A field trial to assess the performance of CO2-supersaturated water injection for residual volatile LNAPL recovery

A pilot scale field trial was conducted to evaluate the recovery of volatile, light non-aqueous phase liquids (LNAPLs) using a novel remediation method termed supersaturated water injection (SWI). SWI uses a patented technology to efficiently dissolve high concentrations of CO₂ into water at elevated pressures. This water is injected into the subsurface resulting in the nucleation of CO₂ bubbles at and away from the injection point. The nucleating bubbles coalesce, rise and volatilize residual LNAPL ganglia. In this study, an LNAPL composed of 103 kg of volatile pentane and hexane, and 30 kg of non-volatile Soltrol was emplaced below the water table at residual saturation. The SWI technology removed 78% of the pentane and 50% of the less volatile hexane. Contaminant mass was still being removed when the system was shut down for practical reasons. The mass removed is comparable to that expected for air sparging but a much smaller volume of gas was injected using the SWI system.     

SAFE—The Special Non-invasive Advances in Fetal and Neonatal Evaluation Network: aims and achievements

In this short review, the objectives and work of SAFE—the Special Non-invasive Advances in Fetal and Neonatal Evaluation Network, a European Union Framework VI network of excellence is described. We demonstrate how this network facilitates the implementation of non-invasive prenatal diagnosis (NIPD) for single gene disorders, fetal rhesus typing, aneuploidy and pregnancy complications. Copyright © 2008 John Wiley & Sons, Ltd.     

Latest developments in post-mortem foetal imaging

A sustained decline in parental consent rates for perinatal autopsies has driven the development of less-invasive methods for death investigation. A wide variety of imaging modalities have been developed for this purpose and include post-mortem whole body magnetic resonance imaging (MRI), ultrasound, computed tomography (CT) and micro-focus CT techniques. These are also vital for “minimally invasive” methods, which include potential for tissue sampling, such as image guidance for targeted biopsies and laparoscopic-assisted techniques. In this article, we address the range of imaging techniques currently in clinical practice and those under development. Significant advances in high-field MRI and micro-focus CT imaging show particular promise for smaller and earlier gestation foetuses. We also review how MRI biomarkers such as diffusion-weighted imaging and organ volumetric analysis may aid diagnosis and image interpretation in the absence of autopsy data. Three-dimensional printing and augmented reality may help make imaging findings more accessible to parents, colleagues and trainees.     

Using the 'protective environment' framework to analyse children's protection needs in Darfur

A major humanitarian concern during the continuing crisis in Darfur, Sudan, has been the protection of children, although there has been little in the way of comprehensive analysis to guide intervention. Founded on a situational analysis conducted between October 2005 and March 2006, this paper documents the significant threats to children's well-being directly linked to the political conflict. It demonstrates the role of non-conflict factors in exacerbating these dangers and in promoting additional protection violations, and it uses the 'protective environment' framework (UNICEF Sudan, 2006a) to identify systematic features of the current environment that put children at risk. This framework is shown to provide a coherent basis for assessment and planning, prompting broad, multidisciplinary analysis, concentrating on preventive and protective action, and fostering a systemic approach (rather than placing an undue focus on the discrete needs of 'vulnerable groups'). Constraints on its present utility in emergency settings are also noted.     

Outdoor air pollution in close proximity to a continuous point source

Data are lacking on human exposure to air pollutants occurring in ground-level outdoor environments within a few meters of point sources. To better understand outdoor exposure to tobacco smoke from cigarettes or cigars, and exposure to other types of outdoor point sources, we performed more than 100 controlled outdoor monitoring experiments on a backyard residential patio in which we released pure carbon monoxide (CO) as a tracer gas for continuous time periods lasting 0.5–2 h. The CO was emitted from a single outlet at a fixed per-experiment rate of 120–400 cc min^?1 (～140–450 mg min^?1). We measured CO concentrations every 15 s at up to 36 points around the source along orthogonal axes. The CO sensors were positioned at standing or sitting breathing heights of 2–5 ft (up to 1.5 ft above and below the source) and at horizontal distances of 0.25–2 m. We simultaneously measured real-time air speed, wind direction, relative humidity, and temperature at single points on the patio. The ground-level air speeds on the patio were similar to those we measured during a survey of 26 outdoor patio locations in 5 nearby towns. The CO data exhibited a well-defined proximity effect similar to the indoor proximity effect reported in the literature. Average concentrations were approximately inversely proportional to distance. Average CO levels were approximately proportional to source strength, supporting generalization of our results to different source strengths. For example, we predict a cigarette smoker would cause average fine particle levels of approximately 70–110 μg m^?3 at horizontal distances of 0.25–0.5 m. We also found that average CO concentrations rose significantly as average air speed decreased. We fit a multiplicative regression model to the empirical data that predicts outdoor concentrations as a function of source emission rate, source–receptor distance, air speed and wind direction. The model described the data reasonably well, accounting for ～50% of the log-CO variability in 5-min CO concentrations.     

