Application to the Port of Sines of a new tool for risk assessment in port navigation

This paper describes a first approach on the risk assessment in port navigation using GUIOMAR, an integrated system for port and coastal engineering modelling developed at the National Civil Engineering Laboratory (LNEC), Portugal, using a GIS software environment. A set of automatic procedures was designed to include a new methodology based on the amplitude of the wave-induced vertical movement of a ship along its trajectory. In this methodology, the risk in port navigation is assessed on the basis of a combination of the probability of exceedance of a pre-set threshold for the ship??s vertical movements and its consequences. To test the new procedures, a set of sea wave records obtained at the Sines wave-buoy from 1988 to 2002 was transferred into Sines Port using two numerical models of sea wave propagation and deformation (SWAN and DREAMS), included in the GUIOMAR system. The numerical model WAMIT was used for estimating the wave-induced ship??s vertical movements inside the port. By applying the new procedures, automatic generation of risk maps was carried out for navigation in the vicinity of the West breakwater of the Port of Sines. The recent developments contribute towards a more versatile and efficient GUIOMAR system, which results in a more adequate tool to support decision-making processes in port and coastal management.     

Life cycle assessment of upflow anaerobic sludge blanket sludge management and activated sludge systems aiming energy use in the municipality of Itajubá, Minas Gerais,Brazil

Journal of Material Cycles and Waste Management - This study aimed to carry out the Life Cycle Analysis (LCA) targeting to decide the better management system for sludge from both Activated Sludge...     

Aeolian erosion of storage piles yards: contribution of the surrounding areas

Dust emissions from stockpiles surfaces are often estimated applying mathematical models such as the widely used model proposed by the USEPA. It employs specific emission factors, which are based on the fluid flow patterns over the near surface. But, some of the emitted dust particles settle downstream the pile and can usually be re-emitted which creates a secondary source. The emission from the ground surface around a pile is actually not accounted for by the USEPA model but the method, based on the wind exposure and a reconstruction from different sources defined by the same wind exposure, is relevant. This work aims to quantify the contribution of dust re-emission from the areas surrounding the piles in the total emission of an open storage yard. Three angles of incidence of the incoming wind flow are investigated ( $30^{\circ }, 60^{\circ }$ and $90^{\circ }$ ). Results of friction velocity from numerical modelling of fluid dynamics were used in the USEPA model to determine dust emission. It was found that as the wind velocity increases, the contribution of particles re-emission from the ground area around the pile in the total emission also increases. The dust emission from the pile surface is higher for piles oriented $30^{\circ }$ to the wind direction. On the other hand, considering the ground area around the pile, the $60^{\circ }$ configuration is responsible for higher emission rates (up to 67 %). The global emissions assumed a minimum value for the piles oriented perpendicular to the wind direction for all wind velocity investigated.     

Ecotoxicological assessment of sediment from Texcalac River and agricultural soil of riverside area,in Tlaxcala,Mexico

This study assesses the potential risk of Texcalac River and riparian area. The p,p′ DDT and ∑DDTs levels in agricultural soils (3.9–208.0?µg/kg) and in surface sediments (0.6–137?µg/kg) surpassing the guidelines for protection of aquatic life (75% > TEC). The ∑PCBs concentration oscillated from 135 to 93941?µg/kg; the half of sediments exceeded the international guidelines (PEL, PEC), as well as two soils (SQGE?=?500?µg/kg). The TEQ concentration of four PCB-DL varied between 0.1 and 24.9?µg TEQ/kg, chiefly affected by PCB 169. Five sediments were lethal for E. foetida, two resulted to be cytotoxic and the 58% produced genotoxicity higher than negative control (A?=?0.28?±?0.05; DICA?=?72.5?±?16.9 au). Likewise, 31.6% of samples increased the micronuclei frequency in V. faba in comparison with negative control. The analytical data and the bioassays results suggest a significant and immediate risk to exposed biota of this region, highlighting a specific area in Texcalac River and other one in Sambrano Ravine. It is necessity assess the dispersion of pollutants and perform biomonitoring studies that display the exposure levels in biota with the goal to characterise the ecotoxicological risk.     

