COST COMPARISON BETWEEN CESSPOOL AND SANITARY SEWERAGE SYSTEMS IN SAUDI URBAN AREAS1

ABSTRACT: Extensive use is made of on-site wastewater disposal systems of cesspools due to the absence of a sanitary sewerage system in Saudi urban areas. This system has caused the groundwater table to rise to a public nuisance level. A health risk has also evolved. There are several infrastructural, environmental, and social impacts from this, resulting in great financial losses. Examples are: surface water flooding, damage to foundations of buildings and asphalt street pavements, flooded basements and added construction costs required for excavation, dewatering, insulation materials, and special cements. Most of these costs are indirectly being paid by the private and public sectors. This study compares the estimated costs of damage and losses with the estimated costs of building, operating, and maintaining sanitary sewerage systems in the cesspool-served areas. The annual cost of the cesspool system, depending on the severity of the adverse impacts, ranges from 2.2 to 4.4 times the annual cost of the sanitary sewerage system. Remedies for these impacts are very expensive, and delays in the implementation of the sanitary sewerage facility will make the damage recovery more expensive, and in some cases, impossible. Thus, it is recommended that highest priority to be given to the sanitary sewerage systems in Saudi urban areas.     

Soil-to-plant transfer of radiocaesium for selected tropical plant species in Bangladesh

Soil-to-plant transfer factors (TF) of radiocaesium (137Cs) were determined under field condition for grassy vegetation grown in Bangladesh at contaminated land in the Atomic Energy Research Establishment (AERE) campus. TF values for rice, grass and grassy/root vegetations grown in the same type of soil were also measured under pot condition. TF values of 137Cs for grassy vegetation (2.4 x 10(-2) -4.2 x 10(-2) with an average of 3.1 x 10(-2) +/-0.005) obtained under field condition were slightly lower than the values for grass and grassy/root vegetations (2.9 x 10(-2) -6.6 x 10(-2) with an average of 4.8 x 10(-2) +/-0.01 for grass and grassy vegetations and 2.3 x 10(-2) -5.6 x 10(-2) with an average of 4.0 x 10(-2) +/-0.009 for root vegetations, respectively) obtained under pot condition. However, TF values (9.0 x 10(-3) -2.6 x 10(-2) with an average of 1.9 x 10(-2) +/-0.004) obtained for rice were about a factor of 4 lower than the values obtained for grass and grassy/root vegetations. When the properties of the AERE soils as input parameters were used in the soil-plant transfer model of Absalom, the estimated TF values (4.5 x 10(-2) -6.7 x 10(-2) with an average of 5.3 x 10(-2) +/-0.006) were consistent with the measured values obtained for grass and grassy vegetations under pot condition, however, the model overestimates the TF values for rice.     

Fenton degradation of dialkylphthalates: products and mechanism

Contamination of wastewater by organic pollutants is a major worldwide issue. For instance plastic additives such as phthalates are found in wastewater. Efficient techniques are thus needed to clean wastewaters. The Fenton reaction involving H₂O₂ and Fe(II) salts can be used to treat polluted water. During the Fenton reaction pollutants are decomposed directly by hydroxyl radicals. In some cases toxic by-products are produced. Here dimethyl phthalate, diethyl phthalate, and dipropyl phthalate by-products formed during the Fenton reaction were studied. Fenton degradation of selected phthalates yielded numerous transformation products such as hydroxylated phthalates. The hydroxylation reaction occurred at the aromatic ring of phthalates and yielded mono- and dihydroxylated phthalates. For monohydroxylated phthalate, 3-hydroxy- and 4-hydroxydialkylphthalates are the main transformation products. In addition to hydroxylated derivatives, aliphatic chain degraded mono- and dihydroxylated phthalates were also detected.     

Stagnant surface water bodies (SSWBs) as an alternative water resource for the Chittagong metropolitan area of Bangladesh: physicochemical characterization in terms of water quality indices

The concern over ensuing freshwater scarcity has forced the developing countries to delve for alternative water resources. In this study, we examined the potential of stagnant surface water bodies (SSWBs) as alternative freshwater resources in the densely populated Chittagong metropolitan area (CMPA) of Bangladesh??where there is an acute shortage of urban freshwater supply. Water samples were collected at 1-month intervals for a period of 1 year from 12 stations distributed over the whole metropolis. Samples were analyzed for pH, water temperature (WTemp), turbidity, electrical conductivity (EC), total dissolved solids, total solids, total hardness, dissolved oxygen (DO), chloride, orthophosphates, ammonia, total coliforms (TC), and trace metal (Cd, Cr, Cu, Pb, As, and Fe) concentrations. Based on these parameters, different types of water quality indices (WQIs) were deduced. WQIs showed most of CMPA-SSWBs as good or medium quality water bodies, while none were categorized as bad. Moreover, it was observed that the minimal water quality index (WQI_m), computed using five parameters: WTemp, pH, DO, EC, and turbidity, gave a reliable estimate of water quality. The WQI_m gave similar results in 72% of the cases compared with other WQIs that were based on larger set of parameters. Based on our finding, we suggest the wider use WQI_m in developing countries for assessing health of SSWBs, as it will minimize the analytical cost to overcome the budget constraints involved in this kind of evaluations. It was observed that except turbidity and TC content, all other quality parameters fluctuated within the limit of the World Health Organization suggested standards for drinking water. From our findings, we concluded that if the turbidity and TC content of water from SSWBs in CMPA are taken care of, they will become good candidates as alternative water resources all round the year.     

Direct and Indirect Effects of Socioeconomic Factors on Age at First Marriage in Slum Areas,Bangladesh

This article attempts to examine the influence of some selected predictor variables on female age at first marriage in slum areas of Bangladesh. A path and multiple classification analysis (MCA) approach have been adopted. Authors thought that respondent’s educational level and the mass media such as watching television have a significant direct impact on age at marriage, while the types of family and occupational status have an indirect effect on age at marriage.