Municipal wastewater viral pollution in Saudi Arabia: effect of hot climate on COVID-19 disease spreading

Environmental Science and Pollution Research - The viral RNA of SARS-Coronavirus-2 is known to be contaminating municipal wastewater. We aimed to assess if COVID-19 disease is spreading through...     

Distribution and Statistical Analysis of Leachable and Total Heavy Metals in the Sediments of the Suez Gulf

The concentrations of nine heavy metals (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pd and Zn) in the labile and total fractions of muddy and sandy sediment samples collected from twelve sites in Suez Gulf during April 1999 were studied to evaluate the pollution status of the Suez Gulf. The enrichment factors (EF) for each element were calculated. There are extremely high concentrations of Cd, Ni, Pb and slightly concentration of Cr and Cu in both muddy and sandy sediments. The concentration of Zn was moderately high and can be considered as seriously contaminate Metal pollution index (MPI) shows high values ranged between 46 to 156 and 40 to 232 for both sandy and muddy sediments, respectively. Concentrations of heavy metals were normalized against iron for total fraction in both of sandy and muddy sediments. Principal component analysis (PCA) was studied on the data matrix obtained and represented three-factor model explaining 92.22% for labile and 88.82% for total fractions of muddy sediment. The main source of contamination is the offshore oil fields and industrial wastes. This is largely a result of ineffective and inefficient operation equipment, illegal discharge of dirty ballast water from tankers and lack of supervision and prosecution of offenders.     

The impact of coastal flooding on conservation areas: A study of the Clyde Estuary, Scotland

This study examines the impact of flooding on land of high conservation value located along part of the southern shoreline of the River Clyde Estuary in western Scotland. This paper hypothesizes that, over the next 50 years, the frequency and extent of coastal flooding will increase due to the gradual effect of global warming and the consequent rise in sea-level and increase in storminess. It is argued that because of the great cost of constructing new flood defence systems it will not be possible to protect all land areas to an equal extent from flooding. A means of ranking different land use will be necessary so that society can make a rational judgement concerning which sections of coastline will be worth protecting. This study provides a methodology that combines an objective ranking of conservation areas using non-economic indicators with a GIS model of flood potential, and permits accurate forecasts of flood losses to conservation areas of different ecological value. The conservation case study used in this paper proposes the use of an ecological weighting value based on five ecological variables each of 10 categories. Tables and maps identify the sites that have been highlighted as consisting of the most ‘valuable’ conservation sites. The methodology makes extensive use of geographical information systems (GIS) to model the predicted areas of flooding and to calculate conservation weighting values of the land areas.     

Evaluating greywater reuse potential for sustainable water resources management in Oman

This study aims to evaluate the potential of greywater availability in Muscat Governorate in the Sultanate of Oman, to establish a methodology for greywater quantity estimation, to test greywater quality in order to assess reuse potential, and to examine public acceptance for reuse.Total fresh water consumption and greywater generation from different household sources were measured by water meters in five selected households during summer and winter. Additionally, a survey was designed and conducted in five administrative areas of Muscat Governorate, with the objective of testing a methodology for estimating greywater generation potential in these areas. Collected data were compared with that used by the Ministry of Housing, Electricity and Water, Sultanate of Oman. The survey covered a total of 169 houses and 1,365 people. Greywater samples were collected and analyzed from showers, laundries, kitchens and sinks in some of these households to determine their water quality parameters. Statistical analysis results indicated that there is no significant variance in the total fresh water consumption between data used by the ministry and those measured and estimated during this study, highlighting the applicability of the tested method. The study concluded that the average per capita greywater generation rate is 151 Lpcd. Greywater production ranged from 80 to 83% of the total fresh water consumption and most of the greywater is generated from showers. Further, 55 to 57% of the greywater generated in a typical Omani household originated from the shower, 28 to 33% originated from the kitchen, 6 to 9% originated from laundry, and 5 to 7% originated from sink, which constitutes approximately 81% of the total fresh water consumption. The physical, chemical, and biological analyses of the grab samples revealed that greywater contains significant levels of suspended solids, inorganic constituents, total organic carbon, chemical and biochemical oxygen demands, total Coliforms and Escherichia Coliform bacteria. The public acceptance survey illustrated that approximately 76% of the respondents accepted the reuse of greywater for gardening, 53% for car washing and 66% for toilet flushing.     

Assessment of groundwater vulnerability in the coastal region of Oman using DRASTIC index method in GIS environment

A study was carried out to develop a vulnerability map for Barka region in the North Batina of Oman using DRASTIC vulnerability index method in GIS environment. DRASTIC layers were created using data from published reports and the seven DRASTIC layers were processed by the ArcGIS geographic information system. Finally, DRASTIC maps were created for 1995 and 2004 to understand the long-term changes in the vulnerability index. DRASTIC vulnerability maps were evaluated using groundwater quality data such as chemical and biological parameters. DRASTIC vulnerability maps of 1995 and 2004 indicate that the northern part of Barka is more vulnerable to pollution than southern part and the central part of Barka also shows high relative vulnerability which is mostly related to the high conductivity values. Moreover, the changes in water level due to high abstraction rate of groundwater reflect in the vulnerability maps and low vulnerability area is increased in the southern part during 2004 compared to 1995. Moreover, regional distribution maps of nitrate, chloride and total and fecal coliforms are well correlated with DRASTIC vulnerability maps. In contrast to this, even though DRASTIC method predicted the central part of the study region is highly vulnerable, both chemical and biological parameters show lower concentrations in this region compared to coastal belt, which is mainly due to agricultural and urban development. In Barka, urban development and agricultural activities are very high in coastal region compared to southern and central part of the study area. Hence, this study concluded that DRASTIC method is also applicable in coastal region having ubiquitous contamination sources.     