Updating the conceptual model for fine particle mass emissions from combustion systems

Atmospheric transformations determine the contribution of emissions from combustion systems to fine particulate matter (PM) mass. For example, combustion systems emit vapors that condense onto existing particles or form new particles as the emissions are cooled and diluted. Upon entering the atmosphere, emissions are exposed to atmospheric oxidants and sunlight, which causes them to evolve chemically and physically, generating secondary PM. This review discusses these transformations, focusing on organic PM. Organic PM emissions are semi-volatile at atmospheric conditions and thus their partitioning varies continuously with changing temperature and concentration. Because organics contribute a large portion of the PM mass emitted by most combustion sources, these emissions cannot be represented using a traditional, static emission factor. Instead, knowledge of the volatility distribution of emissions is required to explicitly account for changes in gas-particle partitioning. This requires updating how PM emissions from combustion systems are measured and simulated from combustion systems. Secondary PM production often greatly exceeds the direct or primary PM emissions; therefore, secondary PM must be included in any assessment of the contribution of combustion systems to ambient PM concentrations. Low-volatility organic vapors emitted by combustion systems appear to be very important secondary PM precursors that are poorly accounted for in inventories and models. The review concludes by discussing the implications that the dynamic nature of these PM emissions have on source testing for emission inventory development and regulatory purposes. This discussion highlights important linkages between primary and secondary PM, which could lead to simplified certification test procedures while capturing the emission components that contribute most to atmospheric PM mass.     

Chronic toxicity of tributyltin to development and reproduction of the European freshwater snail Lymnaea stagnalis (L.)

Chronic toxicity, growth and reproduction were measured in the freshwater gastropod Lymnaea stagnalis exposed to waterborne bis(tri-n-butyltin) oxide (TBTO) over a range of four nominal concentrations (0-10microg TBTl(-1)). Egg development was completely inhibited at 10microg TBTl(-1), whilst abnormal embryonic development was observed at 1microg TBTl(-1). For the solvent control and the 0.01microg TBTl(-1)treatment group, normal development of L. stagnalis was observed. Survivorship of hatchlings was significantly reduced by TBT at 1microgl(-1) while inhibition of shell growth of L. stagnalis was also observed at this concentration. The data were used to determine intrinsic growth rates (r) using two theoretical approaches (the Euler-Lotka equation and a Leslie Matrix). Both approaches showed that survival, fecundity and population growth rate were reduced at 1microg TBTl(-1). Interestingly, at 0.01microg TBTl(-1) snails showed a higher fecundity and growth rate than in the solvent control. The TBT concentration at which the r would equal zero (ECr(0)) and the population NOEC (No Observed Effect Concentration) were estimated. The population NOEC was defined as either the lower 95% confidence or lower 95% pointwise percentile limit of the ECr(0). Values obtained using the two different approaches were similar and thus a geometric mean was calculated to obtain a final representative population NOEC value for L. stagnalis of 2745ng TBTl(-1). The present data together with chronic toxicity TBT data for freshwater organisms, obtained from peer-reviewed literature, were used to construct a species sensitivity distribution (SSD). A predicted no effect concentration was then derived from the SSD (hazardous concentration at 5%, i.e., HC5 or 95% protection level). This SSD was compared with the SSD derived from saltwater species datasets. The HC5 value for saltwater species (3.55ng TBTl(-1); lower confidence limit: 1.93ng TBTl(-1)) was significantly lower than that for freshwater species (30.13ng TBTl(-1); lower confidence limit: 9.23ng TBTl(-1)), indicating that saltwater species are probably more susceptible to TBT than their freshwater counterparts.     

Highway runoff quality in Ireland

Highway runoff has been identified as a significant source of contaminants that impact on the receiving aquatic environment. Several studies have been completed documenting the characteristics of highway runoff and its implication to the receiving water in the UK and elsewhere. However, very little information is available for Ireland. The objective of this study was to determine the quality of highway runoff from major Irish roads under the current road drainage design and maintenance practice. Four sites were selected from the M4 and the M7 motorways outside Dublin. Automatic samplers and continuous monitoring devices were deployed to sample and monitor the runoff quality and quantity. More than 42 storm events were sampled and analysed for the heavy metals Cd, Cu, Pb, and Zn, 16 US EPA specified PAHs, volatile organic compounds including MTBE, and a number of conventional pollutants. All samples were analysed based on the Standard Methods. Significant quantities of solids and heavy metals were detected at all sites. PAHs were not detected very often, but when detected the values were different from quantities observed in UK highways. The heavy metal concentrations were strongly related to the total suspended solids concentrations, which has a useful implication for runoff management strategies. No strong relationship was discovered between pollutant concentrations and event characteristics such as rainfall intensity, antecedent dry days (ADD), or rainfall depth (volume). This study has demonstrated that runoff from Irish motorways was not any cleaner than in the UK although the traffic volume at the monitored sites was relatively smaller. This calls for a site specific investigation of highway runoff quality before adopting a given management strategy.