膜生物反应器中的膜污染问题

本文主要论述了一体式膜生物反应器的膜污染问题 ,包括膜污染的数学模型、膜污染种类以及防止膜污染的设计与操作、膜清洗等。     

Dance precision of <Emphasis Type="Italic">Apis florea</Emphasis>—clues to the evolution of the honeybee dance language?

All honeybee species make use of the waggle dance to communicate the direction and distance to both food sources and potential new nest sites. When foraging, all species face an identical problem: conveying information about profitable floral patches. However, profound differences in nesting biology (some nest in cavities while others nest in the open, often on a branch or a cliff face) may mean that species have different requirements when dancing to advertise new nest sites. In cavity nesting species, nest sites are a precise location in the landscape: usually a small opening leading to a cavity in a hollow tree. Dances for cavities therefore need to be as precise as possible. In contrast, when the potential nest site comprises a tree or perhaps seven a patch of trees, precision is less necessary. Similarly, when a food patch is advertised, dances need not be very precise, as floral patches are often large, unless they are so far away that recruits need more precise information to be able to locate them. In this paper, we study the dance precision of the open-nesting red dwarf bee Apis florea. By comparing the precision of dances for food sources and nest sites, we show that A. florea workers dance with the same imprecision irrespective of context. This is in sharp contrast with the cavity-nesting Apis mellifera that increases the precision of its dance when advertising a potential new home. We suggest that our results are in accordance with the hypothesis that the honeybees’ dance communication initially evolved to convey information about new nest sites and was only later adapted for the context of foraging.     

粘土矿物对烷基酚聚氧乙烯醚的吸附行为

烷基酚聚氧乙烯醚(APEOn)是一类重要的非离子表面活性剂,广泛地应用于工业、农业和日常生活中.近年来,由于其生物代谢产物被证实具有较大的毒性,因此引起人们广泛关注.文章使用自然界广泛存在的天然蒙脱土对APEOn类物质NP9、NP10、TX-100进行吸附,该技术可为使用粘土矿物去除此类污染物提供理论依据.研究结果表明:APEOn在蒙脱土上有较高的吸附量,吸附等温线为S型,符合Langmuir-Freundlich吸附模型,吸附量大小为NP9>NP10>TX-100.温度对吸附的影响较大,在小于40 ℃时,升高温度吸附量减小,而当温度超过40 ℃时,升高温度则有利于吸附的进行.pH值对吸附的影响较小.吸附动力学拟合结果表明,APEOn在蒙脱土上的吸附符合假二级反应动力学,在初始质量浓度为300 mg·L-1时,NP9、NP10、TX-100的吸附速率常数分别为0.377、0.126、0.085 g·mg-1·min-1.解吸实验表明,在纯水中APEOn从蒙脱土上的解吸率并不大,但在乙醇溶液中,解吸率大大提高.     

多隔室厌氧折流板反应器(ABR) 的水力特性试验研究

对ABR反应器的水力流态进行了示踪剂试验,分析了特征截面面积对ABR水力特性的影响,采用停留时间分布(RTD)法研究了不同进水COD浓度和HRT条件下ABR反应器的水力特性,结果表明不同进水COD浓度时ABR反应器的RTD曲线相似,表明进水COD浓度不是影响ABR水力特性的主要因素;不同HRT条件下RTD曲线差异很大,表明HRT对ABR的水力特性影响较大,随着水力停留时间的延长,N值增大,1/Pe减小,ABR的流态趋于推流流态,随着HRT的缩短,N值减小,1/Pe数增大,ABR反应器趋于完全混合流态.     

美国清洁空气战略规划

为维护和改善空气质量,2003年美国EPA制定了未来5年的清洁空气战略规划,包括室外空气、室内空气、大气改善、辐射防护以及科学研究5个组成部分.EPA的战略规划措施为:①强调与州、地方、部落之间的紧密合作,加大与非政府组织和专业团体间交流;②采取创新的方法制定出有关政策、规章和非规章性措施,包括绩效方法、激励与自愿计划、环境管理系统、提高环境工作者积极性措施等;③继续加大国际间协作,减少越境污染的发生.      