Degradation and environmental risk of surfactants after the application of compost sludge to the soil

In this work, the degradation of anionic and non-ionic surfactants in agricultural soil amended with sewage sludge is reported. The compounds analysed were: linear alkylbenzene sulphonates (LAS) with a 10-13 carbon alkylic chain, and nonylphenolic compounds (NPE), including nonylphenol (NP) and nonylphenol ethoxylates with one and two ethoxy groups (NP1EO and NP2EO). The degradation studies were carried out under winter (12.7°C) and summer (22.4°C) conditions in Andalusia region. The concentration of LAS was reduced to 2% of the initial concentration 100 day after sludge-application to the soil. The half-life time measured for LAS homologues were ranged between 4 and 14days at 12.7°C and between 4 and 7 days at 22.4°C. With regard to NPE compounds, after 8 and 4days from the beginning of the experiment at 12.7 and 22.4°C, respectively, their concentration levels were increased to 6.5 and 13.5mg/kgdm (dry matter) as consequence of the degradation of nonylphenol polyethoxylates. These concentration levels were reduced to 5% after 63 and 70 days for 12.7°C and 22.4°C, respectively. The half-life times measured for NPEs were from 8 to 16 days at 12.7°C and from 8 to 18 days at 22.4°C. Environmental risk assessment revealed that for LAS homologues no environment risk could be expected after 7 and 8 days of sludge application to the soil for 22.4 and 12.7°C, respectively; however, potential toxic effects could be observed for the nonylphenolic compounds during the first 56 days after sludge application to the soil.     

E‐waste in the world today: An overview of problems and a proposal for improvement in Brazil

Environmental issues have been at the center of society's concerns for a long time. Recently, this kind of concern is growing even more due to the damage caused to the environment by electrical and electronic product waste. Based on this same concern, this work aimed to analyze, through a literature review, the production and treatment of electronic waste in today's world, with an emphasis on Brazil and China. The articles reviewed point to an increase in the production of this type of waste, in both Brazil and China, and reveal that the current processes of treatment of electronic waste mostly aim to obtain profit through the recovery of precious metals such as copper. This paper concluded that although Brazil is one of the major producers of e‐waste, more than 90% of its e‐waste has not had a proper final destination. This deficiency in e‐waste treatment in Brazil is mainly due to financial factors and the lack of a robust educational policy focused on the environment. Thus, this work suggests the implementation of an effective educational policy aimed at environmental conservation, as well as investments in research on recycling methods in Brazil, especially on the use of e‐waste as an aggregate in the manufacture of concrete.     

Sugar–alcohol industry: quality of its biotreated washing water for reuse in fertigation

All processes in agro-industries consume water and generate large volumes of nutrient-rich effluents. To recycle effluents from a sugar–alcohol industry in the Northeastern Brazil (Coruripe, Alagoas), the effect of a daily application of a microbial formulation (containing five indigenous bacteria and two fungi), at the entrance of the two first facultative ponds (D, E) of its treatment plant formed by seven ponds (A–G), was evaluated in the sugarcane harvests of 2014/2015 and 2015/2016. Fortnightly, the values of 11 physicochemical parameters were checked and statistically compared (one and two-way ANOVA) in untreated (sedimentation pond A) and post-treated effluent (last facultative pond G), during both harvests. The treated effluent presented statistically significant improvements (p > 0.05), even between harvests, with averages of removal of organic matter of ca. 79.21% and 90.62%, and increases of the dissolved oxygen (DO) of ca. 72% and 74%, as well as the average increase of pH was ca. 42% and 50%. This better quality residue generally satisfied the class III level of the Brazilian Resolution 357/2005 (National Council for the Environment (CONAMA)), for water reuse in sugarcane irrigation on the yellow clay latosol soil, since it still is a light source of organic matter, nitrites and phosphorus, reducing the need of fertilizers for maintaining the productivity with low risk of salinization. According to Pearson’s bivariate correlation coefficient, while the DO and pH have positive correlation, they both have general inverse relation with the other physicochemical parameters evaluated and vice versa.     

