Study on the toxicity of binary equitoxic mixtures of metals using the luminescent bacteria Vibrio fischeri as a biological target

Results from two mathematical approaches to predict the toxicity of all the possible binary equitoxic mixtures of Co, Cd, Cu, Zn and Pb were compared to the observed toxicity of these mixtures to Vibrio fischeri bacteria. Combined effect of the metals was found to be antagonistic for Co-Cd, Cd-Zn, Cd-Pb and Cu-Pb, synergistic for Co-Cu and Zn-Pb and merely additive in other cases, revealing a complex pattern of possible interactions. Besides, Cd appears much less toxic to the bacterial model than to animal cells. The synergistic effect of the Co-Cu combination and the strong lowering of Pb toxicity in the presence of Cd deserve much attention when establishing environmental safety regulations.     

Subcritical water oxidation of propham by H2O2 using response surface methodology (RSM)

This study was conducted to investigate the degradation of propham, which is a compound that pollutes water and seriously threatens human health, by subcritical water oxidation and using H₂O₂ as an oxidising agent. The maximum total organic carbon removal rate of propham was obtained as 73.65% at 40 min of treatment time and 60 mM of H₂O₂ concentration and 373 K of temperature. In addition, response surface method based on the Box-Behnken design was applied to design the degradation experiments of propham for determination of the combined effects of process variables, namely temperature, concentration of oxidising agent and treatment time. The proposed quadratic model of propham degradation, which was examined with the analysis of variance, was used for navigating the design space. The R² and adjusted R² values of the model were determined as 0.9921 and 0.9819 respectively. It was shown that propham was effectively degraded, thus could be removed from the water by using an environmentally friendly method.     

The modeling and analysis of transesterification reaction conditions in the selection of optimal biodiesel yield and viscosity

Among alternative fuels, biodiesel has been emphasized as a substantial candidate for diesel engines because of many advantages. However, the main shortcomings preventing more widespread use of biodiesel are high production cost and viscosity. In order to simultaneously overcome both of these shortcomings, the reaction conditions for the transesterification of waste cooking oil (WCO) were optimized using Taguchi and the full factorial design approaches. The analyses of signal to noise ratio and variance were also performed to identify the dominance of reaction conditions on viscosity and biodiesel yield. As a result, the optimal reaction conditions giving the lowest kinematic viscosity (3.991 cSt) and the highest biodiesel yield (98.19%) were determined to be as follows: sodium methoxide amount of 1.00 wt%, reaction time of 60 min, reaction temperature of 55 °C, and methanol to oil molar ratio of 6:1. The catalyst amount and methanol to oil molar ratio were found to be the most significant conditions influencing on the viscosity (10.36% and 78.87% contributions) and the yield (58.48% and 20.17% contributions), respectively. Finally, all physicochemical properties of final waste cooking oil biodiesel (WCOB) produced under optimal reaction conditions were found to meet the EN 14214.     

Land cover change detection in the Turkish coastal zone based on 28-year (1990–2018) Corine data

Environmental Monitoring and Assessment - The present study aims to estimate the effects of PM2.5 on the health and economy of Karaj city from 2012 to 2019. In this study, mortality attributed to...     

Patterns of metals and arsenic poisoning in Vibrio fischeri bacteria

The Microtox bioassay was used to establish dose-response curves for some toxic elements in aqueous solutions, namely, Zn(II), Pb(II), Cu(II), Hg(II), Ag(I), Co(II), Cd(II), Cr(VI), As(V) and As(III). Experiments were carried out at either pH 6.0 or pH 7.0 to indicate that pH may influence the measured toxicity of some elements due to pH-related changes of their chemical speciation. EC20 values, which represent a measurable threshold of toxicity, were determined for each element and were found to rank as Pb(II)>Ag(I)>Hg(II) approximately Cu(II)>Zn(II)>As(V)>Cd(II) approximately Co(II)>As(III)>Cr(VI). These values were compared to the limit concentrations allowed in industrial wastewater according to the official regulations in Catalonia (Spain). It appears that the Microtox test is sensitive enough for detecting some of the tested elements with respect to official regulations of Catalonia (Spain) dealing with pollution control, with the exception of cadmium, mercury, arsenate, arsenite and chromate.     

Application of response surface methodology for the optimization of biodiesel production from yellow mustard (Sinapis alba L.) seed oil

In the present study, response surface methodology (RSM) involving central composite design (CCD) was applied to optimize the reaction parameters of biodiesel production from yellow mustard (Sinapis alba L.) seed oil during the single-step transesterification process. A total of 30 experiments were designed and performed to determine under the effects of variables on the biodiesel yield such as methanol to oil molar ratio (2:1–10:1), catalyst concentration (0.2–1.0 wt.% NaOH), reaction temperature (50–70°C), and reaction time (30–90 min). The second order polynomial model was used to predict the biodiesel yield and coefficient of determination (R²) was found to be at 0.9818. The optimum biodiesel yield was calculated as 96.695% from the model with the following reaction conditions: 7.41:1 of methanol to oil molar ratio, 0.63 wt. % NaOH of catalyst concentration, 61.84°C of reaction temperature, and 62.12 min of reaction time. It is seen that the regression model results were in agreement with the experimental data. The results showed that RSM is a suitable statistical technique for optimizing the reaction parameters in the transesterification process in order to maximize the biodiesel yield.     

Cadmium accumulation by green algae Cladophora glomerata (L.) Kutz. (Chlorophyta) in presence of Nile tilapia Oreochromis niloticus (L.)

