几种印染助剂对壳聚糖稳定纳米铁去除酸性品红的影响

以氯化铁为铁源,硼氢化钠为还原剂,壳聚糖为稳定剂,采用液相还原法制备壳聚糖稳定纳米铁（CS-nZⅥ）;研究了印染废水中常见助剂NaNO₃、Na₂SO₄、NaH₂PO₄、K₂Cr₂O₇、EDTA二钠盐存在下,超声波辅助CS-nZⅥ对酸性品红（AF）降解的影响。结果表明,反应15 min,0.01 g CS-nZⅥ对25 mL、100 mg/L AF的去除率高达99.9%;各种助剂的存在使得纳米铁表面不同程度失活,阻碍反应的进行,使得AF的去除率下降。NaNO₃、K₂Cr₂O₇、EDTA二钠盐与纳米铁发生反应,与AF存在明显的竞争作用。重复利用实验表明,CS-nZⅥ重复利用7次仍具有一定的反应活性。此外,CS-nZⅥ对加标（50 mg/L）实际废水中AF的去除率达到99%以上,表明CS-nZⅥ是一种潜在的环境修复材料。     

Bipolar charged aerosol agglomeration and collection by a two-zone agglomerator

ＩｎｔｒｏｄｕｃｔｉｏｎＢｅｃａｕｓｅｏｆｔｈｅｌｏｗｅｆｆｉｃｉｅｎｃｙｏｆｔｈｅｅｌｅｃｔｒｏｓｔａｔｉｃｐｒｅｃｉｐｉｔａｔｏｒ (ＥＳＰ)ｆｏｒｃｏｌｌｅｃｔｉｎｇｔｈｅｓｕｂｍｉｃｒｏｎｐａｒｔｉｃｌｅｓ ,ｔｈｅｅｌｅｃｔｒｉｃａｌａｇｇｌｏｍｅｒａｔｉｏｎｍｅｔｈｏｄｈａｓｌｅｄｔｏａｎｉｎｃｒｅａｓｉｎｇｉｎｔｅｒｅｓｔｉｎｒｅｄｕｃｉｎｇｔｈｅｅｍｉｓｓｉｏｎｏｆｔｈｅｆｉｎｅｐａｒｔｉｃｌｅｓ .Ｍａｎｙａｕｔｈｏｒｓｈａｖｅｓｔｕｄｉｅｄｅｌｅｃｔｒｉｃａｌａｇｇｌｏｍｅｒａｔｉ…     

镍基催化剂对污泥微波热解制生物气效能的影响

为实现污水污泥减量化、无害化及资源化的目标,在微波热解污水污泥基础上,进行了镍基催化剂对制取生物气效能影响的研究。采用元素分析对污泥元素进行检测,气/质联用分析(GC-MS)和气相色谱(GC)对热解生物气的组成和含量进行测定。实验结果表明,镍基催化剂的添加对微波热解污水污泥制取生物气有较大促进作用。5%添加量与800℃热解终温条件下具有最佳催化效果:生物气中H2、CO产量最大,H2产量由29 g/kg增加到35.8 g/kg,提升23.4%,CO产量由302.7 g/kg增加到383.3 g/kg,提升26.6%;同时催化剂还能提高热能利用效率,降低热解终温,即5%添加量在700℃热解终温时可达到空白800℃时的产气效果;镍基催化剂主要在500~600℃时发挥催化作用,加快了H2和CO的释放。微波热解污泥制取的生物气具有产量大、富含H2与CO等优点,可推动污水污泥的资源化进程。     

A method to extract algae toxin of microcystin-LR

A simple and low-cost method to obtain cyanobacterial toxin microcystin-LR(MC-LR) was developed. A new strain of Microcystis aeruginosa,named DC-1, producing microcystin-LR but not microcystin-RR, was separated from the field blooming algae samples of Dianchi Lake.in southwest of China. Following three times‘freeze and thaw treatment, the cultivated DC-cells were extracted with 40% methanol in water.The extract was centrifuged and the supernatant applied to a Hydrophilic-Lipophilic Balance(HLB) SPE cartridge.Eluted impuries with a certain gradient from 30% to 50% methanol in water, MC-LR was finally eluted from the HLB cartridge with 60%.may be used in adsorption and biodegradation experiments instead of using expensive standard reagents.     

我国东部冲积平原区水成土壤元素背景值地域分异规律

从气候条件、母质物质组成的差异以及河流上下游物质之间的联系等角度，讨论了我国东部冲积平原区土壤中１３种元素的地理分布趋势及影响因素。研究表明，大多数元素具有明显的南北向地域分布趋势，这种趋势是地带性和非地带性因素共同决定的，而以非地带因素更重要。此外，东部平原土壤与相应主要河流上游侵蚀区土壤微量元素含量具有很好的共轭关系。     

