Factors affecting polycyclic aromatic hydrocarbon biodegradation by Aspergillus flavus

This study investigated the ability of fungi isolated from highly contaminated soil to biodegrade polycyclic aromatic hydrocarbon (PAH) compounds, as well as the effect of several parameters on the biodegradation ability of these fungi. The isolated fungi were identified using ITS rDNA sequencing and tested using 2,6‐dichlorophinolendophenol to determine their preliminary ability to degrade crude oil. The top‐performing fungi, Aspergillus flavus and Aspergillus fumigatus, were selected to test their ability to biodegrade PAH compounds as single isolates. After 15 days of incubation, A. flavus degraded 82.7% of the total PAH compounds, with the complete degradation of six compounds, whereas A. fumigatus degraded 68.9% of the total PAHs, with four aromatic compounds completely degraded. We also tested whether different temperatures, pH, and nitrogen sources influenced the growth of A. flavus and the degradation rate. The degradation process was optimal at a temperature of 30°C, pH of 5.5, and with nitrogen in the form of yeast extract. Finally, the ability of the fungal candidate, A. flavus, to degrade PAH compounds under these optimum conditions was studied. The results showed that 95.87% of the total PAHs, including 11 aromatic compounds, were completely degraded after 15 days of incubation. This suggests that A. flavus is a potential microorganism for the degradation of PAH compounds in aqueous cultures.     

Characterization of the Khamaseen (spring) dust in Jordan

During the spring each year, the Eastern Mediterranean is affected by Khamaseen dust cyclones sourced from the North African Sahara. In order to characterize Khamaseen dust in Jordan, we collected dust from ten localities during the spring of 2006. The collected dust was analyzed for grain size, mineralogy, and chemical composition. The dust is predominantly aluminosilicates (clay minerals and feldspars), quartz and carbonates with minor amounts of phosphate. The particles are mostly subrounded to subangular and generally between 5 and 20 μm in size. The majority of the elements analyzed have a natural abundance and distribution. However, several elements such as As, Cd, Cr, Cu, Pb, Se and Zn have higher than natural abundances due to anthropogenic enrichment by various enrichment factors. The analyzed dust samples are chemically homogenous, indicating a similar provenance and good mixing by the Khamaseen winds. The rare earth elements patterns are similar to those of the upper continental crust composition and average shale. Total amount of dust deposited on Jordan during the spring of 2006 is around 0.3 million tons.     

Dry deposition and soil-air gas exchange of polychlorinated biphenyls (PCBs) in an industrial area

Ambient air and dry deposition, and soil samples were collected at the Aliaga industrial site in Izmir, Turkey. Atmospheric total (particle + gas) ∑₄₁-PCB concentrations were higher in summer (3370 ± 1617 pg m⁻³, average + SD) than in winter (1164 ± 618 pg m⁻³), probably due to increased volatilization with temperature. Average particulate ∑₄₁-PCBs dry deposition fluxes were 349 ± 183 and 469 ± 328 ng m⁻² day⁻¹ in summer and winter, respectively. Overall average particulate deposition velocity was 5.5 ± 3.5 cm s⁻¹. The spatial distribution of ∑₄₁-PCB soil concentrations (n = 48) showed that the iron-steel plants, ship dismantling facilities, refinery and petrochemicals complex are the major sources in the area. Calculated air-soil exchange fluxes indicated that the contaminated soil is a secondary source to the atmosphere for lighter PCBs and as a sink for heavier ones. Comparable magnitude of gas exchange and dry particle deposition fluxes indicated that both mechanisms are equally important for PCB movement between air and soil in Aliaga.     

Determination of total chromium by flame atomic absorption spectrometry after coprecipitation by cerium (IV) hydroxide

A method for the preconcentration of the total chromium based on coprecipitation with cerium (IV) hydroxide is proposed for determination of chromium by flame atomic absorption spectrometry. Different factors including carrier element amount, pH, sample volume and matrix ion effects for the precipitation were examined. The detection limit of the total chromium (k = 3, N = 15) was 0.18 μg l⁻¹. The presented method was applied for the determination of chromium in the wastewater samples from Kayseri and Nigde Organized Industrial Region-Turkey and in drinking water from our laboratory, Kayseri with satisfactory results (relative standard deviations below 8%, recoveries 95%). The analytical results obtained by the proposed method for certified copper sample was in good agreement with the certified value.     

Assessing the effects of land use changes on soil sensitivity to erosion in a highland ecosystem of semi-arid Turkey

