Foliar use of TiO2-nanoparticles for okra (Abelmoschus esculentus L. Moench) cultivation on sewage sludge–amended soils: biochemical response and heavy metal accumulation

Considering its richness in organic and inorganic mineral nutrients, the recycling of sewage sludge (SS) is highly considered as a soil supplement in agriculture. However, the fate of hazardous heavy metal accumulation in the crops cultivated in SS amended soils is always a source of concern. Since nanoparticles are widely recognized to reduce heavy metal uptake by crop plants; thus, the present experiment deals with okra (Abelmoschus esculentus L. Moench) cultivation under the combined application of SS and TiO₂-nanoparticles (NPs). Triplicated pot experiments were conducted using different doses of SS and TiO₂-NPs such as 0 g/kg SS (control), 50 g/kg SS, 50 g/kg SS?+?TiO₂, 100 g/kg SS, and 100 g/kg SS?+?TiO₂, respectively. The findings of this study indicated that among the doses of treatment combinations investigated, 100 g/kg SS?+?TiO₂ showed a significant (p?<?0.05) increase in the okra plant yield (287.87?±?4.06 g/plant) and other biochemical parameters such as fruit length (13.97?±?0.54 cm), plant height (75.05?±?3.18 cm), superoxide dismutase (SOD: 110.68?±?3.11 μ/mg), catalase (CAT: 81.32?±?3.52 μ/mg), and chlorophyll content (3.12?±?0.05 mg/g fwt.). Also, the maximum contents of six heavy metals in the soil and cultivated okra plant tissues (fruit, stem, and root regions) followed the order of Fe?>?Mn?>?Cu?>?Zn?>?Cr?>?Cd using the same treatment. Bioaccumulation and health risk assessment indicated that foliar application of TiO₂-NPs significantly reduced the fate of heavy metal accumulation under higher doses of SS application. Therefore, the findings of this study suggested that the combined use of SS and TiO₂-NPs may be useful in ameliorating the negative consequences of heavy metal accumulation in cultivated okra crops.

     

A Comparative Study On the Levels of Trace Metals in Some Mediterranean and Red Sea Fishes

Samples of Mugil cephalus, Liza ramada, Siganus luridus, Siganus rivulatus, Epinephelus alexandrinus, Epinephelus areolatus, Epinephelus fasciatus, Epinephelus chlorostigma, Cephalopholis argus and Cephalopholis sonnerati were collected from the Mediterranean and Red Seas and their muscle and bone analyzed by AAS for some trace metals (Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd, Pb). the results showed that these metals accumulate in the bones to a greater extent than in the muscle. the highest accumulated element is cobalt (4.7-20.8 times), while the lowest is lead (1.1-2.5 times). the accumulation is more pronounced in Red Sea species than in Mediterranean species. the elevated levels of lead in Mugil cephalus (2.6-3.0 mg kg^-1) and Epinephelus alexandrinus (3.0-3.9 mg kg^-1) were attributed to the intake in food in the polluted environment of Alexandria coastal water. the relationship between body size and concentration of trace metals using a standard linear regression technique gives a significant positive correlation for cobalt, manganese, iron and lead in the muscle, as well as for lead in the bones of Mugil species from the Red Sea, while the Mediterranean species showed little correlation.

There is a tendency for increased concentrations of the essential metals manganese, iron and copper with increasing trophic level of the fish, while the opposite is true for the toxic metals chromium and lead. Our results indicate that there is no risk from toxic metal concentrations in muscle of fish from the Mediterranean and Red Seas consumed by man even in contaminated areas.     

New insights in analysing parasitoid attracting synomones: early volatile emission and use of stir bar sorptive extraction

Summary. It is well known that feeding by Pieris brassicae caterpillars on cabbage leaves triggers the release of volatiles that attract natural antagonists such as the parasitoid Cotesia glomerata. The temporal dynamics in the emissions of parasitoid attracting volatiles has never been elucidated in this system. In a time course experiment, caterpillar infested leaves attracted the parasitoid within one hour after infestation. At such an early stage of infestation, as much as fifty percent of the parasitoids flew towards the infested plant in a wind tunnel bioassay, while only five percent flew towards the non-infested control plant. Three hours after infestation and later, the response to the volatiles from the infested plant reached its maximum and then continued at a constantly high level for the remaining 14 hours of the experiment. Chemical analyses of volatiles collected from infested leaves at short time intervals during the first 24 hours identified a total of ten compounds, comprising green leaf volatiles, terpenoids, and a nitrile. Significant increase of emission within the first 5 hours following initial herbivory was detected for (Z)-3-hexen-1-ol, (Z)-3-hexen-1-yl acetate, cineole and benzylcyanide. Subsequently, a coupled bioassay-chemical analysis procedure was developed allowing for testing and analyzing the same sample for future identification of the bioactive compounds. This was achieved by using stir bar sorptive extraction for the analysis of solvent extracts of caterpillar-damaged leaves.     

