Heavy metal removal from aqueous solution using carbonaceous K2S-impregnated adsorbent

A novel carbonaceous adsorbent for heavy metal removal was prepared from raw coal by one-step simple sulfur impregnation using K2S. Raw coal was mixed with K2S powder and then heated at 800°C for 30 min in nitrogen to produce K2S char. The sulfur content and form in K2S char were determined, and the ability of K2S char to adsorb Zn2+, Cd2+ and Pb2+ was examined. The K2S impregnation was e ective at impregnating sulfur into coal, especially in the form of elemental, thiophenic and sulfatic sulfur. The sulfur content of K2S char was higher than those of raw coal and pyrolysis char. The Zn2+ removal in 2.4 mmol/L of Zn2+ solution by K2S char was higher than raw coal with the removal rate of 100%. K2S char adsorbed Pb2+ and Cd2+ in 24 mmol/L of Pb2+ and Cd2+ solution with the removal rate of 97% and 35%, respectively. The elution extents of adsorbed Pb2+ and Cd2+ were zero in distilled water and 27% in 0.1 mol/L HCl solution. These results indicated that an e ective adsorbent for heavy metal ions was prepared from coal using K2S sulfur impregnation, and that the adsorbed metals were strongly retained in K2S char.     

Molding Method, Thermal and Mechanical Properties of Jute/PLA Injection Molding

Natural composites have been important materials system due to preservation of earth environments. Natural fibers such as jute, hemp, bagasse and so on are very good candidate of natural composites as reinforcements. On the other hand regarding matrix parts thermosetting polymer and thermoplastic polymer deriver form petrochemical products are not environmental friendly material, even if thermoplastic polymer can be recycled. In order to create fully environmental friendly material (FEFM) biodegradable polymer which can be deriver from natural resources is needed. Therefore poly(lactic acid) (PLA) polymer is very good material for the FEFM. In this paper jute fiber filled PLA resin (jute/PLA) composites was fabricated by injection moldings and mechanical properties were measured. It is believable that industries will have much attention to FEFM, so that injection molding was adopted to fabricate the composites. Long fiber pellet fabricated by pultrusion technique was adopted to prepare jute/PLA pellet. Because it is able to fabricate composite pellets with relative long length fibers for injection molding process, where, jute yarns were continuously pulled and coated with PLA resin. Here two kinds of PLA materials were used including the one with mold releasing agent and the other without it. After pass through a heated die whereby PLA resin impregnates into the jute yarns and sufficient cooling, the impregnated jute yarns were cut into pellets. Then jute/PLA pellets were fed into injection machine to make dumbbell shape specimens. In current study, the effects of temperature of PLA melting temperature i.e. impregnation temperature and the kinds of PLA were focused to get optimum molding condition. The volume fractions of jute fiber in pellet were measured by several measuring method including image analyzing, density measurement and dissolution methods. Additionally, thermal and mechanical properties were investigated. It is found that 250° is much suitable for jute/PLA long fiber pultrusion process because of its less heat degradation of jute, better impregnation, acceptable mechanical property and higher production efficiency. Additionally the jute fibers seem much effective to increase deflection temperature under load, tensile modulus and Izod strength.     

Biogeochemical model (BGC-ES) and its basin-level application for evaluating ecosystem services under forest management practices

It is important for humans to live in harmony with ecosystems. Evaluation of ecosystem services (ES) may be helpful in achieving this objective. In Japan, forest ecosystems need to be re-evaluated to prevent their degradation due to lack of forest management.In order to evaluate the effects of forest management on forest ES, we developed a process-based biogeochemical model to estimate water, carbon, and nitrogen cycles in forest ecosystems (BGC-ES). This model consists of four submodels: biomass, water cycle, carbon-nitrogen (CN) cycles, and forest management. The biomass submodel can calculate growth of forest biomass under forest managements.Several parameters of the model were calibrated using data from observations of evapotranspiration flux and quality of stream flow in forests. The model results were compared with observations of runoff water from a dam catchment site and with carbon flux observations.Our model was coupled with a basin-level GIS database of forests. Evaluations under various forest management scenarios were carried out for forests in a basin contained in the Ise Bay basin (Chubu region, Japan), where plantations (artificial forests) seemed to have degraded from poor forest management.Comparing our simulation results with those of forests without management in the basin, we found that the amounts of absorbed carbon and runoff were larger in managed forests. In addition, the volume of harvested timber was larger and its quality (diameter) was better in managed forests. Changes of ES within the various scenarios were estimated for their economic value and were compared with the cost of forest management.     

Comparison of the changes in temperatures among rural, urban and metropolitan areas around the Inland Sea in Japan

We investigated the changes in temperatures in Takamatsu, Tadotsu and Osaka areas in Japan. Data of temperatures in Takamatsu (urban area: 1942-2009), Tadotsu (rural area: 1893-2009) and Osaka (metropolitan area: 1883-2009) areas around the Inland Sea in Japan was obtained from Japan Meteorological Agency. The changes in temperatures in three areas in Japan were analyzed and compared. By using data from 1942 to 2009, various parameters of temperatures were significantly correlated with years. The changes in mean temperature in August and in a year in Takamatsu area for 50 years were highest (August: 1.6°C, Year: 1.8°C) among three areas. In addition, correlation coefficient rate between years and the number of days over the level of 34°C in August in Takamatsu area was highest (r = 0.567, p < 0.0001). Parameters of temperatures were gradually increased with years in all three areas. The heat island effect in Takamatsu area was similar to Osaka area in Japan.     

