Performance of oil palm kernel shell gasification using a medium-scale downdraft gasifier

This article focused on the performance of oil palm kernel shell (PKS) gasification using a medium-scale downdraft gasifier with a feedstock capacity of 500 kg at a temperature range of 399–700°C and at a feed rate of 177 kg/h. This article is important for evaluating the reliability of PKS gasification for commercial power generation activities from biomass. The process performance was evaluated based on the syngas calorific value (CV), syngas flow rate, and its cold gas efficiency (CGE). The syngas flow rates and CVs were measured using a gas flow meter and a gas analyzer in real time. The data obtained were then analyzed to evaluate the performance of the process. The results showed that the CGE of the process was moderately high (51%) at 681°C, with a high syngas CV (4.45–4.89 MJ/Nm³) which was ideal for gas engine applications. The PKS gasification performance increased when the reactor temperature increased. Projections were made for the CGE and the syngas CV for the PKS gasification with increased reactor temperatures and it was found that these values could be increased up to 80% and 5.2 MJ/Nm^3, respectively at a reactor temperature of 900°C. In addition, the estimated power that could be generated was about 600 kW_e at a maximum operation of 500 kg/h of feed rate. Based on the analysis, a medium-scale PKS gasification is observed to be a promising process for power generation from biomass due to the favorable performance of the process.     

Succinate-bonded pullulan: An efficient and reusable super-sorbent for cadmium-uptake from spiked high-hardness groundwater

Chemically modified pullulan was evaluated for its sorption efficiency and selectivity to remove cadmium(Cd) from spiked high-hardness groundwater(GW). Pullulan esterified with succinic anhydride using dimethylaminopyridine showed a fairly high degree of substitution value as confirmed by1 H NMR spectroscopy. Pullulan succinate(Pull-Suc) was converted into the sodium salt(Pull-Suc-Na). The effect of contact time(5–200 min) and p H(2–8) on Cd-uptake by the sorbent(Pull-Suc-Na) was investigated. The sorbent showed more than 90% Cd-removal in first 15 min from distilled water(DW) and GW solution,respectively. Comparison of Pull-Suc-Na with other polysaccharidal sorbents suggested its high efficiency(DW 476.2 mg/g and GW 454.5 mg/g) and selectivity for the removal of Cd by an ion exchange mechanism, which is further supported by the negative Gibbs free energy values calculated from Langmuir isotherms. A Langmuir isotherm kinetic model provided the best fit for the sorption of Cd using Pull-Suc-Na. The sorbent showed a negligible decrease in Cd-uptake over three regeneration cycles. The thermal stability testing of the sorbents indicated that Pull-Suc-Na(sorbent) is more stable than Pull-Suc.     

Health risk assessment and oxidative stress in workers exposed to welding fumes

The aim of this study was designed to determine the influence of welding fumes on oxidative stress in humans and the role of metals. A questionnaire was designed to collect information regarding personal characteristics, including age, weight, height, and medical history; life style such as smoking status and exercise habits; and occupational history such as working history, working environment, employment duration, and use of protective equipment. Body mass index (BMI) in kg/m² was then calculated for each participant. Blood samples were also drawn to determine malondialdehyde (MDA) levels and various metals in plasma. Significantly higher plasma MDA (4.08 µg/L) was observed as compared to controls (1.61 µg/L). Blood metal analysis also showed elevated level of metals in welders for cadmium, chromium, lead,and nickel. Data indicated that workers occupationally exposed to welding fumes for prolong periods possessed higher metal levels associated with increased oxidative stress as evidenced by elevated MDA levels.     

Sludge granulation and e ciency of phase separator in UASB reactor treating combined industrial e uent

Sludge granulation and the effect of gas-liquid-solid separator （GLSS） design on the efficiency of upflow anaerobic sludge blanket （UASB） and upflow anaerobic sludge filter （UASF） reactors, operating at HRTs ranging from 3 to 12 h was investigated. VSS/TS ratio gradually increased in both the reactors with increasing sludge age （from 0.5 to more than 0.7 for UASB reactor and 0.012 to 0.043 for UASF reactor）. X-Ray diffraction analysis of the UASF sludge showed the presence of expanding clays revealing its additional absorption capability. Fuoraphyllite and albite precipitation related to excellular polymers of the microbial shell structure, showed the extended growth of microorganisms during sludge granulation. A gradual decrease （82%-69%） in COD removal with decreasing HRT was apparent in UASF reactor. In case of UASB reactor, this decrease was marginal because addition of GLSS device significantly improved （14%-20%） the overall efficiency of the UASB reactor. GLSS enhanced the efficiency of the UASB reactor by increasing the settleability of suspended particles and accelerating the coagulation of colloidal particles due to the velocity gradient.     

