Dioxin contamination in soils of Southern Vietnam

Dioxin is the common name for polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), and is abbreviated as PCDD/Fs. In the case of Southern Vietnam, is of high concern dioxin contamination in the areas affected by past-use chemical defoliants. Our study related to the zone considered as a "hot spot"--Bien Hoa Airbase and surrounding areas (Bien Hung Lake). Although the war ended over 30 years ago, the adverse effects on this territory still continue. Soil and sediment were selected for our research as they act as a sink for PCDD/Fs. The samples were taken and analyzed in CECOTOX laboratory following certified procedures. The total amounts of PCDD/Fs (2,3,7,8 related congeners) in the samples were converted into WHO-TEQ and compared with standard values proposed by Canadian environmental quality guidelines. The obtained data shows a relatively high risk (up to 20.4 times higher than (probable effect level) PEL value for sediment and 46 times higher than standard value for soil). The research is continuing on the assessment of dioxin transport in food chain. Moreover, considering the obtained data a complete solution should be found urgently to solve the problem of dioxin contamination in the studied areas.     

Arsenic in groundwater and sediment in the Mekong River delta, Vietnam

A study of groundwater and sediment during 2007-2008 in the Mekong River delta in Vietnam (MDVN) revealed that 26%, 74%, and 50% of groundwater samples were above the US EPA drinking water guidelines for As (10 μg/L), Mn (0.05 mg/L), and Fe (0.3 mg/L). The range of As, Fe, and Mn concentrations in the MDVN were <0.1-1351 μg/L, <0.01-38 mg/L, and <0.01−14 mg/L, respectively. Elevated levels of As were found in groundwater at sampling sites close to the Mekong River and in wells less than 60−70 m deep. An inverse relationship was found between As and Mn concentrations in groundwater. Sediment samples from An Giang and Dong Thap had the highest As concentrations (18 mg/kg and 38 mg/kg, respectively). Arsenic sediment occurred mainly in the poorly crystalline Fe oxide phases. Reductive dissolution of the Fe oxide phase is not necessarily the dominant mechanism of As release to groundwater.     

Amine volatility in CO2 capture

Amine volatility is a key screening criterion for amines to be used in CO₂ capture. Excessive volatility may result in significant economic losses and environmental impact. It also dictates the capital cost of the water wash. This paper reports measured amine volatility in 7 m MEA (monoethanolamine), 8 m PZ (piperazine), 7 m MDEA (n-methyldiethanolamine)/2 m PZ (piperazine), 12 m EDA (ethylenediamine), and 5 m AMP (2-amino-2-methyl-1-propanol) at 40–60 °C with lean and rich loadings giving CO₂ partial pressures of 0.5 and 5 kPa at 40 °C. The amine concentrations were chosen to maximize CO₂ capture capacity at acceptable viscosity. At the lean loading condition (where volatility is of greatest interest), the amines are ranked in order of increasing volatility: 7 m MDEA/2 m PZ (6/2 ppm), 8 m PZ (8 ppm), 12 m EDA (9 ppm), 7 m MEA (31 ppm), and 5 m AMP (112 ppm). The apparent amine partial molar excess enthalpies in these systems were estimated to range from ～10 to 87 kJ/mol of amine.     

Estimation of Nitrogen and Phosphorus in Effluent from the Striped Catfish Farming Sector in the Mekong Delta,Vietnam

In this study an attempt is made to estimate nitrogen and phosphorus discharged to the environment from the striped catfish (Pangasianodon hypophthalmus) farming sector in the Mekong Delta (8°33′–10°55′N, 104°30′–106°50′E), South Vietnam. The sector accounted for 687,000 t production in 2007 and 1,094,879 t in 2008, with over 95% of the produce destined for export to over 100 countries. Commercial and farm-made feeds are used in catfish farming, currently the former being more predominant. Nitrogen discharge levels were similar for commercial feeds (median 46.0 kg/t fish) and farm-made feeds (median 46.8 kg/t fish); whilst, phosphorus discharge levels for commercial feeds (median 14.4 kg/t fish) were considerably lower than for farm-made feeds (median 18.4 kg/t fish). Based on the median nutrient discharge levels for commercial feeds, striped catfish production in the Mekong Delta discharged 31,602 t N and 9,893 t P, and 50,364 t N and 15,766 t P in 2007 and 2008, respectively. However, the amount of nutrients returned directly to the Mekong River may be substantially less than this as a significant proportion of the water used for catfish farming as well as the sludge is diverted to other agricultural farming systems. Striped catfish farming in the Mekong Delta compared favourably with other cultured species, irrespective of the type of feed used, when the total amounts of N and P discharged in the production of a tonne of production was estimated.     

Environmental regulatory failure and metal contamination at the Giap Lai pyrite mine, Northern Vietnam

The causes for the failure in enforcement of environmental regulations at the Giap Lai pyrite mine in northern Vietnam are considered and the environmental impacts that are associated with this mine are evaluated. It is shown that sulphide-rich tailings and waste rock in the mining area represent significant sources of acid rock drainage (ARD). The ARD is causing elevated metal levels in downstream water bodies, which in turn, represent a threat to both human health and to aquatic ecosystems. Metal concentrations in impacted surface waters have increased after mine closure, suggesting that impacts are becoming progressively more serious. No post-closure, remediation measures have been applied at the mine, in spite of the existence of environmental legislation and both central and regional institutions charged with environmental supervision and control. The research presented here provides further emphasis for the recommendation that, while government institutions may need to be strengthened, and environmental regulations need to be in place, true on the ground improvement in environmental quality in Vietnam and in many other developing countries require an increased focus on promoting public awareness of industrial environmental issues.     