The sorption of heavy metal species by sediments in soakaways receiving urban road runoff

Infiltration facilities are designed for both the retention of non-point pollutants and the replenishment of groundwater in urban areas. In this study, sorption tests were conducted to evaluate the speciation of heavy metals and their behaviour in infiltration facilities receiving urban road runoff containing high DOC concentrations and stable heavy metal organic complexes. Road dust and three soakaway sediments were collected from heavy traffic areas and a residential area with an infiltration-type sewerage system in Tokyo, Japan. Sequential multiple batch tests were conducted by adding prepared road dust leachate (artificial road runoff) or deionised water to soakaway sediment to obtain soakaway sediment leachate (artificial percolating water from soakaway sediment), which mimicked the sorption by sediments in soakaways receiving urban road runoff. Heavy metal speciation was assessed by means of a combination of anion-exchange resin measurements and MINTEQA2 model calculations, and further validated by chelating resin measurements. In road dust leachates and soakaway sediment leachates, Cu predominantly existed as organic complexes and carbonates, whereas most Mn, Zn and Cd were found to exist in the form of free ions and carbonate complexes. Stable organic complexes of Cu in road dust leachates were strongly adsorbed by soakaway sediments despite the limited adsorption of DOC. On the other hand, desorption of free Mn, Zn and Cd ions from the sediment receiving road dust leachates was observed, indicating that heavy metals such as Mn, Zn and Cd may ultimately reach groundwater as free ions.     

Simultaneous removal of dissolved organic matter and bromide from drinking water source by anion exchange resins for controlling disinfection by-products

Anion exchange resins （AERs） with different properties were evaluated for their ability to remove dissolved organic matter （DOM） and bromide, and to reduce disinfection by-product （DBP） formation potentials of water collected from a eutrophic surface water source in Japan. DOM and bromide were simultaneously removed by all selected AERs in batch adsorption experiments. A polyacrylic magnetic ion exchange resin （MIEX） showed faster dissolved organic carbon （DOC） removal than other AERs because it had the smallest resin bead size. Aromatic DOM fractions with molecular weight larger than 1600 Da and fluorescent organic fractions of fulvic acid- and humic acid-like compounds were efficiently removed by all AERs. Polystyrene AERs were more effective in bromide removal than polyacrylic AERs. This result implied that the properties of AERs, i.e. material and resin size, influenced not only DOM removal but also bromide removal efficiency, MIEX showed significant chlorinated DBP removal because it had the highest DOC removal within 30 rain, whereas polystyrene AERs efficiently removed brominated DBPs, especially brominated trihalomethane species. The results suggested that, depending on source water DOM and bromide concentration, selecting a suitable AER is a key factor in effective control of chlorinated and brominated DBPs in drinking water.     

Dispersal and persistence of genetically modified oilseed rape around Japanese harbors

Background, aim, and scope

The possibility of gene transfer from genetically modified oilseed rape (OSR) to its cultivated or wild relatives is of concern since its commercial cultivation, because of its potential weediness and impact on the environment. Introgression of modified genes can affect conservation of agricultural crops, because there are many cultivars and wild Brassicaceae that may cross with genetically modified OSR (Brassica napus) in Japan. Japan imports more than 2 million tons of OSR a year from Canada and other countries. Since volunteers of GM OSR were found around harbors in 2004, a lot of feral GM OSR was discovered in Japan. To consider the way how to keep domestic Brassicaceae from GM contamination, we surveyed and analyzed the dispersal and persistence of GM OSR around Japanese harbors. We present the cause and abundance of GM OSR in Japan by this paper.

Materials and methods

Survey of the feral OSR was performed several times a year at different seasons when domestic OSR either grows or does not around port areas. Detection of herbicide tolerance in feral B. napus was done by test papers that cross react with the modified gene product. Two kinds of herbicide tolerance (glyphosate and glufosinate) were tested.

Results

The feral B. napus were discovered around all 13 harbors that import rapeseeds from foreign countries. Genetically modified, herbicide-tolerant OSR were frequently found in the surveyed populations. Two kinds of herbicide-tolerant OSR (glyphosate- and glufosinate-tolerant) were discovered in a natural condition 40 km from port to an oil factory where 60,000 tons of OSR seed are processed a year. The cause of voluntary growth of OSR is seed spillage during transportation by trucks from harbors to oil factories and other processing facilities. Some of the feral OSR growing along the roadsides of transport paths exhibited perennial growth spilling their seeds around the places. Alteration of the generation of feral GM OSR was discovered for the first time in Japan as a result of this study. We studied the yearly change of feral OSR abundances focusing on Yokkaichi port over the 4 years since 2004. The rate of GM OSR increases year to year, and reaches nearly 90% in 2008.

