Current status and research on E-waste issues in Asia

Rapid economic growth in Asia and the increasing transboundary movement of secondary resources will increasingly require both 3R endeavors (reduce, reuse, recycle) in each country and appropriate control of international material cycles. Recently, managing electrical and electronic waste (E-waste) has become an important target for domestic and international material cycles from the viewpoints of environmental preservation and resource utilization efficiency. To understand the current status of E-waste issues in the context of international material cycles and to discuss the future tasks related to achieving 3R in the region, we organized the National Institute for Environmental Studies (NIES) E-waste Workshop in December 2004. This article reviews past studies on E-waste and briefly describes the topics presented and discussions held at the workshop. The topics at the workshop included E-waste generation, recycling systems, international trade, and environmental impacts. In addition, we discussed various issues such as terminology, current environmental concerns, and possible solutions. Transboundary shipments of E-waste should be conducted taking into consideration the concept of sustainable development. The direction of future research and possible collaborations are also discussed.     

Physical containment of municipal solid waste incineration bottom ash by accelerated carbonation

Accelerated carbonation of municipal solid waste incineration residues is effective for immobilizing heavy metals. In this study, the contribution of the physical containment by carbonation to immobilization of some heavy metals was examined by some leaching tests and SEM–EDS analysis of untreated, carbonated, and milled bottom ash after carbonation that was crushed with a mortar to a mean particle size of approximately 1 μm. The surface of carbonated bottom ash particles on SEM images seemed mostly coated, while there were uneven micro-spaces on the surface of the untreated bottom ash. Results of Japan Leaching Test No. 18 (JLT18) for soil pollution showed that milling carbonated bottom ash increased the pH and EC. The leaching concentration of each element tended to be high for untreated samples, and was decreased by carbonation. However, after the milling of carbonated samples, the leaching concentration became high again. The immobilization effect of each element was weakened by milling. The ratio of physical containment effect to immobilization effects by accelerated carbonation was calculated using the results of JLT18. The ratio for each element was as follows: Pb: 13.9–69.0 %, Cu: 12.0–49.1 %, Cr: 24.1–99.7 %, Zn: 20.0–33.3 %, and Ca: 28.9–63.4 %.     

A GIS-based evaluation of the effect of decontamination on effective doses due to long-term external exposures in Fukushima

Despite the enormous cost of radiation decontamination, there has been almost no quantitative discussion on how much it would reduce the long-term external radiation exposure in the Evacuation Zone and Planned Evacuation Zone (restricted zone) in Fukushima. The aim of this study is to assess the effectiveness of decontamination and return options and to identify important parameters for estimating the long-term cumulated effective dose (CED) during 15, 30 and 70 year period using data on land-use, population and decontamination in the restricted zone (about 1100 km²) in Fukushima.     

Simultaneous removal of dissolved organic matter and bromide from drinking water source by anion exchange resins for controlling disinfection by-products

Anion exchange resins （AERs） with different properties were evaluated for their ability to remove dissolved organic matter （DOM） and bromide, and to reduce disinfection by-product （DBP） formation potentials of water collected from a eutrophic surface water source in Japan. DOM and bromide were simultaneously removed by all selected AERs in batch adsorption experiments. A polyacrylic magnetic ion exchange resin （MIEX） showed faster dissolved organic carbon （DOC） removal than other AERs because it had the smallest resin bead size. Aromatic DOM fractions with molecular weight larger than 1600 Da and fluorescent organic fractions of fulvic acid- and humic acid-like compounds were efficiently removed by all AERs. Polystyrene AERs were more effective in bromide removal than polyacrylic AERs. This result implied that the properties of AERs, i.e. material and resin size, influenced not only DOM removal but also bromide removal efficiency, MIEX showed significant chlorinated DBP removal because it had the highest DOC removal within 30 rain, whereas polystyrene AERs efficiently removed brominated DBPs, especially brominated trihalomethane species. The results suggested that, depending on source water DOM and bromide concentration, selecting a suitable AER is a key factor in effective control of chlorinated and brominated DBPs in drinking water.     

Dispersal and persistence of genetically modified oilseed rape around Japanese harbors

Background, aim, and scope

The possibility of gene transfer from genetically modified oilseed rape (OSR) to its cultivated or wild relatives is of concern since its commercial cultivation, because of its potential weediness and impact on the environment. Introgression of modified genes can affect conservation of agricultural crops, because there are many cultivars and wild Brassicaceae that may cross with genetically modified OSR (Brassica napus) in Japan. Japan imports more than 2 million tons of OSR a year from Canada and other countries. Since volunteers of GM OSR were found around harbors in 2004, a lot of feral GM OSR was discovered in Japan. To consider the way how to keep domestic Brassicaceae from GM contamination, we surveyed and analyzed the dispersal and persistence of GM OSR around Japanese harbors. We present the cause and abundance of GM OSR in Japan by this paper.