Pesticides exposure in Pakistan: a review

This is the first systematic review of studies done since 1960, and to give an integrated picture of pesticides exposure to humans, animals, plants, waters, soils/sediments, atmosphere etc. in Pakistan. Authors have extracted data from different departments, published literature in research journals and National reports. Although the wide-spread usage of pesticides in Pakistan has controlled the pests, but like other countries, it has started causing environmental problems in the area. In some areas of Punjab and Sindh groundwater has been found contaminated and is constantly being under the process of contamination due to pesticide use. There is considerable evidence that farmers have overused and misused pesticides especially in cotton-growing areas. It is evident from the biological monitoring studies that farmers are at higher risk for acute and chronic health effects associated with pesticides due to occupational exposure. Furthermore, the intensive use of pesticides (higher sprays more than the recommended dose) in cotton areas involves a special risk for the field workers, pickers, and of an unacceptable residue concentration in cottonseed oil and cakes. The authors have also discussed the merits and demerits of different studies. The review will set the future course of action of different studies on pesticide exposure in Pakistan. Data limitations are still the major obstacle towards establishing clear environmental trends in Pakistan. The authors suggest that a reliable monitoring, assessment and reporting procedures shall be implemented in accordance with appropriate environmental policies, laws and regulations in order to minimize the pesticides exposure.     

Effect of CO on NO oxidation over platinum based catalysts for hybrid fast SCR process

The oxidation characteristics of NO over Pt/TiO2 (anatase, rutile) catalysts have been determined in a fixed bed reactor as a function of O2, CO and SO2 concentrations in the presence of 8% water. The conversion of NO to NO2 increases with increasing O2 concentration up to 12% and it levels off. This saturation effect is more pronounced over rutile-Pt/TiO2 (r-Pt/TiO2) than that of anatase-Pt/TiO2 (a-Pt/TiO2). The presence of CO increases NO oxidation significantly and this enhanced effect is more pronounced on a-Pt/TiO2 than that on r-Pt/TiO2 with increasing CO concentration at lower temperatures. The same effect is also observed on the catalysts with different Pt and tungsten oxide (WO3) loadings. With increasing Pt and WO3 loadings on TiO2 support (Pt-WO3/TiO2), formation of NO2 is high even at lower temperatures. The presence of SO2 significantly suppresses the oxidation of NO over both r-Pt/TiO2 and a-Pt/TiO2 catalysts but it is less pronounced due to low stability of sulfate on a-Pt/TiO2.     

A simple method for simultaneous determination of some organic liquids in in-process materials and effluents produced in the manufacture of amoxicillin and ampicillin

A simple GC method for simultaneous determination of pivaloylchloride, methylacetoacetate, ethylacetoacetate and 2-ethylhexanoic acid in the presence of each other has been developed using glass column packed with 1% Silicone OV-17 on Gaschrom Q 100-120 mesh with temperature programming. Various performance parameters including precision, linearity and limit of detection have been evaluated. The method was found to be suitable for the analysis of these chemicals in in-process materials and effluents associated with the manufacture of amoxicillin and ampicillin. The run time was less than 15 min. The method has been successfully applied to determine the level of these hazardous organic liquids in real time samples.     

Monitoring the drastic growth of ship breaking yards in Sitakunda: a threat to the coastal environment of Bangladesh

The vast coastal and marine resources that occur along the southern edge of Bangladesh make it one of the most productive areas of the world. However, due to growing anthropogenic impacts, this area is under considerable environmental pressure from both physical and chemical stress factors. Ship breaking, or the dismantling and demolition of out-of-service ocean-going vessels, has become increasingly common in many coastal areas. To investigate the extent of ship breaking activities in Bangladesh along the Sitakunda coast, various spatial and non-spatial data were obtained, including remote sensing imagery, statistical records and published reports. Impacts to coastal and marine life were documented. Available data show that ship breaking activities cause significant physical disturbance and release toxic materials into the environment, resulting in adverse effects to numerous marine taxonomic groups such as fish, mammals, birds, reptiles, plants, phytoplankton, zooplankton and benthic invertebrates. Landsat imagery illustrates that the negatively impacted coastal area has grown 308.7 % from 367 ha in 1989 to 1,133 ha in 2010. Physicochemical and biological properties of coastal soil and water indicate substantially elevated pollution that poses a risk of local, regional and even global contamination through sea water and atmospheric transport. While damage to the coastal environment of Bangladesh is a recognized hazard that must be addressed, the economic benefits of ship breaking through job creation and fulfilling the domestic demand for recycled steel must be considered. Rather than an outright ban on beach breaking of ships, the enterprise must be recognized as a true and influential industry that should be held responsible for developing an economically viable and environmentally proactive growth strategy. Evolution of the industry toward a sustainable system can be aided through reasonable and enforceable legislative and judicial action that takes a balanced approach, but does not diminish the value of coastal conservation.