Heavy metal mobility and potential availability in animal manure: using a sequential extraction procedure

In this study, dairy cow manure, goat manure, and chicken manure were collected from three farms and analyzed to find out the concentration of Cd, Co, Cr, Cu, Mn, Ni, Pb, and Zn. The concentration and potential of mobility and availability of heavy metals were studied in the animal manure samples. BCR Sequential extraction procedure was used to determine the binding forms of the metals. In this study, pseudo total concentrations of Mn and Zn were found out to be predominant in all the types of animal manure samples. According to the results, it was traced that Cr, Cu, and Ni were observed to be at the second highest level while Cd, Co, and Pb were seen at the lowest level in all the manure samples. When extractable amounts of heavy metals are taken into consideration, it is seen that the amount of the mobile fractions of heavy metals except for Cr and Ni are higher in comparison with that of immobile fraction in all the animal manure samples. It was also viewed that Mn, Cd, and Zn are more available in dairy cow manure and chicken manure whereas Cd, Co, and Mn are more available in goat manure.     

Mineral contents and proximate composition of Pistacia vera kernels

The mineral contents of Pistacia vera kernels were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The minimum and maximum values of K, P, Ca, Mg, and S elements ranged from 6,333 to 8,064 mg/kg, 3,630 to 5,228 mg/kg, 1,614 to 3,226 mg/kg, 1,716 to 2,402 mg/kg, and 1,417 to 1,825 mg/kg, respectively. In addition, the mean values of Fe, Zn, Cu, Mn, B, Mo, Cr and Ni elements were determined as 42.48, 20.52, 12.81, 7.48, 11.31, 0.106, 0.511 and 1.67 mg/kg, respectively. Ash levels of kernels were found between 2.28 % (Urfa) and 2.79 % (Halebi). In addition, crude oil and protein contents were determined between 48.8 % (Halebi) to 55.3 % (Siirt) and 23.33 % (Uzun) to 27.16 % (Halebi), respectively.     

1,3,5-triazine-triethylenetetramine polymer: an efficient adsorbent for removal of Cr(VI) ions from aqueous solution

The synthesis of 1,3,5-triazine-triethylenetetramine (TATETA), its characterization by infrared spectroscopy and elemental analysis, and its application for removal of Cr(VI) ions from aqueous solution is reported. The effects of pH, contact time, initial concentration of Cr(VI), sorbent dose, and temperature on adsorption were investigated and optimized by batch adsorption experiments. Adsorption was highest at acidic conditions with an equilibration time of 25 min. The adsorption followed a Langmuir model, with an adsorption capacity of 303 mg g^?1, was second order in its kinetics, and exothermic and thus spontaneous.     

The comparison of heavy metal accumulation ratios of some fish species in Enne Dame Lake (Kütahya/Turkey)

The metal accumulation levels for muscle, skin, gill, liver and intestine tissues of some Cyprinidae species (Carassius carassius, Condrostoma nasus, Leuciscus cephalus and Alburnus alburnus) in Enne Dame Lake (Kütahya/Turkey), which is mostly fed by hot spring waters, were investigated. Analyses were performed for copper (Cu), zinc (Zn), manganese (Mn), iron (Fe), cobalt (Co), magnesium (Mg), nickel (Ni), chrome (Cr) and boron (B) using inductively coupled plasma-optic emission spectroscopy (ICP-OES), and cadmium (Cd) using atomic absorption spectrophotometer (AAS) utilizing microwave digestion techniques. The concentrations of the heavy metals found in the fish varied in the follow ing ranges: Cu: < DL-7.04, Zn: 6.96-357.25, Mn: < DL-20.70, Ni: < DL-6.21, Fe: 9.62-2500.33, Cr: < DL-1.74, Co: < DL-0.54, Cd: 0.01-0.27 and Mg: 197.44-904.90 mg/kg wet weight. While B had the second highest concentration in the water of the lake, it was not encountered in any tissue of the investigated species. In all tissues and the species, While the bioaccumulation factors (BAFs) of Mn, Zn, Fe and Cu were remarkably high, the BAFs of Mg, Cr, Co, and B were also fairly low or none. Although the heavy metal accumulation levels for the muscle were generally lower than other tissues, there were some exceptions. Cd level in the muscle of C. carassius was higher than the permissible limit stated by Turkish legislation, FAO and WHO. The mean metal amounts for all the investigated tissues and species are statistically compared and discussed in this study.     

High boron removal by functionalized magnesium ferrite nanopowders

Hydroxyl-enriched materials are promising boron adsorbents. However, the use of these materials is hampered by issues of separation, recovery, and selectivity, notably due to the presence of interfering ions. Therefore, we synthesized here a cheap magnetic nanopowder, which was further functionalized with polyvinyl alcohol and glycidol to produce boron-selective adsorbents. We studied their selectivity and removal efficiency using batch and fixed-bed systems. Sorption was studied at both concentrated and trace amounts of boron. Results show that nanopowders have 5.3–6.5 nm pore sizes and 145–203 m²/g surface areas, using Brunauer–Emmett–Teller analysis. Polyvinyl alcohol-functionalized particles removed 93 % of boron at 5 mg/L at pH 7 in 30 min, whereas only 68 % of boron was removed by glycidol-functionalized particles. However, at higher boron concentration, of 50 mg/L, glycidol-functionalized particles showed higher adsorption affinity of 68.9 mg/g. We conclude that internal hydroxyl groups of polyvinyl alcohol-functionalized particles are less accessible at higher boron concentration. This is the first report on magnesium ferrites for boron recovery. The spent adsorbents were separated easily from the aqueous media by an external magnet and repeatedly used. Overall, our findings demonstrated that the hydroxyl-enriched magnetic nanopowders are a better alternative to the existing boron adsorbents regarding magnetic separation, reusability, and selectivity.     