Materials and methods

Survey of the feral OSR was performed several times a year at different seasons when domestic OSR either grows or does not around port areas. Detection of herbicide tolerance in feral B. napus was done by test papers that cross react with the modified gene product. Two kinds of herbicide tolerance (glyphosate and glufosinate) were tested.

Results

The feral B. napus were discovered around all 13 harbors that import rapeseeds from foreign countries. Genetically modified, herbicide-tolerant OSR were frequently found in the surveyed populations. Two kinds of herbicide-tolerant OSR (glyphosate- and glufosinate-tolerant) were discovered in a natural condition 40 km from port to an oil factory where 60,000 tons of OSR seed are processed a year. The cause of voluntary growth of OSR is seed spillage during transportation by trucks from harbors to oil factories and other processing facilities. Some of the feral OSR growing along the roadsides of transport paths exhibited perennial growth spilling their seeds around the places. Alteration of the generation of feral GM OSR was discovered for the first time in Japan as a result of this study. We studied the yearly change of feral OSR abundances focusing on Yokkaichi port over the 4 years since 2004. The rate of GM OSR increases year to year, and reaches nearly 90% in 2008.

Discussion

The possibility and consequences of gene transfer from the genetically modified OSR to domestic species (B. rapa and B. juncea) were discussed in relation to impact on domestic agriculture and on environments. Evolutional meaning of the gene transfer was also discussed with respect to the gene construct of GM OSR. This study shows the importance of another pathway of modified gene transfer to non-GM relative species by seed transportation in addition to pollen transfer from commercial cultivation of genetically modified OSR.

Conclusions and recommendations

We identified unintended dispersal and persistence of GM OSR around Japanese harbors that import OSR from Canada and other countries. Both glyphosate- and glufosinate-tolerant feral B. napus were discovered. The cause of volunteer OSR is spillage of the seeds during transportation by truck to oil factory. The feral GM OSR sometimes showed perennial growth in Japanese phonological conditions which are not observed for domestic Brassicaceae. In addition, we confirmed an alteration of generations by feral GM OSR in Japan. The possibility of cross pollination and GM gene introgression to domestic varieties can occur in these environments. To improve the situation, each responsible organization, company, administration, or government should establish measures how to stop the dispersal and persistence of GM OSR in nature. Also, the GM plant developers are responsible for revising this situation.     

Identification of particles containing chromium and lead in road dust and soakaway sediment by electron probe microanalyser

Individual particles containing Cr and/or Pb and other major components were identified in road dust from a heavily used road (hereinafter 'heavy traffic road dust'), road dust from a residential area and soakaway sediment by electron probe microanalyser to locate their sources and carrier particles. Individual particles containing high levels of Cr and/or Pb (>or=0.2%) were identified using wavelength dispersive spectrometry (WDS) map analysis. Chromium, Pb and other major elements were then determined by means of a combination of WDS and energy-dispersive spectrometry in all identified particles, 50 particles containing neither Cr nor Pb from each type of road dust and soakaway sediment, and yellow road line markings. WDS map analysis revealed that many particles containing both Cr and Pb were present among the identified particles in heavy traffic road dust, whereas they were minor components in road dust from the residential area and soakaway sediment. The plots of X-ray intensities of Cr vs. Pb were linear for the identified particles containing both Cr and Pb in heavy traffic road dust, and the line closely fitted the plots for the three yellow road line marking samples. Individual particles were then classified using cluster analysis of element components. The results revealed that the adsorption of source materials or released metals onto soil minerals occurred in road dust and soakaway sediment, that the yellow road line markings were sources of Cr and Pb in heavy traffic road dust, and that materials containing Fe as a major component, such as stainless steel, were additional sources of Cr in both road dust and soakaway sediment.     

