% improvement in biogas production vs. the control was achieved. Combining MW and H₂O₂ modalities did not have a positive impact on OFMSW stabilization and enhanced biogas production. In general, all samples pretreated with H₂O₂ displayed a long lag phase and the CBP was usually lower than MW irradiated only samples. First order rate constant was calculated.     

Upgraded modified forms of bituminous coal for the removal of safranin-T dye from aqueous solution

Natural bituminous coal was used as a precursor in the synthesis of different modified products. The modification of coal was performed by treating it with nitric acid (N-coal), coating its surface by zinc oxide nanoparticles (Z-coal), and converting it into porous graphite (PG). The effect of modification processes on the structures, morphologies, and optical properties was followed by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectrum (FT-IR), and UV/VIS spectrophotometer analysis. The surface of N-coal grains becomes smoother than the surface of raw coal grains due to the removal of the associated impurities and the formation of nitrogen function groups. For Z-coal, the whole surface of coal grains appears to be completely covered by agglomerated ZnO nanoparticles of massive density and irregular shapes. The average crystallite size of the formed ZnO is ~22.2 nm and density of dislocations is 2.029 × 10^?3 dislocation/nm². Also, the removal of safranin-T dye by natural bituminous coal and its modified forms was investigated as a function of contact time, adsorbent mass, initial dye concentration, and pH value. At pH 8, the PG showed higher efficiency (96%) than Z-coal (93.5%), N-coal (74.5%), and natural coal (62%) after 2 h for 0.1 g on 100 mg/L dye. The obtained results are well fitted by pseudo-second-order kinetic than by intraparticle diffusion and Elovich kinetic models for the adsorption by N-coal, Z-coal, and PG, whereas the adsorption by raw coal is well fitted with both pseudo-second-order and Elovich kinetic models. The Langmuir isotherm model fits well the equilibrium adsorption isotherm of safranin by raw coal and its modified forms. The values of maximum adsorption capacity were calculated for raw coal, N-coal, Z-coal, and PG to be 21.3, 27.4, 32.46, and 33.67 mg/g, respectively. A monolayer model with one energy and a monolayer model with two energies as advanced equilibrium models were investigated for more physical interpretation of the adsorption process. The calculated parameters (number of adsorbed molecules per site and number of receptor sites per unit mass) reflected the role of modification processes in the adsorption behavior of safranin.

Open image in new window

Graphical abstract High volatile bituminous coal and its modified forms have been used for the removal of Safranin-T dye from aqueous solution.

     

Microbial degradation op tripluralin by aspergillus carneus,fusarium oxysporum and trichoderma viride ∗

Abstract

³H‐Trifluralin was synthesized by condensation of ³H‐4‐chloro‐3,5‐dinitro‐α, α, α‐trifluorotoluene with di‐n‐propylamine.

After incubation of trifluralin with Aspergillus carneus, Fusarium oxysporum and Trichoderma viride for 10 days, a small percentage (less than 10%) of unchanged herbicide was recovered in the extractable fraction. This indicates a fairly rapid degradation of the herbicide by the fungal species. Other than trifluralin, the culture medium contained at least five labelled products: 2, 6‐dinitro‐N‐n‐propyl‐α, α, α‐tri‐fluoro‐p‐toluidine; 2, 6‐dinitro‐α, α, α‐trifluoro‐p‐toluidine; 2‐amino‐6‐nitro‐α, α,‐trifluoro‐p‐toluidine, 2, 6‐dinitro‐4‐trifluoromethyl phenol and a major polar product which constituted more than 50% of the total extractable transformation products. A pathway, which similates that of aerobic degradation of the herbicide in soil, is suggested for the microbiological degradation of trifluralin.     

Risk posed by chlorinated organic compounds in Abu Qir Bay,East Alexandria,Egypt

Introduction  

In Egypt, the picture of threats to humans and the environment from the exposure to organic pollutants is still incomplete. Thus the objectives of this study were to assess the occurrence and distribution of polychlorinated biphenyls (PCBs), organochlorine pesticides, and chlorpyrifos in sediments and mussels of Abu Qir Bay and their risks for environment and human health.     

Biosurfactant electrospun nanofibers exhibit minimal side effects on the structure and function of the liver tissue in male rat model

Environmental Science and Pollution Research - Oil spills can result in significant damage to marine estuaries, rivers, lakes, wetlands, and shorelines. Electrospun nanofibers containing...     

Metal pollution records in core sediments of some Red Sea coastal areas, Kingdom of Saudi Arabia

In the last three decades, the industrial and human activities in the coastal area of Saudi Arabia have increased dramatically and resulted in the continuous invasion of different types of pollutants including heavy metals. Seven sediment cores were collected from three major industrialized areas; Jeddah, Rabigh and Yanbu, along the coast of Saudi Arabia to determine the spatial and temporal distribution of metals and to assess the magnitude of pollution and their potential biological effects. Sediments were analyzed for texture, calcium carbonate contents, organic matter and metals (Al, Fe, Mn, Cd, Cr, Cu, Ni, Pb and Zn). Some metals like, Cr, Mn, Ni and Zn, were enriched in the upper 15 cm of core samples (recent deposition of sediments). Cadmium concentrations showed high fluctuations with depth and reverse pattern to that for Al, Fe and Mn which indicated land based sources of this element to the studied areas. Elevated concentrations of lead were recorded in the bottom layers of cores in Jeddah that indicated the most dramatic increase in usage of gasoline in early 1970s. The calculated contamination factors (CF's) were found in the following sequences: Cd > Pb > Ni > Cu > Zn > Cr > Mn for all studied areas. Results of Pollution Load Index (PLI) revealed that Jeddah is the most polluted area, followed by Rabigh while Yanbu is the least contaminated area. Except for Ni, the concentrations of most metals in the majority of sediment samples were believed to be safe for living organisms. As no data were available on the concentration of metals in core sediments in the coastal area of Saudi Arabia, the results of this study would serve as a baseline against which future anthropogenic effects can be assessed.