Determination of Au(III) and Pd(II) ions by flame atomic absorption spectrometry in some environmental samples after solid phase extraction

A simple and sensitive solid phase extraction method was developed for simultaneous separation and preconcentration of gold and palladium ions with N-(4-methylphenyl)-2-{[(4-phenyl-5-pyridine-4-yl-4H-1,2,4-triazol-3-yl)thio]acetyl}hydrazine carbo thioamide complex on Amberlite XAD-1180 resin before their determination by flame atomic absorption spectrometry. Some analytical parameters such as HNO₃ concentration of the sample solution, amount of complexing agent, sample volume, eluent type and volume, effects of foreign ions and adsorption capacity of the resin were investigated for quantitative recovery of gold and palladium ions. The effects of some anions and cations were also examined. Under optimum conditions, the detection limits for gold and palladium ions were found to be 0.29 and 0.19 μg L^?1, respectively. The preconcentration factor for gold and palladium was 250. After being validated by standard addition and analysis of standard reference material, the procedure was successfully applied to the analysis of sea and stream water, anodic slime, gold ore, soil and electronic waste.     

Concentration Evolution of Gas Species within a Collapsing Bubble in a Liquid Medium

In this study numerical methods are used to investigate the relationship between chemical concentration of gas species within a cavitating bubble, equilibrium radius of the gas bubble and pressure variations in the ambient liquid. For this purpose, governing equations are developed to describe the dynamic equilibrium of a bubble in a flowing fluid and mass transfer between gas and liquid phases, where it was assumed that gases undergo isothermal compression, obey the ideal gas law, Henry law. It is further assumed that the concentration of each phase within the bubble is uniform. The resulting nonlinear equations are solved using implicit Trapezoidal method with Newton iteration. Four gas species are modeled under various initial and ambient pressure variation conditions. These conditions maybe considered to represent typical cavitation events. The numerical results obtained are presented in terms of dimensionless numbers. These results indicate that chemical damage maybe an important component of cavitation surface damage, since high concentration profiles may develop within a collapsing bubble. Proposed formulation and numerical solutions are simple and cost effective to implement. The results presented in this study maybe used to benchmark experimental investigations or other more complex solutions, which are outside the scope of this study.     

Unemployment effects of climate policy

This paper models the unemployment effects of restrictions on greenhouse gas emissions, embodying two of the most significant types of short-term economic imperfections that generate unemployment: sectoral rigidities in labor mobility and sectoral rigidities in wage adjustments. A labor policy is also analyzed that would reduce the direct negative economic effects of the emissions restrictions.The politics of limiting greenhouse gas emissions are often dominated by relatively short-term considerations. Yet the current economic modeling of emissions limitations does not embody economic features that are likely to be particularly important in the short term, in particular, the politically sensitive unemployment rate. Moreover, only a few of these studies also consider policies that would offset the negative direct economic effects of emissions restrictions. For plausible estimates of the parameters, the model shows that, with the labor market imperfections, if there were no offsetting policies, the reductions in GNP in the U.S. in the first 10 years after emissions restrictions were imposed would be as much as 4%. However, if there were two policies, instead of just one: a counteracting labor market policy, as well as the emissions restrictions, the negative direct economic effects could be completely eliminated.     

Impacts of climatic disasters in coastal Bangladesh: why does private adaptive capacity differ?

This paper quantitatively assesses the influences of various demographic and socio-economic factors, past adaptive behavioral factors, access to weather/climate information, and spatial/locational factors on coastal populations’ perceived adaptive capacity against major impacts of hydro-meteorological disasters on their livelihood. A total of 285 respondents from three coastal villages in Bangladesh were randomly interviewed between January and April 2009. Respondents rated their perceived adaptive capacity against 25 anticipated impacts of sea-level rise (SLR)-induced events on their livelihood. By employing the principal component analysis (PCA), perceived adaptive capacity was grouped into five major categories. Then, an adaptive capacity index for each of five major impacts, namely, “infrastructure damage and disrupted mobility,” “food and nutritional insecurity,” “low earning and higher cost of maintenance,” “loss of employment in offshore activities,” and “crisis of potable water and public health risk,” was prepared. How adaptive capacity against each of these major five categories of impacts differs due to the influence of various factors was assessed by employing the multivariate analysis of variance (MANOVA) technique. The MANOVAs show that age, sex, level of education, type of occupation, farmland holdings, past adaptive behavior against rainfall, salinity intrusion, freshwater crises, use of radio for weather information, and the distance of the homestead from the shoreline have varying levels of influence on respondents’ perceived adaptive capacity against each of the five major categories of impacts. Others factors have moderate to limited influences. The policy implication is that specific programs, rather than a generic one-size fits all program, must be initiated for enhancement of adaptive capacity against specific impacts.