Effect of magnetic field on the removal of copper from aqueous solution using activated carbon derived from rice husk

Adsorptive removal of copper by activated carbon derived from modified rice husk (ACRH) was studied in the presence and absence of magnetic field (MF). The ACRH was prepared from the normal rice husk treated by NaOH solution and subsequent pyrolysis at 450 °C in the absence of oxygen. The physicochemical properties of ACRH's were determined before and after the adsorption process to delineate the adsorption mechanism. The BET analysis confirmed that the fabricated ACRH has a specific surface area of 8.244 m²/g with a mesopore to micropore ratio of 0.974. It was observed that the micropore structure gradually replaced the mesopores, and the surface area of the micropore increased (from 0.9219 to 4.1764 m²/g), and the pore diameter was also decreased from 180.381 to 46.249 Å after pyrolysis. The CHNO/S test result reveals that the carbon content was increased from 42 to 67.8% in the ACRH after pyrolysis. The batch sorption studies were performed by varying the initial adsorbate concentration, temperature, agitation speed, pH, adsorbent dose and contact time for magnetic and non-magnetic conditions to analyze the effect of the magnetic field. The univariate studies show that the maximum experimental adsorption capacity was 4.522 mg/g and 3.855 mg/g, respectively, for these two conditions (representing the magnetic impact) at 25 °C with an adsorbent dose of 2 g/L and an agitation speed of 150 rpm. It was also observed that the removal efficiency was 94.55% and 77.96% (magnetic and non-magnetic condition) at pH 7 with a concentration of 10 mg/L in 2 h. The test result on the impact of exposure time on the magnetic field suggested that the magnetic memory influenced the removal efficiency; after 40 to 60 min, the maximum removal efficiency was achieved, around 80 to 90%. The pseudo-second-order kinetic model was best fitted with the experimental data with a rate constant as 0.1749 and 0.1006 g/mg/min for these two conditions. The Temkin model delineates the adsorption isotherm suggesting the heat generated during the adsorption process is linearly abate with the coverage of the surface area of the adsorbent. The thermodynamic model confirms that the copper adsorption is spontaneous (ΔG = ? 3.91 kJ/mol and ? 6.02 kJ/mol), wherein the negative enthalpy value (ΔH = ? 36.74 kJ/mol and ? 25.74 kJ/mol) suggested that the process is exothermic irrespective of magnetic interference. The significant enhancement of copper removal was observed by incorporating the magnetic field, showing an increase in sorption capacity by 17.48% and a reduction of reaction time by 88.12%.

     

Use of mercury in agriculture and its relationship to environmental pollution

Linuron samples at 75mg/L concentration were photolyzed with ultraviolet lamps or with natural sunlight. Ten photoproducts were identified and yields were determined for the more significant photoproducts resulting from either sunlight or ultraviolet lamp photolysis.     

Levels of elements in the surficial estuarine sediments of the Hugli River, northeast India and their environmental implications

The present paper is the first document of a detailed geochemical and mineralogical study of muddy to sandy mud estuarine sediments of the Hugli River collected from five different sites along its course in the coastal areas of West Bengal, northeast India. The present work attempts to establish the status of distribution and environmental implications of 52 elements in the surficial estuarine sediments and their possible sources of derivation. The level of both metallic and non-metallic elements shows a wide range of variation all along the course of the estuary and can be attributed to their differential derivation from the source rocks and differential discharge of untreated effluents originating from industrial, agricultural, aquacultural as well as domestic sewage. The element contents, particularly the heavy metal content in the sediments, are the lowest in the upstream part of the estuary at Diamond Harbor, whereas, these are slightly higher in the intermediate stretch of the estuary at Haldia to highest in the mouth of estuary at Gangasagar. These changes indicate that the metals that are carried from upstream find their ultimate depositional sink at the delta mouth near Gangasagar, where almost all the elements showed elevated values. The majority of the elements have their highest concentrations at Canning, a site within the tidal channel network of the Hugli-Matla drainage basin away from the direct influence of the Hugli River. This site is severely contaminated with huge organic load from domestic sewage, aquaculture, intensive trawling activities and agricultural runoff. Moreover, the site suffers from heavy siltation load causing an almost moribund condition of Matla River at this point. Equi-dimensional quartzo-feldspathic mineral grains are consistent components in the siliciclastic composition of the sediments and their sizes at each station are controlled by respective hydrodynamic conditions. Various flaky minerals (mica, chlorite, hornblende) are also present but show inconsistent patterns of distribution. These flaky minerals remain in suspension for a long time and do not follow the usual law of settling of particles depending on the hydrodynamic regime prevailing in the area. Presented data will serve as a baseline against which future anthropogenic effects may be assessed. A comprehensive account of heavy metal content in sediments from different coastal regions of peninsular India has also been presented for purpose of comparison.     

Heavy metals in water of the rivers Hooghly and Haldi at Haldia and their impact on fish

The paper deals with the measurement of five heavy metals viz., Cd, Cu, Mn, Pb and Zn in water of the rivers Hooghly and Haldi at Haldia during June 1999 to October 2002. The industrial effluent out fall (OF) at Patikhali, Haldia was also taken as sampling site along with above out fall (AOF) and below out fall (BOF) sites. Most of the metals exhibited their least concentration at the sampling site above the Haldia industrial area of river Hooghly. The average concentrations of the studied metals were Cd 2-14, Cu 5-19, Mn 8-88, Pb 17-41 and Zn 22-37 microg l(-1). Comparison of the data with the Criterion Continuous Concentration (CCC) of USA revealed that Cd, Cu and Pb were the pollutants present at alarming level to disturb the aquatic life process in the zone. The effect was found to reflect on the tissue level aberrations in the residential fishes. The other two metals viz., Mn and Zn were probably less harmful to the aquatic ecosystem. In India, necessity is felt to develop the CCC values, which will be more appropriate for protection of aquatic environment than comparing with drinking water standards.     