Discussion

The possibility and consequences of gene transfer from the genetically modified OSR to domestic species (B. rapa and B. juncea) were discussed in relation to impact on domestic agriculture and on environments. Evolutional meaning of the gene transfer was also discussed with respect to the gene construct of GM OSR. This study shows the importance of another pathway of modified gene transfer to non-GM relative species by seed transportation in addition to pollen transfer from commercial cultivation of genetically modified OSR.

Conclusions and recommendations

We identified unintended dispersal and persistence of GM OSR around Japanese harbors that import OSR from Canada and other countries. Both glyphosate- and glufosinate-tolerant feral B. napus were discovered. The cause of volunteer OSR is spillage of the seeds during transportation by truck to oil factory. The feral GM OSR sometimes showed perennial growth in Japanese phonological conditions which are not observed for domestic Brassicaceae. In addition, we confirmed an alteration of generations by feral GM OSR in Japan. The possibility of cross pollination and GM gene introgression to domestic varieties can occur in these environments. To improve the situation, each responsible organization, company, administration, or government should establish measures how to stop the dispersal and persistence of GM OSR in nature. Also, the GM plant developers are responsible for revising this situation.     

Identification of particles containing chromium and lead in road dust and soakaway sediment by electron probe microanalyser

Individual particles containing Cr and/or Pb and other major components were identified in road dust from a heavily used road (hereinafter 'heavy traffic road dust'), road dust from a residential area and soakaway sediment by electron probe microanalyser to locate their sources and carrier particles. Individual particles containing high levels of Cr and/or Pb (>or=0.2%) were identified using wavelength dispersive spectrometry (WDS) map analysis. Chromium, Pb and other major elements were then determined by means of a combination of WDS and energy-dispersive spectrometry in all identified particles, 50 particles containing neither Cr nor Pb from each type of road dust and soakaway sediment, and yellow road line markings. WDS map analysis revealed that many particles containing both Cr and Pb were present among the identified particles in heavy traffic road dust, whereas they were minor components in road dust from the residential area and soakaway sediment. The plots of X-ray intensities of Cr vs. Pb were linear for the identified particles containing both Cr and Pb in heavy traffic road dust, and the line closely fitted the plots for the three yellow road line marking samples. Individual particles were then classified using cluster analysis of element components. The results revealed that the adsorption of source materials or released metals onto soil minerals occurred in road dust and soakaway sediment, that the yellow road line markings were sources of Cr and Pb in heavy traffic road dust, and that materials containing Fe as a major component, such as stainless steel, were additional sources of Cr in both road dust and soakaway sediment.     

Determination of nonylphenol ethoxylates and octylphenol ethoxylates in environmental samples using 13C-labeled surrogate compounds

Alkylphenol polyethoxylates (APEOs) have been widely used as nonionic surfactants in a variety of industrial and commercial products. Typical compounds are nonylphenol polyethoxylates (NPEOs) and octylphenol polyethoxylates (OPEOs), which serve as precursors to nonylphenol (NP) and octylphenol (OP), respectively. NP and 4-t-OP are known to have endocrine disrupting effects on fish (medaka, Oryzias latipes), so it is important to know the concentrations of APEOs in the environment. Because the analytical characteristics of these compounds depend on the length of the ethoxy chain, it is necessary to use appropriate compounds as internal standards or surrogates. We synthesized two 13C-labeled surrogate compounds and used these compounds as internal standards to determine NPEOs and OPEOs by high-performance liquid chromatography (LC)-mass spectrometry. Method detection limits were 0.015 microg/L for NP (2)EO to 0.037 microg/L for NP(12)EO, and 0.011 microg/L for OP(3,6)EO to 0.024 microg/L for OP (4)EO. NPEO concentrations in water from a sewage treatment plant were less than 0.05-0.52 microg/L for final effluent and 1.2-15 microg/L for influent. OPEO concentrations were less than 0.05-0.15 microg/L for the final effluent and less than 0.05-1.1 microg/L for influent.     

Material flows of end-of-life home appliances in Japan

In Japan, the Law for the Recycling of Specified Kinds of Home Appliances came into effect in April 2001. This law aims to introduce appropriate waste treatment and promote the efficient use of resources so that we can achieve a sound material-cycle society. The law introduces a new framework for recycling that places obligations principally on the manufacturers and retailers of home appliances. Material flow analysis of this new framework is essential for evaluation of the system and for finding any problems that may exist. We therefore analyzed the material flows in facilities that recycle electrical home appliances. The mass balances in the recycling facilities were appropriately estimated. Then the potential destinations were surveyed and analyzed, even though the legal framework does not include flows after the recycling facilities. The potential destination after the facilities varies and depends on both the economy and the related regulations. Currently, considerable amounts of recovered materials are exported and recycled. However, the sustainability of these trades is unknown. Therefore, we should keep a close eye on the situation and make sure that our recycling system is adaptable to meet any future changes.