Removal of Hg2+ ions by adsorption using (TiO2@MnO2)-NPs nanocomposite

Journal of Material Cycles and Waste Management - Waste water contaminated with inorganic mercury is considered a serious environmental problem, mainly due to the hazardous effects this contaminant...     

Adsorption of picloram on clays nontronite,illite and kaolinite: equilibrium and herbicide-clays surface complexes

The picloram (PCM) adsorption on nontronite, illite and kaolinite was studied at pH 3, 5 and 7. The adsorption isotherms had well-fitted to Langmuir and Freundlich models equations. The interactions of PCM with the clay mineral surfaces exhibited an anionic profile adsorption, with a decrease in adsorption when the pH increases. The PCM adsorption capacity increases in the following order: kaolinite?<?illite?<?nontronite. The X-ray diffraction (XRD) analysis of PCM-clay samples revealed that the picloram molecule does not enter into the clays basal space. The interaction of PCM with clays surface sites through nitrogen of the pyridine ring was confirmed by X-ray photoelectron spectroscopy (XPS). Due to the anionic form of PCM, the adsorption onto the external and edges surface sites of the clay minerals was proposed.     

Change in the antimicrobial resistance profile of Pseudomonas aeruginosa from soil after exposure to herbicides

The extensive use of pesticides represents a risk to human health and to the environment. This study aimed to investigate if the exposure to atrazine and diuron, two herbicides widely used in Brazil, could induce changes in the susceptibility profile to aztreonam, colistin and polymyxin B antimicrobials in isolates of P. aeruginosa obtained from soil samples by using the determination of minimum inhibitory concentration (MIC) test. Three isolates had an increase of MIC to aztreonam after exposure to both herbicides and one isolate did not show any MIC change. The MexAB-OprM efflux pump has already been upregulated in these isolates and the herbicides atrazine and diuron did not increase MexAB-OprM overexpression. Therefore, the decrease in aztreonam susceptibility was not directly related to this pump, suggesting that probably other mechanisms should be involved.     

Composites Produced from Natural Rubber and Chrome-Tanned Leather Wastes: Evaluation of their In Vitro Toxicological Effects for Application in Footwear and Textile Industries

A new composite has been developed from natural rubber and chrome-tanned leather waste for use in footwear and textile industries. The contribution of this material to environmental quality and sustained development should be highligh because chrome tanned leather wastes, a major environmental problem, can be recycled. However, the safety of this new material for human use is questionable, as it is already well reported in the literature that chromium, particularly in its hexavalent oxidation state, can be genotoxic and carcinogenic to living beings. Thus, the aim of this study was to evaluate in vitro biocompatibility of this composite material for possible use in the footwear and textile industries, through cytotoxicity, cell adhesion, and genotoxicity tests. Inductively coupled plasma optical emission spectrometry (ICP-OES) was used to measure both concentrations of total and hexavalent chromium. Based on the findings, it was concluded that the composite exhibits low levels of cytotoxicity and genotoxicity, and possesses favorable properties for initial cell adhesion. Furthermore, it was verified that the composites released low concentrations of chromium and that the predominant species released would be trivalent chromium. The results of the present study open the possibility of the incorporation of solid residues of tanned leather into chromium without necessarily the chromium contained in these residues influences the toxicity and genotoxicity of this new material.     

E‐waste in the world today: An overview of problems and a proposal for improvement in Brazil

Environmental issues have been at the center of society's concerns for a long time. Recently, this kind of concern is growing even more due to the damage caused to the environment by electrical and electronic product waste. Based on this same concern, this work aimed to analyze, through a literature review, the production and treatment of electronic waste in today's world, with an emphasis on Brazil and China. The articles reviewed point to an increase in the production of this type of waste, in both Brazil and China, and reveal that the current processes of treatment of electronic waste mostly aim to obtain profit through the recovery of precious metals such as copper. This paper concluded that although Brazil is one of the major producers of e‐waste, more than 90% of its e‐waste has not had a proper final destination. This deficiency in e‐waste treatment in Brazil is mainly due to financial factors and the lack of a robust educational policy focused on the environment. Thus, this work suggests the implementation of an effective educational policy aimed at environmental conservation, as well as investments in research on recycling methods in Brazil, especially on the use of e‐waste as an aggregate in the manufacture of concrete.     