Phytoremediation of Nickel-Contaminated Soils by Brassica Species

Two Brassica species Brassica juncea and Brassica carinata of the Indian mustard, were grown in an artificially Ni-contaminated soil to study the tolerance and Ni accumulation. Chelating agent, EDTA was applied at the rosette stage for enhancing the metal uptake. Nickel concentration over almost double that in control was observed in both the species with Ni contamination along with EDTA application. Specie B. juncea appeared to be slightly more tolerant and higher accumulator of Ni. In agreement with the earlier reports, the translocation of the pollutant metal to the shoot from the root seemed to be restricted in both of Brassica species at higher rate of Ni application plus EDTA. The results of the present study indicated that B. juncea has the potential to be hyperaccumulator of Ni.     

A simple spectrophotometric method for the determination of cobalt in industrial, environmental, biological and soil samples using bis(salicylaldehyde)orthophenylenediamine

Bis(salicylaldehyde)orthophenylenediamine (BSOPD) has been proposed as new analytical reagent for the direct non-extractive spectrophotometric determination of cobalt. It reacts with cobalt in slightly acidic (0.0002-0.001 M H(2)SO(4)) 50% 1,4-dioxanic medium to form a red-orange chelate with a molar ratio 1:1. The reaction is instantaneous and the maximum absorbance was obtained at 458 nm and remains constant for over 24h. The average molar absorption coefficient and Sandell's sensitivity were found to be 1.109 x 10(4)l mol(-1)cm(-1) and 20 ng cm(-2) of Co(II), respectively. Linear calibration graph was obtained for 0.1-15 mg l(-1) of Co(II) with a correlation coefficient value of 0.995 for Co-BSOPD complex. Large excess of 44 cations, anions and complexing agents do not interfere in the determination. The method was successfully used in the determination of cobalt(II) from synthetic mixture and certified reference materials for the purpose of validating the method and the results of analyses were found to be excellent agreement with those of actual values. This developed method was also used for determination of cobalt in some environmental waters (potable and polluted), biological (blood and urine) and soil samples and solution containing both cobalt(II) and cobalt(III). The results of the proposed method for biological samples were comparable with AAS and were found to be in good agreement. The method has high precision and accuracy (s=+/-0.01 for 0.5 mg l(-1)).     

Influence of humic fractions on retention of isoproturon residues in two Moroccan soils

The influence of different fractions of soil organic matter on the retention of the herbicide isoproturon (IPU) has been evaluated. Water and methanol extractable residues of (14)C labeled isoproturon have been determined in two Moroccan soils by beta -counting-liquid chromatography. The quantification of bound residues in soil and in different fractions of soil humic substances has been performed using pyrolysis/scintillation-detected gas-chromatography. Microbial mineralization of the herbicide and soil organic matter has been also monitored. Retention of isoproturon residues after 30-days incubation ranged from 22% to 32% (non-extractable fraction). The radioactivity extracted in an aqueous environment was from 20% to 33% of the amount used for the treatment; meanwhile, methanol was able to extract another 48%. Both soils showed quantities of bound residues into the humin fraction higher than humic and fulvic acids. The total amount of residues retained into the organic matter of the soils was about 65 % of non-extractable fraction, and this percentage did not change with incubation time; on the contrary, the sorption rate of the retention reaction is mostly influenced by the clay fraction and organic content of the soil. Only a little part of the herbicide was mineralized during the experimental time.     

Determination of heavy metals (Cd, Cr, Cu, Fe, Ni, Pb, Zn) by ICP-OES and their speciation in Algerian Mediterranean Sea sediments after a five-stage sequential extraction procedure

Surface sediment samples (n = 18) were collected from the Algerian Mediterranean coasts and analyzed for seven metals using inductively coupled plasma-optical emission spectrometry in order to asses the distribution and bioavailability of metals and to study the anthropogenic factors affecting their concentrations. Sediment samples were size-fractionated into three sizes: 1,080–500 (coarse), 500–250 (medium), and <250 mm (fine). Bulk sediments were subjected to both sequential extraction and total digestion to evaluate the reliability of the sequential extraction procedure (SEP), while the fractions have been only sequentially extracted for metals speciation. The metals were sequentially extracted into five phases namely exchangeable (P1), carbonates (P2), Fe–Mn oxides (P3), organic (P4) and residual (P5). Metal recoveries in sequential extractions were ±20% of the independently measured total metal concentrations; the high recovery rates indicate the good reliability of the SEP used in this study. Correlation coefficients indicated that the grain size has an effect on the distribution of metals in the investigated samples. The order of metal levels in the fractions was medium > fine > coarse for all the metals. The average total extractable metal concentrations for Cd, Cr, Cu, Fe, Ni, Pb, and Zn were 1.1, 8.8, 4.7, 1,291.3, 13.9, 5.7 and 20.4 μg/g, respectively. The northeastern shelf had the lowest metal levels while the highest were in northwestern part mainly due to the significant tourism activities in the northwestern part. Comparison of our results to Earth’s crust values and to previous studies points out that our samples were relatively unpolluted with respect to the heavy metals investigated; most of the metals are not from anthropogenic sources. Enrichment factors as the criteria for examining the impact of the anthropogenic sources of heavy metals were calculated, and it was observed that the investigated samples were not contaminated with Cr, Cu, and Fe, moderately contaminated with Ni, Pb, and Cd, and contaminated with Cd in some sites. The P5 phase had the highest percents of Cr, Cu, Fe, Ni, and Zn. Cadmium and lead were predominant in the P4 phase, while Cu, Fe and Zn were distributed in the order P5 > P3 > P4 > P2 > P1. The following order of bioavailability was found with the heavy metals Pb > Cr > Cd > Ni > Zn > Cu > Fe.