Accumulation of metals by aquatic organisms is mostly affected by other biological components in environments. In this study, cadmium (Cd) accumulation in green algae, Cladophora glomerata (L.) Kutz., exposed to 0.1 and 1.0 mg L^?1 of Cd for 15 and 30 days was examined in laboratory conditions in the presence of Nile tilapia Oreochromis niloticus (L.). The green algae C. glomerata accumulated Cd concentrations as 690 ± 70 and 3430 ± 470 mg kg^?1 on day 15, and 1130 ± 180 and 6830 ± 1540 mg kg^?1 on day 30. There were significant increases (p < 0.05) in metal accumulation by green algae as the exposure time and metal concentration increased. The results also indicated that the presence of Nile tilapia in the medium led to a significant Cd accumulation in the green algae compared to control (p < 0.05).     

Indoor and outdoor radon measurements at lung cancer patients’ homes in the dwellings of Rize Province in Turkey

In this study, indoor and outdoor radon (²²²Rn) surveys were carried out in the summer and winter seasons in homes of one hundred lung cancer patients in the year 2013–2014. The aim was to investigate the relationship between radon and cancer patients. Lung cancer patients completed a questionnaire concerning their living environment, various physical parameters and living habits. Pearson correlation and t tests revealed no meaningful results between radon concentrations, on one hand, and environmental and personal living habits, on the other hand. Consequently, the BEIR VI model was adapted and ²²²Rn exposure was estimated to be responsible for about 12% of the lung cancer incidences in the winter season and around 5% in the summer season in the Rize Province. However, due to the limited number of data and numerous parameters that could lead to lung cancer, the estimations done with the model should be taken very lightly. The annual effective doses due to inhalation of indoor and outdoor ²²²Rn were estimated to be, respectively, 1.43 and 0.94 mSv y^?1. The indoor and outdoor annual effective doses were, respectively, close and below the world annual effective dose (1.3 mSv y^?1). At the district level, the indoor annual effective dose equivalent in the ?yidere district was 4.52 mSv y^?1, which was 3.5 times greater than the world average. The number of patients in the majority of the houses in this district was more than one.     

Evaluation of the relationship of picoplankton and viruses to environmental variables in a lagoon system (Çakalburnu Lagoon,Turkey)

Lagoons are defined as wetlands separated from the sea coasts on which they are located and sit between continental and marine aquatic ecosystems. Çakalburnu Lagoon is a coastal wetland on the southern side of the Bay of ?zmir. Microorganisms, which are quite sensitive to changes occurring in environmental factors, are commonly used to determine the impact of environmental effects on the functioning of the ecosystem. In this study, variations in the abundance and biomass of picoplankton (Synechococcus spp. and bacteria) and the abundance of viruses, which identify the ecological productivity of the food chain, were seasonally examined by epifluorescence microscopy. Moreover, the microbial abundance and biomass relation over time between the physical and chemical parameters was evaluated. According to our results, the maximum abundance of Synechococcus spp. and viruses was 6.7?×?10⁴ cell/ml and 9.9?×?10⁸?cell/ml in the summer, respectively. Otherwise, the highest level of bacteria was measured at 3.6?×?10⁷ cell/ml in the spring. Based on the principal component analysis and Pearson correlation analysis results, we concluded that total suspended solids, Chl-a, particulate organic carbon and particulate organic nitrogen were the major parameters influencing the observed variability of the lagoon system. Overall, to protect and improve the ecological and microbiological quality of aquatic systems such as lagoons, the necessary monitoring and measurement studies should be conducted in these sensitive areas.     

Impacts of repeated timber skidding on the chemical properties of topsoil, herbaceous cover and forest floor in an eastern beech (Fagus orientalis Lipsky) stand

In this study, long-term timber skidding effects on herbaceous understory forest floor and soil were investigated on a skid road in a stand of the eastern beech (Fagus orientalis Lipsky). For this purpose, herbaceous understory forest floor and soil samples were collected from the skid road and from an undisturbed area used as a control plot. The mass (kg ha(-1)) of herbaceous and forest floor samples was determined, and soil characteristics were examined at two depths (0-5 cm and 5-10 cm). We quantified sand, silt and clay content, as well as bulk density compaction, pH, and organic carbon content in soil samples. The quantities of N, K, P, Na, Ca, Mg, Fe, Mn, Zn and Cu were determined in all herbaceous cover forest floor and soil samples. The quantities of Na, Fe, Zn, Cu and Mn in herbaceous understory samples from the skid road were considerably higher than those in the undisturbed area, while the quantity of Mg was considerably lower. These differences could have been caused by decreased herbaceous cover in addition to variations in the properties of the forest floor and soil after skidding. A lower amount of forest floor on the skid road was the result of skidding and harvesting activities. Mg and Zn contents in forest floor samples were found to be considerably lower for the skid road than for the undisturbed area. No significant differences were found in soil chemical properties (quantities of N, P, K, Na, Ca, Mg, Fe, Zn, Cu and Mn) at the 0-5 cm soil depth. Important differences exist between soil quantities of Mg at a 5-10 cm depth on the skid road and in undisturbed areas. Both 0-5 cm and 5-10 cm soil depths, the average penetrometer resistance values for the skid road was higher than for the undisturbed area. This result shows that the compaction caused by skidding is maintained to depth of 10 cm. Skid road soil showed higher bulk density values than undisturbed areas because of compaction.