Sugar–alcohol industry: quality of its biotreated washing water for reuse in fertigation

All processes in agro-industries consume water and generate large volumes of nutrient-rich effluents. To recycle effluents from a sugar–alcohol industry in the Northeastern Brazil (Coruripe, Alagoas), the effect of a daily application of a microbial formulation (containing five indigenous bacteria and two fungi), at the entrance of the two first facultative ponds (D, E) of its treatment plant formed by seven ponds (A–G), was evaluated in the sugarcane harvests of 2014/2015 and 2015/2016. Fortnightly, the values of 11 physicochemical parameters were checked and statistically compared (one and two-way ANOVA) in untreated (sedimentation pond A) and post-treated effluent (last facultative pond G), during both harvests. The treated effluent presented statistically significant improvements (p > 0.05), even between harvests, with averages of removal of organic matter of ca. 79.21% and 90.62%, and increases of the dissolved oxygen (DO) of ca. 72% and 74%, as well as the average increase of pH was ca. 42% and 50%. This better quality residue generally satisfied the class III level of the Brazilian Resolution 357/2005 (National Council for the Environment (CONAMA)), for water reuse in sugarcane irrigation on the yellow clay latosol soil, since it still is a light source of organic matter, nitrites and phosphorus, reducing the need of fertilizers for maintaining the productivity with low risk of salinization. According to Pearson’s bivariate correlation coefficient, while the DO and pH have positive correlation, they both have general inverse relation with the other physicochemical parameters evaluated and vice versa.     

Remediation of a biodiesel blend-contaminated soil by using a modified Fenton process

A soil contaminated with a B20 biodiesel blend (20 % biodiesel, 80 % diesel) has been treated by modified Fenton process with or without chelant addition. All experiments were conducted without pH adjustment. The reagents used were as follows: hydrogen peroxide as oxidant (400–4,000 mmol L^?1), ferric ion as catalyst (5–20 mmol L^?1), and trisodium citrate (50 mmol L^?1) as chelating agent. Soil was spiked at two different pollutant concentrations (1,000–10,000 mg diesel kg^?1 soil). Higher total petroleum hydrocarbon (TPH) removal efficiencies were obtained (up to 75 %) after the treatment in the absence of the chelant due to the low pH obtained in this case. In the presence of chelant, the TPH conversion obtained was lower because both higher pH is obtained and chelant competes with diesel for the oxidant. On the other hand, at neutral pH, the lifetime of the oxidant was increased. Fatty acid methyl esters (FAMEs) are easier to remove than diesel aliphatic hydrocarbons from the blend. An important decrease of the aqueous phase toxicity was observed after the modified Fenton reaction, supporting that nontoxic by-products were released to the aqueous phase during the treatment.     

Evaluation of the effect of different treatment methods on sugarcane vinasse remediation

Abstract

Sugarcane vinasse is a by-product obtained during ethanol production in sugar-ethanol plants. For each 1?L of ethanol produced approximately 11?L of vinasse are generated. As this residue is obtained in high amounts, it is used as fertilizer in sugarcane crops. However, despite being rich in nutrients, sugarcane vinasse is approximately one hundred times more polluting than domestic sewage, making it an environmental problem. Thus, the aim of the present study was to propose a treatment sequence for sugarcane vinasse and evaluate the possibility of energetic use of the generated sludge in the coagulation/flocculation stage. pH, conductivity, turbidity and decreases in UV/Vis absorption spectra were determined for each treatment step. In addition, the upper calorific value of the generated sludge was also determined, while ash (adsorption treatment) and catalyst (heterogeneous photocatalysis) characterizations were also carried out. At the end of the treatment, initial vinasse turbidity was reduced by 100% and pH and conductivity values were stabilized. The sludge presented a higher calorific value of approximately 3,000?kcal kg^?1 and the ash and catalyst displayed favorable characteristics to be applied to the sugarcane vinasse treatment stages.