There has been increasing concern in highlands of semiarid Turkey that conversion of these systems results in excessive soil erosion, ecosystem degradation, and loss of sustainable resources. An increasing rate of land use/cover changes especially in semiarid mountainous areas has resulted in important effects on physical and ecological processes, causing many regions to undergo accelerated environmental degradation in terms of soil erosion, mass movement and reservoir sedimentation. This paper, therefore, explores the impact of land use changes on land degradation in a linkage to the soil erodibility, RUSLE-K, in Cankiri–Indagi Mountain Pass, Turkey. The characterization of soil erodibility in this ecosystem is important from the standpoint of conserving fragile ecosystems and planning management practices. Five adjacent land uses (cropland, grassland, woodland, plantation, and recreational land) were selected for this research. Analysis of variance showed that soil properties and RUSLE-K statistically changed with land use changes and soils of the recreational land and cropland were more sensitive to water erosion than those of the woodland, grassland, and plantation. This was mainly due to the significant decreases in soil organic matter (SOM) and hydraulic conductivity (HC) in those lands. Additionally, soil samples randomly collected from the depths of 0–10 cm (D ₁) and 10–20 cm (D ₂) with irregular intervals in an area of 1,200 by 4,200 m sufficiently characterized not only the spatial distribution of soil organic matter (SOM), hydraulic conductivity (HC), clay (C), silt (Si), sand (S) and silt plus very fine sand (Si + VFS) but also the spatial distribution of RUSLE-K as an algebraically estimate of these parameters together with field assessment of soil structure to assess the dynamic relationships between soil properties and land use types. In this study, in order to perform the spatial analyses, the mean sampling intervals were 43, 50, 64, 78, 85 m for woodland, plantation, grassland, recreation, and cropland with the sample numbers of 56, 79, 72, 13, and 69, respectively, resulting in an average interval of 64 m for whole study area. Although nugget effect and nugget effect–sill ratio gave an idea about the sampling design adequacy, the better results are undoubtedly likely by both equi-probable spatial sampling and random sampling representative of all land uses.     

Comparative evaluation of some macro- and micro-element and heavy metal contents in commercial fruit juices

Micro- and macro-element contents of several commercial fruit juices purchased from marked were determined by inductively coupled plasma atomic emission spectroscopy. Among the minor elements determined, Zn, Cu, Mn, Mo, Co, Cd and Ni were found to be lover. Major mineral contents of fruit juices were established as Ca, K, Mg and P. The potassium contents of fruit juices were determined at the higher levels. K contents of fruit juices ranged between 475 mg/kg (B apricot) and 1478 mg/kg (B peach). In addition while Ca contents of fruit juices change between 19.3 mg/kg (E cherry) and 81.8 mg/kg (C orange), Mg contents ranged at the levels between 23.7 mg/kg (A apricot) and 65.4 mg/kg (D orange). Generally Ca and contents of peach, orange and apricot juices that belong to A and D companies were determined at the high levels.     

Trace metal contents in chewing gums and candies marketed in Turkey

Cu, Ni, Pb, Fe, Mn, Cr and Cd contents were determined in 17 different brands of chewing gum and candy samples available in local markets of Kayseri, Turkey. Concentration of selected trace metals were estimated using flame atomic absorption spectrometer after dry and wet digestion methods. Out of 17 brands of chewing gums and candies analysed, four were cocoa based, two were sugar based and other were of fruit based. Copper level ranged from 0.219 to 2.455 microg/g with an average of 1.390 microg/g. Nickel ranged from 0.120 to 2.588 microg/g with an average of 0.846 microg/g. Lead level ranged from 0.031 to 2.46 microg/g with an average of 0.746 microg/g. Iron level ranged from 3.963 to 9.863 microg/g with an average of 6.618 microg/g. Manganese level ranged from 1.872 to 5.067 microg/g with an average of 3.196 microg/g. Chromium ranged from 0.740 to 6.265 microg/g with an average of 2.473 microg/g and cadmium level ranged from 0.027 to 0.825 microg/g with an average of 0.296 microg/g. Cocoa based samples were found to have higher contents of the analysed metals than sugar and fruit based samples.     

Assessment of heavy metals in two commercial fish species of four Turkish seas

There is an increasingly need to assess the contaminant levels in fish as indicators of the health and well-being of both the fish and their consumers, including humans. Fish samples were collected through the coastal waters of Turkey and the contents of cadmium, copper, chrome, copper, iron, manganese, nickel, zinc and lead in the liver and muscle tissues were determined by ICP-AES. The highest levels of each metal were found in the liver and this was followed by the muscle in both species. Among the metals analyzed, Cu, Zn and Fe were the most abundant in the different tissues while Cd and Pb were the least abundant both in Mullus barbatus (red mullet) and Merlangius merlangus (whiting). Regional changes in metal (Cd, Cu, Pb, Fe and Zn) concentration were observed in the tissues of both species, but these variations may not influence consumption advisories.     

Metals in tissues of fish from Yelkoma Lagoon, northeastern Mediterranean

This study was performed to investigate the metal concentrations in muscle, liver, gonad, and gill of gilthead seabream (Sparus aurata L., 1758), European seabass (Dicentrarchus labrax L., 1758), and keeled mullet (Liza carinata Valenciennes, 1836) from Yelkoma Lagoon, northeastern Mediterranean region. So, the levels of cadmium, cobalt, chromium, copper, iron, manganese, nickel, lead, and zinc in tissues of specimens from the lagoon were determined by inductively coupled plasma optical emission spectrometer. Concentrations of metals in muscles of the examined species ranged from 0.10 to 0.47 mg kg^???1 for cadmium, 0.10 to 0.43 mg kg^???1 for cobalt, 0.17 to 0.72 mg kg^???1 for chromium, 0.62 to 1.03 mg kg^???1 for copper, 28.9 to 52.3 mg kg^???1 for iron, 0.75 to 0.96 mg kg^???1 for manganese, 0.11 to 0.57 mg kg^???1 for nickel, 0.19 to 0.47 mg kg^???1 for lead, and 6.01 to 13.9 mg kg^???1 for zinc, respectively. Additionally, metal concentrations in muscles of fish were assessed for human uses according to provisional tolerable weekly intake and provisional tolerable daily intake.