Mercury in air in an area impacted by strong industrial activities

The concentrations of total gaseous mercury (TGM) and its relevant environmental parameters were measured at a highly industrialized area in the Ban Wall industrial complex (BWIC) in An San city, Korea from March to May 2005. The mean concentrations of Hg measured during the entire study period were computed to be 6.32 ± 8.56 ng m⁻³ (range of 2.32–181 ng m⁻³; N = 1160). Due to the effects of strong man-made activities, the significantly high Hg concentration levels (e.g., at or above 10 ng m⁻³) comprised about 7.5% of all data with the mean of 21.8 ± 26.3 ng m⁻³ (N = 87). By separating the data into daytime and nighttime periods, the Hg values exhibited a notable daytime enhancement possibly due to strong man-made activities during working hours. The results of the correlation analysis indicated the possible relationship between the Hg concentration and the temperature as well as several pollutant species (e.g., NO₂ and NO_x). Evaluation of the Hg data in relation with the air mass transport pattern confirms that the Hg concentration levels in this industrial area are affected most eminently by local, rather than distant, pollution sources.     

Response surface method for modeling the removal of carbon dioxide from a simulated gas using water absorption enhanced with a liquid-film-forming device

This paper presents the results from using a physical absorption process to absorb gaseous CO_2mixed with N_2using water by producing tiny bubbles via a liquid-film-forming device(LFFD)that improves the solubility of CO_2in water.The influence of various parameters—pressure,initial CO_2concentration,gas-to-liquid ratios,and temperature—on the CO_2removal efficiency and its absorption rate in water were investigated and estimated thoroughly by statistical polynomial models obtained by the utilization of the response surface method(RSM)with a central composite design(CCD).Based on the analysis,a high efficiency of CO_2capture can be reached in conditions such as low pressure,high CO_2concentration at the inlet,low gas/liquid ratio,and low temperature.For instance,the highest removal efficiency in the RSM–CCD experimental matrix of nearly 80%occurred for run number 20,which was conducted at 0.30 MPa,CO_2concentration of 35%,gas/liquid ratio of 0.71,and temperature of 15°C.Furthermore,the coefficients of determination,R~2,were 0.996 for the removal rate and 0.982 for the absorption rate,implying that the predicted values computed by the constructed models correlate strongly and fit well with the experimental values.The results obtained provide essential information for implementing this method properly and effectively and contribute a promising approach to the problem of CO_2capture in air pollution treatment.     

Relationship between types of urban forest and PM2.5 capture at three growth stages of leaves

Particulate matter diameter ≤ 2.5 μm (PM_2.5) causes direct harm to human health. Finding forms of urban forest systems that with the ability to reduce the amount of particulate matter in air effectively is the aim of this study. Five commonly cultivated kinds of urban forest types were studied in Beijing city at three stages of leaf growth. Results show that the urban forest system is capable of storing and capturing dust from the air. The types of shrubs and broadleaf trees that have the ability to capture PM_2.5 from the air are most effective when leaves have fully developed. In the leafless season, the conifer and mixed tree types are the most effective in removing dust from the air. For all kinds of forest types and stages of leaf growth, the PM_2.5 concentration is highest in the morning but lower in the afternoon and evening. Grassland cannot control particles suspended in the air, but can reduce dust pollution caused by dust from the ground blown by the wind back into the air.     

“一带一路”沿线国家PM2.5污染与人口暴露风险的时空分布特征

使用1999—2016年0.01°×0.01°高空间分辨率的卫星反演PM_2.5浓度数据集，结合精度为1 km×1 km的人口栅格数据，分析了"一带一路"沿线65个国家PM_2.5污染与暴露风险的时空变化特征.结果表明：①PM_2.5浓度存在着明显的区域分布差异，PM_2.5浓度高值区（>35 μg·m^-3）主要分布在地形平坦、人口密集的恒河平原、华北平原和中南半岛等区域，中值区（10~35 μg·m^-3）主要集中在俄罗斯西部、中东欧、沙特东部和缅甸等区域，而低值区（<10 μg·m^-3）主要分布在高海拔、高纬度与荒漠化地区，如青藏高原、西伯利亚、西亚卢特沙漠等区域；②65国年均PM_2.5浓度从1999年的12.0 μg·m^-3上升到2016年的14.1 μg·m^-3，年均增长超过0.1 μg·m^-3，累计有22.5%的区域有显著的增加趋势，仅有5.2%的区域呈显著下降趋势；③2000—2016年，PM_2.5浓度在35 μg·m^-3以上的区域面积比重从2.2%上升到7.2%，暴露人口占比从18.9%增加至41.9%；④人口暴露风险平均值从2000年的665.2增加至2016年的1140.4，Hurst总体均值为0.59，其中大于0.5的持续性区域占82.3%，持续性特征以弱持续性为主.