Polycyclic aromatic hydrocarbon and n-alkane pollution characteristics and structural and functional perturbations to the microbial community: a case-study of historically petroleum-contaminated soil

Characterization of the typical petroleum pollutants, polycyclic aromatic hydrocarbons (PAHs) and n-alkanes, and indigenous microbial community structure and function in historically contaminated soil at petrol stations is critical. Five soil samples were collected from a petrol station in Beijing, China. The concentrations of 16 PAHs and 31 n-alkanes were measured by gas chromatography-mass spectrometry. The total concentrations of PAHs and n-alkanes ranged from 973 ± 55 to 2667 ± 183 μg/kg and 6.40 ± 0.38 to 8.65 ± 0.59 mg/kg (dry weight), respectively, which increased with depth. According to the observed molecular indices, PAHs and n-alkanes originated mostly from petroleum-related sources. The levels of ΣPAHs and the total toxic benzo[a]pyrene equivalent (ranging from 6.41 to 72.54 μg/kg) might exert adverse biological effects. Shotgun metagenomic sequencing was employed to investigate the indigenous microbial community structure and function. The results revealed that Proteobacteria and Actinobacteria were the most abundant phyla, and Nocardioides and Microbacterium were the important genera. Based on COG and KEGG annotations, the highly abundant functional classes were identified, and these functions were involved in allowing microorganisms to adapt to the pressure from contaminants. Five petroleum hydrocarbon degradation-related genes were annotated, revealing the distribution of degrading microorganisms. This work facilitates the understanding of the composition, source, and potential ecological impacts of residual PAHs and n-alkanes in historically contaminated soil.

     

Facile in situ synthesis of silver nanocomposites based on cellulosic paper for photocatalytic applications

Environmental Science and Pollution Research - In this work, various photocatalysts were synthesized with an impregnation-precipitation process to in situ decorate Ag-based nanoparticles (NPs,...     

Bottom-up re-estimations of greenhouse gas and atmospheric pollutants derived from straw burning of three cereal crops production in China based on a national questionnaire

Environmental Science and Pollution Research - Crop straw open burning is considered as an important source of greenhouse gas and atmospheric pollutants emissions, which affects global climate...     

上海市含碳大气颗粒物的粒径分布

使用STAPLEX大流量六级采样器(<0.49μm、0.49～0.95μm、0.95～1.5μm、1.5～3.0μm、3.0～7.2μm和>7.2μm),结合DRI Model 2001热光碳分析仪(TOR),分析了2010年5月～2011年5月期间上海市嘉定区(市郊)、徐汇区(市区)的大气颗粒物样品中有机碳(OC)和元素碳(EC)的粒径分布.结果表明,不同粒径的OC和EC质量浓度均呈双峰分布,较高峰出现于<0.49μm粒径段,次高峰则出现于>3.0μm的两个粒径段.嘉定区(JD)和徐汇区(XH)PM3.0中OC的质量浓度分别为16.35μg.m-3和11.85μg.m-3,EC质量浓度分别为2.22μg.m-3和1.91μg.m-3,市郊大气颗粒物中碳组分质量浓度高于市区,说明市郊碳污染更为严重.在<1.5μm的粒径段,嘉定区OC与EC的同源性较好,表明其中大部分OC来自于燃烧源.两地区不同粒径OC/EC值与不同排放源特征值的对比,可以说明徐汇区更多受到机动车尾气排放和道路扬尘的影响.通过EC示踪法计算二次有机碳(SOC)质量浓度可知:上海市SOC质量浓度较高,PM3.0中达到6.76μg.m-3,占OC的质量分数为69%,粒径分布呈双峰分布,峰值位于0.49～0.95μm和3.0～7.2μm粒径段.     

开顶式气室原位研究水稻汞富集对大气汞浓度升高的响应

采用开顶式气室熏气实验和土壤加汞培育实验,原位研究水稻各器官汞富集对大气汞质量浓度升高的响应关系.结果表明,水稻根中汞含量与大气汞质量浓度无显著相关性(P0.05),与土壤汞含量呈显著正相关(R=0.998 8,P0.05),表明水稻根中的汞主要来自于对土壤中汞的吸收累积.水稻茎中汞含量随大气汞质量浓度的升高呈线性增加(RB=0.964 6,RU=0.983 1,P0.05),且上部茎中汞含量高于下部茎;茎下部汞含量随土壤汞含量的升高呈线性增加(R=0.990 1,P0.05),茎上部汞含量随土壤汞含量的升高呈二次拟合增加(R=0.998 9,P0.05),且下部茎汞含量高于上部茎,说明茎汞含量受土壤和大气汞浓度的共同影响.水稻叶中汞含量与大气汞质量浓度呈显著正相关(R=0.998 5,P0.05),与土壤汞含量也有很好的线性关系(R=0.998 3,P=0.058 5),表明水稻从大气吸收的汞主要积累在叶片中,从土壤吸收的汞主要富集在根中并通过茎部向叶部传输.利用实验建立的函数关系对水稻地上生物质中汞的大气来源估算,至少60%~94%和56%~77%水稻叶和上部茎中的汞来自大气,而大气对下部茎仅贡献8%~56%.由此水稻地上部分生物质汞主要来自对大气汞的吸收,为区域大气汞的收支及汞循环模型提供理论依据.     