Material flows of end-of-life home appliances in Japan

In Japan, the Law for the Recycling of Specified Kinds of Home Appliances came into effect in April 2001. This law aims to introduce appropriate waste treatment and promote the efficient use of resources so that we can achieve a sound material-cycle society. The law introduces a new framework for recycling that places obligations principally on the manufacturers and retailers of home appliances. Material flow analysis of this new framework is essential for evaluation of the system and for finding any problems that may exist. We therefore analyzed the material flows in facilities that recycle electrical home appliances. The mass balances in the recycling facilities were appropriately estimated. Then the potential destinations were surveyed and analyzed, even though the legal framework does not include flows after the recycling facilities. The potential destination after the facilities varies and depends on both the economy and the related regulations. Currently, considerable amounts of recovered materials are exported and recycled. However, the sustainability of these trades is unknown. Therefore, we should keep a close eye on the situation and make sure that our recycling system is adaptable to meet any future changes.     

A new protease assay system using gelatin thin film for monitoring indoor air quality

Airborne particulates have a major influence on the quality of indoor environments, which in turn affects human health. Both allergens and proteases are major etiological factors in allergic disease. Thus, the monitoring of environmental protease particulates is very important for the management of allergic disease. Protease-monitoring systems have been introduced in industry, but have not been applied to domestic settings, probably because of the high cost and many complex steps involved in these systems. In this study, we developed an indoor protease-monitoring system which can easily detect protease particulates without need for pre-treatment of dust samples or complex measuring instruments such as fluorescent plate reader. As a protease substrate, gelatin thin film (GTF) was adopted to evaluate small amounts of house dust particulates. The principle of this assay is based on the hydrolysis of GTF. Protease molecules spread from a particulate to GTF can hydrolyze the gelatin, thereby producing a spot on the GTF. This hydrolyzed spot visualized by staining was much larger than the particulate size, making visible to naked eye. The GTF method facilitated the observation of a subtle increase in protease particulates fallen on the GTF after the turnover of a used bed-quilt. The newly developed GTF method seems to be a suitable tool for protease monitoring at home.     

Evaluation of surface runoff and road dust as sources of nitrogen using nitrate isotopic composition

Stable nitrogen and oxygen isotope ratios of nitrate (δ¹⁵N-NO₃ and δ¹⁸O-NO₃) have recently been used to identify nitrogen sources in water environments. However, there have been no investigations designed to determine nitrate isotopes in non-point sources in urban areas for evaluating the impact of surface deposits on nitrogen in surface runoff. In this study, we collected rainwater, surface runoff and surface deposits (road dust, roof dust and soil) to evaluate the nitrogen sources in surface runoff using nitrate isotopes. There were no large differences in δ¹⁵N-NO₃ among rainwater (−0.3‰ to 1.5‰), surface runoff (−2.7‰ to 0.4‰), leachates from road dust (−5.8‰ to 6.2‰) and soil (−11.5‰ to 0.6‰). In contrast, the δ¹⁸O-NO₃ in surface runoff (28.5-47.9‰) was lower than that in rainwater (62.7-78.6‰), and higher than that in leachates from road dust (6.1-27.6‰) and soil (−1.1‰ to 6.6‰). δ¹⁸O-NO₃ is a useful indicator for evaluating the NO₃-N sources in surface runoff. Using this indicator, NO₃-N from road dust was estimated to account for more than half of the NO₃-N in surface runoff. This is consistent with a result based on a comparison of their loads per unit surface between rainwater and surface runoff, which also showed that most of the nitrogen in surface runoff was derived from surface deposits.     

Heavy metals removal from aqueous solution using carbonaceous K_2S-impregnated adsorbent

A novel carbonaceous adsorbent for heavy metal removal was prepared from raw coal by one-step simple sulfur impregnation using K_2S. Raw coal was mixed with K_2S powder and then heated at 800℃ for 30 min in nitrogen to produce K_2S char. The sulfur content and form in K_2S char were determined, and the ability of K_2S char to adsorb Zn~(2+), Cd~(2+) and Pb~(2+) was examined. The K_2S impregnation was effective at impregnating sulfur into coal, especially in the form of elemental, thiophenic and sulfatic sulfur. The sulfur content of K_2S char was higher than those of raw coal and pyrolysis char. The Zn~(2+) removal in 2.4 mmol/L of Zn~(2+) solution by K_2S char was higher than raw coal with the removal rate of 100%. K_2S char adsorbed Pb~(2+) and Cd~(2+) in 24 mmol/L of Pb~(2+) and Cd~(2+) solution with the removal rate of 97 % and 35 %, respectively. The elution extents of adsorbed Pb~(2+) and Cd~(2+) were zero in distilled water and 27% in 0.1 mol/L HCl solution. These results indicated that an effective adsorbent for heavy metal ions was prepared from coal using K_2S sulfur impregnation, and that the adsorbed metals were strongly retained in K_2S char.