铝镁氢氧化物溶胶吸附脱色性能的研究

对染料在具有永久正电荷的铝镁氢氧化物上的吸附,考察了铝镁比、染料类型、pH值等因素对吸附效果的影响,并进行了动力学、热力学研究结果表明,铝镁氢氧化物溶胶具有良好的脱色效果,铝镁比为1∶3的溶胶处理效果最佳;溶胶对大多数阴离子型染料的脱色率明显大于其它类型;染料的吸附量随pH值的增大而减小;溶胶对实验的各种阴离子型染料的饱和吸附量在961—3319mg·g-1之间;吸附量随温度升高而减小,说明吸附是放热过程     

天然色素生产废水的生物处理研究

天然色素生产废水是一种色度大、难处理的高浓度有机废水,为了寻找该废水的有效处理方法,本文作者采用由升流式厌氧污泥床(UASB)、生物接触氧化、混凝吸附组成的废水处理工艺,对该废水进行了处理试验,结果表明,对稀释4倍的原水,当进水COD为14900mg/L左右时,UASB经过36h的水力停留时间,COD的去除率为58.2%～60.2%、出水色度为180～270倍,SS为119～126mg/L,pH值为6.5～6.8;UASB出水经过24h好氧生物接触氧化反应,COD的去除率超过90%,SS<70mg/L;最终经过Ca(ClO)2氧化和煤渣吸附深度处理,脱色可至无色,出水COD为200mg/L以下。UASB生物接触氧化氧化吸附组合处理工艺处理该类天然色素生产废水是可行的。     

有机磷酸酯阻燃剂的人群暴露和甲状腺毒性的研究进展

有机磷酸酯(organophosphate esters,OPEs)是使用最为广泛的有机磷阻燃剂,并兼具增塑剂、消泡剂和萃取剂等功能,被广泛用于电子产品、建筑材料和塑料材料等中,导致其在环境介质中普遍存在,对生态系统和人体健康构成巨大威胁.作为一种新型环境污染物,OPEs的人群暴露特征和生物毒性成为环境健康领域的研究热...     

Thermogravimetric analysis and kinetic study on pyrolysis of representative medical waste composition

To obtain detailed information on the pyrolysis characteristics, a thermogravimetric study on the pyrolysis of 14 typical medical waste compositions was carried out in thermogravimetric analysis (TGA) equipment using dynamic techniques in a stream of N(2). An index representing pyrolysis reactivity of waste was presented. Kinetic parameters were obtained by Coats-Redfern method and used to model the TG curve. The results showed that: (a) Plastic, protein, cellulosic material, synthetic fibre, and rubber entered pyrolysis process in succession. (b) There was one decomposition stage in the pyrolysis of one-off medical glove, operating glove, cellulosic waste, absorbable catgut suture and adhesive plaster, while other components had two obvious weight loss stages. (c) The obtained apparent activation energy for second stage pyrolysis was comparably higher than that for first stage. (d) Each stage was controlled by only one kinetic mechanism, in which kinetic parameters were constant. (e) The degradation kinetics of medical waste may be affected by special physical and chemical treatment in the product manufacturing process. (f) Among 13 waste samples, the pyrolysis index of cellulosic matter was the highest, which indicated cellulosic matter had strong pyrolysis reactivity. (g) With increasing heating rate, TG curve and DTG peak shifted to high temperatures and main reaction interval of the sample became longer.     

水体中重要污染元素化学形态分析研究方法及其进展

概述了元素化学形态分析的意义、概念和范围，元素化学形态分析与模拟计算方法，并分别对某些重要元素的化学形态分析方法的进展作了综述，介绍了１１５篇文献。