The arbuscular mycorrhizal fungus Glomus mosseae induces growth and metal accumulation changes in Cannabis sativa L

The effect of arbuscular mycorrhiza on heavy metal uptake and translocation was investigated in Cannabis sativa. Hemp was grown in the presence and absence of 100 microg g-1 Cd and Ni and 300 microg g-1 Cr(VI), and inoculated or not with the arbuscular mycorrhizal fungus Glomus mosseae. In our experimental condition, hemp growth was reduced in inoculated plants and the reduction was related to the degree of mycorrhization. The percentage of mycorrhizal colonisation was 42% and 9% in plants grown in non-contaminated and contaminated soil, suggesting a significant negative effect of high metal concentrations on plant infection by G. mosseae. Soil pH, metal bioavailability and plant metal uptake were not influenced by mycorrhization. The organ metal concentrations were not statistically different between inoculated and non-inoculated plants, apart from Ni which concentration was significantly higher in stem and leaf of inoculated plants grown in contaminated soil. The distribution of absorbed metals inside plant was related to the soil heavy metal concentrations: in plant grown in non-contaminated soil the greater part of absorbed Cr and Ni was found in shoots and no significant difference was determined between inoculated and non-inoculated plants. On the contrary, plants grown in artificially contaminated soil accumulated most metal in root organ. In this soil, mycorrhization significantly enhanced the translocation of all the three metals from root to shoot. The possibility to increase metal accumulation in shoot is very interesting for phytoextraction purpose, since most high producing biomass plants, such as non-mycorrhized hemp, retain most heavy metals in roots, limiting their application.     

Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)/Organomodified Montmorillonite Nanocomposites for Potential Food Packaging Applications

Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) is a versatile, biobased and biodegradable copolymer from the family of polyhydroxyalkanoates. This study aims to further ameliorate its properties in order to enhance its applicability for food packaging purposes through preparation of organomodified montmorillonite clay (OMMT) nanocomposites. Nanocomposites based on pure PHBHHx as well as commercial PHBHHx granulate, after a previous dry-mixing with OMMT in concentrations of 1, 3, 5 and 10 wt%, were prepared using melt blending and compression molding. Investigation of the samples showed well dispersed nanofiller and highly intercalated nanocomposites, resulting in a continuous decrease in gas permeability, lowering O₂, CO₂ and water vapor permeability with about 5–7 % and approximately 40 % at OMMT concentration of 1 and 10 wt%, respectively. Besides gas permeability, other properties were affected as well. Thermal stability of the samples increased gradually up to 5 wt% nanofiller, but was reduced at 10 wt%. In order to investigate the effects of OMMT and molecular weights on PHBHHx crystallization, nanocomposites were also produced by solvent-casting and compared to those obtained by melt-blending. Crystallization was retarded, because of severe lowering of molecular weight due to processing-induced chain scission, catalyzed by OMMT moisture. However, this reduction was counteracted for a large part by using commercial PHBHHx granulate, which has shown better crystallization properties. The samples were rendered increasingly more brittle, displaying higher Young’s modulus and severely reduced elongation at break. From this study it appeared that, upon viewing all affected properties as a whole, the sample based on commercial PHBHHx and containing 3 wt% OMMT shows most promise for possible applications, however further research must be performed in order to exploit their fullest potential.     

Chitosan for direct bioflocculation of wastewater

Environmental Chemistry Letters - Coagulation/flocculation is a major phenomenon occurring during industrial and municipal water treatment to remove suspended particles. Common coagulants are metal...     

Applications of chitosan in food,pharmaceuticals, medicine,cosmetics, agriculture,textiles, pulp and paper,biotechnology, and environmental chemistry

Environmental Chemistry Letters - Chitosan is a biopolymer obtained from chitin, one of the most abundant and renewable materials on Earth. Chitin is a primary component of cell walls in fungi, the...