Adsorption of arsenic(V) by activated carbon prepared from oat hulls

The efficiency of self-manufactured activated carbon (AC) produced from oat hulls in adsorbing arsenic(V) was tested in a batch reactor. The results indicated that the adsorptive capacity of AC was affected by initial pH value, with adsorption capacity decreasing from 3.09 to 1.57 mg As g(-1) AC when the initial pH values increased from 5 to 8. A modified linear driving force model conjugated with a Langmuir isotherm was created to describe the study's kinetics. The test results show that rapid adsorption and slow adsorption exist simultaneously when AC is used to remove arsenic(V).     

Assessment of the impact of pesticide residues on microbiological and biochemical parameters of tea garden soils in India

The main aim of this study was to assess the impact of pesticidal residues on soil microbial and biochemical parameters of the tea garden soils. The microbial biomass carbon (MBC), basal (BSR) and substrate induced respirations (SIR), β -glucosidase activity and fluorescein diacetate hydrolyzing activity (FDHA) of six tea garden soils, along with two adjacent forest soils (control) in West Bengal, India were measured. The biomass and its activities and biochemical parameters were generally lower in the tea garden soils than the control soils. The MBC of the soils ranged from 295.5 to 767.5 μ g g^{? 1}. The BSR and SIR ranged from 1.65 to 3.08 μ g CO₂-C g^{? 1} soil h^{? 1} and 3.08 to 10.76 μ g CO₂-C g^{? 1}h^{? 1} respectively. The β -glucosidase and FDHA of the soils varied from 33.3 and 76.3 μ g para-nitrophenol g^{? 1} soil h^{? 1} and 60.5 to 173.5 μ g fluorescein g^{? 1}h^{? 1}respectively. The tea garden soils contained variable residues of organophosphorus and organochlorine pesticides, which negatively affected the MBC, BSR, SIR, FDHA and β -glucosidase activity. Ethion and chlorpyriphos pesticide residues in all the tea garden soils varied from 5.00 to 527.8 ppb and 17.6 to 478.1 ppb respectively. The α endosulfan, β endosulfan and endosulfan sulfate pesticide residues in the tea garden soils ranged from 7.40 to 81.40 ppb, 8.50 to 256.1 ppb and 55 to 95.9 ppb respectively. Canonical correlation analysis shows that 93% of the total variation was associated with the negative impact of chlorpyriphos, β and α endosulfan and endosulfan sulfate on MBC, BSR and FDHA. At the same time ethion had negative impact on SIR and β -glucosidase. Data demonstrated that the pesticide residues had a strong impact on the microbial and biochemical components of soil quality.     

Efficacy of Vermicompost against fertilizers on Cicer and Pisum and on population diversity of N2 fixing bacteria

Vermicompost is a very important biofertilizer produced through the artificial cultivation of worms i.e. Vermiculture. Vermicompost is enriched with all beneficial soil bacteria and also contain many of the essential plant nutrients like N, P, K and micronutrients. It increases soil aeration, texture and jilt. In this work, study is being carried out to find out the effect of different fertilizers such as DAF, FYM and Vermicompost on various morphological parameters and on the in vitro growth of bacterial colonies and its diversity in relation to two important leguminous plants such as Pisum sp. and Cicer sp. Results showed that plant grown in Vermicompost pretreated soil exhibited maximum increase in all morphological parameters such as root length, shoot length, number of root branches, number of stem branches, number of leaves, number of flowers, number of pods and number of root nodules in four months sampling in comparison to untreated, FYM treated and DAP treated soils. Further in Vermicompost pretreated soil, number of N2 fixing bacterial colony was maximum and showed highest diversity indices (1.6 and 0.99 and 2.0 and 0.99 for Cicer sp. and Pisum sp. respectively) than FYM, DAP and untreated control. Thus not only does the Vermicompost stimulate plant growth but also it increases the N2 fixing bacterial population in soil and also its diversity.     

Delineation of groundwater development potential zones in parts of marginal Ganga Alluvial Plain in South Bihar, Eastern India

A part of the Gangetic Alluvial Plain covering 2,228 km², in the state of Bihar, is studied for demarcating groundwater development potential zones. The area is mainly agrarian and experiencing intensive groundwater draft to the tune of 0.12 million cubic metre per square kilometres per year from the Quaternary marginal alluvial deposits, unconformably overlain northerly sloping Precambrian bedrock. Multiparametric data on groundwater comprising water level, hydraulic gradient (pre- and post-monsoon), aquifer thickness, permeability, suitability of groundwater for drinking and irrigation and groundwater resources vs. draft are spatially analysed and integrated on a Geographical Information System platform to generate thematic layers. By integrating these layers, three zones have been delineated based on groundwater development potential. It is inferred that about 48% of the area covering northern part has high development potential, while medium and low development potential category covers 41% of the area. Further increase in groundwater extraction is not recommended for an area of 173 km², affected by over-exploitation. The replenishable groundwater resource available for further extraction has been estimated. The development potential enhances towards north with increase in thickness of sediments. Local deviations are due to variation of—(1) cummulative thickness of aquifers, (2) deeper water level resulting from localised heavy groundwater extraction and (3) aquifer permeability.