含氨氮催化剂生产废水的处理

采用加入淀粉的短程硝化-反硝化一体化技术处理低碳含NH3-N催化剂废水。通过中试确定了适宜的工艺参数,并在工业化装置上进行了验证。试验结果表明：在DO为0.5 mg/L左右、淀粉加入量为0.25 kg/ m3、HRT=30 h的条件下,短程硝化-反硝化一体化技术具有较好的处理效果,NH3-N去除率大于97%,且具有较强的抗冲击负荷的能力; 出水的COD<100 mg/L,ρ（NH3-N）<10 mg/L,达到GB 8978—1996《污水综合排放标准》的一级排放标准。工业化装置的运行费用以NH3-N计为2.3 元/kg、以废水计为4.6 元/t。该法适用于中低浓度（ρ（NH3-N）<300 mg/L）废水的处理。     

化学解耦联剂对活性污泥工艺中污泥产率的影响

采用3,3′,4′,5-四氯水杨酰苯胺(TCS)作为代谢解耦联剂添加到活性污泥工艺中,连续曝气分批培养实验结果表明,TCS在浓度高于1.0mg/L时是一种有效的化学解耦联剂,能显著地降低污泥产率.当TCS浓度为6.0mg/L时,污泥产率可降低约50%.在40d的运行期间,隔天分别在3个反应器中添加TCS 2.0、2.8和3.6mg/L,基质的去除能力和出水氨氮及总氮浓度均未受影响,污泥的SOUR值和脱氢酶活性相应增加,污泥的沉降性能也未见有明显影响.镜检发现,对照反应器中的污泥经40d运行后仍有丝状菌存在,而添加解耦联剂反应器中的污泥几乎无丝状菌的存在.以上结果表明,可以应用TCS来降低活性污泥工艺中的剩余污泥产量.     

场开挖爆破粉尘粒度分布特征杨房沟水电站料∗

通过分析杨房沟水电站料场开挖爆破粉尘的粒度分布特征,为改进爆破降尘工艺提供粉尘粒度学依据。在料场爆破区、工作平盘、出入沟、最终边帮等处采集粉尘样品,采用激光粒度分布仪测试粉尘样品的分散度;以粉尘粒度分布数据拟合分布函数,表明爆破粉尘的粒度分布函数呈现对数正态分布特征;与经典的罗森·拉姆勒(Rosin?Rammler)分布函数模型对比分析表明,对数正态分布函数用于描述爆破粉尘的粒度分布更加准确。基于对数正态分布函数模型,厘定爆破粉尘粒度分布参数,分析TSP、PM10、PM5、PM2.5及PM1粉尘占全尘的比例,定量表达爆破粉尘粒度分布特征。结果表明：杨房沟水电站料场爆破粉尘具有显著的对数正态分布特征;离爆破中心距离越远,粒度分布范围越窄,对人体有害粉尘占比越大;建议采用爆破粉尘捕捉吸附技术、掺和湿润性抑尘剂的水雾喷洒等降尘措施。     

废水产氢产酸/同型产乙酸耦合产酸条件优化

为了更好地发挥产氢产酸/同型产乙酸耦合系统在废水厌氧发酵生产乙酸方面的优势,有必要寻找一种简单有效的方法以获得该系统产酸的优化条件.利用经过加热处理并活化的厌氧污泥作种泥,以模拟废水中的葡萄糖为底物,针对发酵时间、底物浓度、种泥浓度、初始pH进行4因素10水平均匀设计实验,得到了乙酸生产指标与产酸条件之间关系的回归方程;也得到了以高乙酸产量为主要目标导向同时兼顾高乙酸产率和高乙酸生产强度目标的优化条件;优化条件实验乙酸浓度比均匀设计中最高乙酸浓度提高20%左右.研究表明,将均匀设计应用于废水产氢产酸/同型产乙酸耦合产酸条件优化,可以避免盲目性,迅速获得满意结果.     

Degradation and detoxification of microcystin-LR in drinking water by sequential use of UV and ozone

Microcystins (MCs) produced by cyanobacteria are strong hepatotoxins and classified as possible carcinogens.MCs pose a considerable threat to human health through tainted drinking and surface waters.Herein filtrated water from a waterworks in Harbin,China,was spiked with microcystin-LR (MC-LR) extracted from a toxic scum of microcystis aeruginosa,and the spiked sample waters were treated using UV irradiation with consequent ozonation process (UV/O3),compared with ozonation at a dose range commonly applied in water treatment plants,UV irradiation at 254 nm and UV irradiation combined with ozonation (UV+O3),respectively.The remaining of toxins were analyzed using high-performance liquid chromatography and also determined using a protein phosphatase type 2A inhibition assay,which was utilized to evaluate the reduction in toxicity.Results indicated that in comparison to other three processes (O3,UV,and UV+O3),UV/O 3 process could effectively decrease both the concentration and toxicity of MC-LR at 100 μg/L level after 5 min UV irradiation with consequent 5 min ozonation at 0.2 mg/L (below 1 μg/L),while 0.5 mg/L ozone dose was required for the level below 0.1 μg/L.The addition of an UV treatment step to the existing treatment train may induce significant transformation of micropollutants and breaks down the natural organic matters into moieties unfavorable for ozone decomposition,stabilizing the ozone residual.These findings suggested that sequential use of UV and ozone may be a suitable method for the removal of these potentially hazardous microcystins from drinking water.