不同湿地模型中根系微生物的多样性

为了研究不同植物和滤料组合的小型湿地模型在处理养殖池塘水体过程中根系微生物群落的特征,并分析植物对根系微生物富集的影响,本研究对两种植物(茭白和慈菇)和两种滤料(石榴石和磁铁矿)进行组合构建了6种不同的湿地模型,并利用高通量测序技术分析湿地植物根系微生物的结构特点和多样性.结果表明:不同湿地模型根系微生物的种类和数量各不相同;所有收集的微生物总体上属于52个门,118个纲,455科,905个属和1 426个种;根据Shannon指数,茭白(平均为5.77)比慈菇(平均为5.29)在微生物富集方面具有更强的能力;但是,慈菇和茭白根系微生物中变形菌门的比例分别平均为61.97%和51.78%,说明慈菇能够更好地富集变形菌.β-变形菌纲为实验期间不同植物根际富集的主要细菌类群.本研究结果为人工湿地植物优化选择提供了理论基础和湿地组合最佳构建提供了基础资料.     

Adsorption of Co(Ⅱ) from aqueous solutions by water treatment residuals

A study on the removal of Co(Ⅱ) from aqueous solutions by water treatment residuals(WTR)was conducted in batch conditions. The sorption process of Co(Ⅱ) followed pseudosecondorder kinetics, with 30 hr required to reach equilibrium. Using the Langmuir adsorption isotherm model, a relatively high maximum sorption capacity of 17.31 mg/g Co(Ⅱ) was determined. The adsorption of Co(Ⅱ) was dependent on pH values and was affected by the ionic strength. Results show that Co(Ⅱ) adsorption was a spontaneous endothermic process and was favorable at high temperature. Most of the adsorbed Co(Ⅱ) stayed on the WTR permanently, whereas only small amounts of adsorbed Co(Ⅱ) were desorbed. The shifting of peaks in FT-IR spectra indicated that Co(Ⅱ) interacted with the WTR surface through strong covalent bond formation with Fe(Al)–O functional groups. It was concluded that WTR can be a suitable material from which to develop an efficient adsorbent for the removal of Co(Ⅱ) from wastewater.     

光散射法与β射线衰减-光散射联用法颗粒物在线测量方法对比

为考察光散射法和β射线衰减-光散射联用法的适用性,以β射线衰减法颗粒物自动监测仪（BAM）为标准,于2016年2月4日-4月18日,在中国环境科学研究院利用β射线衰减-光散射联用法颗粒物自动监测仪（MP-CPM）与光散射法传感器对ρ（PM₁₀）和ρ（PM_2.5）测量结果进行了对比.结果表明:① MP-CPM与BAM测量ρ（PM₁₀）的结果具有较好的一致性,相关系数为0.92,平均相对偏差为0.04%;ρ（PM_2.5）结果一致性较差,相关系数为0.69,MP-CPM测量ρ（PM_2.5）整体较高于BAM,平均相对偏差为45.8%.② 光散射法传感器与BAM测量ρ（PM_2.5）结果一致性较好,相关系数为0.85,平均相对偏差为11.24%,但ρ（PM₁₀）远低于BAM,平均相对偏差为-44.64%.在特殊污染情景下,光散射法将因受到较大影响而严重错估颗粒物浓度.烟花燃放期间,MP-CPM和光散射法传感器严重低估颗粒物浓度,与BAM测量颗粒物浓度的平均相对偏差均低于-50%;沙尘污染过程中,MP-CPM严重高估ρ（PM_2.5）,与BAM测量ρ（PM_2.5）结果平均相对偏差为79.27%,光散射法传感器严重低估ρ（PM₁₀）,与BAM测量ρ（PM₁₀）结果平均相对偏差为-59.35%.研究显示,不同原理的仪器,在不同的使用场景下应该区别对待.      

某钢铁企业颗粒物无组织排放核算与监测对比分析

以济南东部老工业区一家大型钢铁企业为例,通过前期调研和排放系数核算出颗粒物(TSP)排放总量,再运用公式计算出厂区周边不同距离颗粒物(TSP)的落地浓度。将该落地浓度与厂区周边颗粒物(TSP)的监测值进行对比分析,充分印证了连续点源扩散的高斯模式的准确性和可行性。随着气流经过该厂区,对比上下风向监测点位颗粒物(TSP)浓度迅速升高(增大1.04倍),下风向颗粒物(TSP)浓度超出二级标准1.32倍;颗粒物(TSP)的落地浓度在厂区不同距离上的浓度变化明显,从0.1到10 km其落地浓度稀释了约3 500倍,距离>4 km时,无组织排放的颗粒物(TSP)对周围空气质量直接影响有限。     

水体pH值时空变化条件下絮凝除藻剂的pH值优化

研究了由光照、水深等造成的水体pH值变化对絮凝剂除藻效果的影响,并监测絮凝前后不同深度的水体pH值。结果表明:1)当水体pH值无垂向分层,但随光照在8.5~10.5变化时,表层水体终点pH值为5.8~7.9,除藻效率均高于80%,此时中下层水体pH值为5.4~8.0;2)当水体pH值有垂向分层,表层水体终点pH值为7.0~7.3时,除藻效率均高于80%,此时中下层水体pH值为7.0~7.1;3)水池实验中,当表层水体终点pH为6.8时,除藻率高达99.33%,此时中下层水体pH值为7.0~7.1,池水清澈见底。上述结果说明:不论水体pH值是否垂向分层,控制表层水体终点pH值为6.8~7.3时既能有效除藻,也不会使底层水体pH值过低;水体pH值有垂向分层时,絮凝剂的pH值应高于无垂向分层时的情况。