Enhancing p-cresol extraction from soil

Soil washing is a potential technology for rapid removal of organic hydrocarbons sorbed to soils. In this work, p-cresol desorption with different non-ionic surfactants (Tween 80, Brij 30 and Triton X-100) was compared to cyclodextrine and citrate as solubilizer. A series of batch extraction experiments were conducted at 20 °C using the field soil with different extracting solutions at various concentrations to investigate the removal efficiency and to optimize the concentration of the extractant. The use of the different extracting agents was very selective to p-cresol extraction, minimizing soil organic matter releasing and maintaining the natural pH of the soil. The highest asymptotic values of desorption percentages were obtained for Tween 80 and Brij 30 at 48 h. However, Brij 30 ecotoxicity (EC₅₀ = 0.5 mg L⁻¹) is in the same order of that obtained for p-cresol, being this surfactant clearly ruled out. Liquid to solid ratio of 2.5 mL g⁻¹ presented the best extraction results, while concentrations higher than 1 g L⁻¹ for Tween 80 and Citrate did not produce any significant effect on the desorption efficiency. p-Cresol extraction efficiencies higher than 70% and 60% for Tween 80 and Citrate, respectively.     

Mercury, lead and cadmium in human milk in relation to diet, lifestyle habits and sociodemographic variables in Madrid (Spain)

Background

Although breastfeeding is the ideal way of nurturing infants, it can be a source of exposure to toxicants. This study reports the concentration of Hg, Pb and Cd in breast milk from a sample of women drawn from the general population of the Madrid Region, and explores the association between metal levels and socio-demographic factors, lifestyle habits, diet and environmental exposures, including tobacco smoke, exposure at home and occupational exposures.

Methods

Breast milk was obtained from 100 women (20 mL) at around the third week postpartum. Pb, Cd and Hg levels were determined using Atomic Absorption Spectrometry. Metal levels were log-transformed due to non-normal distribution. Their association with the variables collected by questionnaire was assessed using linear regression models. Separate models were fitted for Hg, Pb and Cd, using univariate linear regression in a first step. Secondly, multivariate linear regression models were adjusted introducing potential confounders specific for each metal. Finally, a test for trend was performed in order to evaluate possible dose-response relationships between metal levels and changes in variables categories.

Results

Geometric mean Hg, Pb and Cd content in milk were 0.53 μg L⁻¹, 15.56 μg L⁻¹, and 1.31 μg L⁻¹, respectively. Decreases in Hg levels in older women and in those with a previous history of pregnancies and lactations suggested clearance of this metal over lifetime, though differences were not statistically significant, probably due to limited sample size. Lead concentrations increased with greater exposure to motor vehicle traffic and higher potato consumption. Increased Cd levels were associated with type of lactation and tended to increase with tobacco smoking.

Conclusions

Surveillance for the presence of heavy metals in human milk is needed. Smoking and dietary habits are the main factors linked to heavy metal levels in breast milk. Our results reinforce the need to strengthen national food safety programs and to further promote avoidance of unhealthy behaviors such as smoking during pregnancy.     

Diphenyl diselenide attenuates hepatic and hematologic toxicity induced by chlorpyrifos acute exposure in rats

Purpose

In this study, we investigated the effect of diphenyl diselenide [(PhSe)₂] on chlorpyrifos (CPF)-induced hepatic and hematologic toxicity in rats.

Methods

Rats were pre-treated with (PhSe)₂ (5?mg/kg) via the oral route (oral gavage) once a day for 7?days. On the eighth and ninth days, rats were treated with (PhSe)₂ (5?mg/kg) 30?min prior to CPF (50?mg/kg, by subcutaneous route). The aspartate aminotransferase, alanine aminotransferase, and lactate dehydrogenase activities were determined in plasma of rats. Lipid peroxidation, protein carbonyl, and non-protein thiol levels as well as catalase, superoxide dismutase, glutathione peroxidase, glutathione reductase, and gluthatione S-transferase activities were determined in livers of rats. Hematological parameters were also determined.

Results

The results showed that CPF caused hepatic oxidative damage, as demonstrated by an increase in lipid peroxidation and protein carbonyl levels which was associated with a decrease in antioxidant defenses. CPF exposure caused a reduction in the leukocyte, indicating hematologic toxicity. (PhSe)₂ was effective in attenuating these toxic effects caused by CPF exposure in rats.

Conclusions

The results indicated that (PhSe)₂ was effective in protecting the hepatic and hematologic toxicity induced by acute CPF exposure in rats.