Micromorphology and chemistry of airborne particles in Brussels during agriculture working periods in surrounding region

The main objective of our research was to compare the airborne particle micromorphology and chemistry in the Brussels environment during agriculture working periods in the surrounding farming region. We used specific methods and instrumentation that are adapted to the climate peculiarities of the Brussels region, the period of investigations (12 months) and the proposed objectives. For the agricultural works we defined the following six periods: before sowing, sowing, after sowing, before harvest, harvest and after harvest. The results indicate a possible temporal correlation between agricultural work periods and airborne particle concentration, micromorphology and chemistry in the Brabant-Brussels region. For wheat and corn plant-growth periods, the average particle size, defined as the area obtained by a planar projection of the particulate, showed important variations in time. For sugar beet and endive, the average area size variations are less important. The roughness and sphericity parameters for the growth periods of the four different plants also showed significant differences. Many of the larger particulates (> 10 microm) are aggregates of even finer particles coated with many still finer ones. The airborne particle chemistry averages (atomic percentage At%), showed that three constituents (Si, S and Fe) dominate all the samples (except for particles 3-10 microm in size, which contain a relatively large percentage of Al). Applying similar investigation methods to study the correlations between airborne particle dynamics in urban zones and the agriculture working periods in their surrounding regions could be of interest to better understand the complexity of the PM problematic.     

Is PM10 mass measurement a reliable index for air quality assessment? An environmental study in a geographical area of north-eastern Italy

The aim of this study was to measure the concentration of some metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Ti) in PM(10) samples collected in one urban and one industrial site and to assess that PM(10) total mass measurement may be not sufficient as air quality index due to its complex composition. Metals were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and differential pulsed anodic stripping voltammetry (DPASV). The measured concentrations were used to calculate the content of metals in the PM(10) total mass, and to estimate the enrichment factors and the correlations between PM(10), metal concentrations and meteorological data for the two sites. The mean PM10 concentration during the sampling period in the urban site exceeded the annual European Union (EU) standard (40 microg/m(3)) and, for some sampling days, the daily EU standard (50 microg/m(3)) was also exceeded. In opposite, both EU standards were never exceeded in the industrial site. The overall metal content was nearly double in the industrial site compared to the urban one, and the mean Ni concentration exceeded the EU annual limit value (10 ng/m(3)). The metals with the highest enrichment factor were Cd, Cu, Ni and Pb for both sites, suggesting a dominant anthropogenic source for these metals. Metal concentrations were very low and typical of rural background during Christmas holidays, when factories were closed. PM(10) total mass measurement is not a sufficient air quality index since the metal content of PM(10) is not related to its total mass, especially in sites with industrial activities. This measurement should be associated with the analysis of toxic metals.     

Environmental impact of coal washery and Damodar River water on the morphometry and biochemical changes of maize (Zea mays L.) and soil health

Enormous quantity of water is used for coal beneficiation and accordingly huge amount of effluents are being generated. In this study an attempt was made to evaluate the potential of this effluent water for irrigation. Water samples were collected from three different points (a) feeding point, (b) thickening point, and (c) outlet point of coal washery, and from Damodar River for monitoring the water quality. The samples were analyzed for various parameters and compared with prescribed standard, which revealed that the total suspended solids of thickening point and Damodar River were higher. A pot experiment with maize was conducted to study the suitability of this coal washery water for irrigation. Pots were irrigated with water from the three points of washery and Damodar River in two concentrations (100% and 50% dilution with distilled water); pure distilled water was used for control. There was 100% germination in all the treatments. The plant growth, chlorophyll content and soil quality parameters were significantly better in washery and Damodar River water treated pots. The Damodar River water and washery water from feeding and outlet point could be successfully used for irrigation. In general mixing with good quality water has shown better results.     

Carbon Monoxide Concentration in a Street Canyon of Buenos Aires City (Argentina)

The analysis of three years of 8-h CO concentration values registered in a deep street canyon downtown shows high frequency of values that exceed WHO health protection guidelines. An inverse relationship between opposing percentiles of the distributions of CO concentrations and mean wind speed could be found. Data also showed a variation of mean CO values with prevailing wind direction. The averaged concentration value obtained when the sampler probe is on the leeward side is lower than the obtained when it is on the windward wall. A preliminary explanation of this feature may be related to the advection of polluted air from a high traffic density area nearby.     

Responses of Physical, Chemical, and Biological Indicators of Water Quality to a Gradient of Agricultural Land Use in the Yakima River Basin, Washington

The condition of 25 stream sites in the Yakima River Basin, Washington, were assessed by the U.S. Geological Survey's National Water-Quality Assessment Program. Multimetric condition indices were developed and used to rank sites on the basis of physical, chemical, and biological characteristics. These indices showed that sites in the Cascades and Eastern Cascades ecoregions were largely unimpaired. In contrast, all but two sites in the Columbia Basin ecoregion were impaired, some severely. Agriculture (nutrients and pesticides) was the primary factor associated with impairment and all impaired sites were characterized by multiple indicators of impairment. All indices of biological condition (fish, invertebrates, and algae) declined as agricultural intensity increased. The response exhibited by invertebrates and algae suggested a threshold response with conditions declining precipitously at relatively low levels of agricultural intensity and little response at moderate to high levels of agricultural intensity. This pattern of response suggests that the success of mitigation will vary depending upon where on the response curve the mitigation is undertaken. Because the form of the community condition response is critical to effective water-quality management, the National Water-Quality Assessment Program is conducting studies to examine the response of biota to gradients of land-use intensity and the relevance of these responses to water-quality management. These land-use gradient pilot studies will be conducted in several urban areas starting in 1999.     

Accumulation of Heavy Metals in Epiphytic Lichens Near a Municipal Solid Waste Incinerator (Central Italy)

The epiphytic lichen Parmelia caperata was usedas biomonitor in the area of a municipal solid wasteincinerator (Poggibonsi, central Italy) to investigatethe levels and the spatial distribution of the heavymetals Al, Cd, Cr, Cu, Fe, Hg, Pb and Zn. Levels ofAl, Cu and Hg were similar to those in unpollutedareas, whereas high values were found for Cr, Zn andespecially Cd. The distribution pattern of the lastthree metals and the exponential relationship of theirconcentrations with distance from the incinerator,showed that the disposal plant is a local source ofatmospheric pollution due to Cd, Cr and Zn. For thesemetals, long-term hazard should be seriously taken into account.     

A Framework for Comprehensive,Integrated, Watershed Monitoring in New York City

The International Life SciencesInstitute (ILSI) Risk Science Institute (RSI) convenedan expert panel of scientists to developrecommendations for a comprehensive monitoring programfor the Croton and Catskill/Delaware watersheds, whichprovide drinking water to New York City's residents. This effort was conducted as part of efforts topreserve and enhance the quality of New York City'sreservoir system through a watershed protectionprogram. The panel developed recommendations for astrategic framework on which to construct a monitoringprogram. As part of this activity, the paneldetermined whether existing monitoring activities weredeficient and, where activities were deficient, thepanel developed recommendations for additionalinformation that should be collected.The panel recommended the development and use of anintegrated approach to watershed monitoring, whichdraws on modeling, risk-based planning and analysis,statistical sampling and design, and basic compliancemonitoring. The approach should be designed toprovide an assessment of natural and anthropogenicsources of stress to the system as well as anassessment of water quality trends in response tostresses acting in concert, both over the long termand over the five-year New York City Memorandum ofAgreement (MOA) assessment time frame. It should alsoprovide an assessment of the human health andenvironmental risks posed by a variety of stressors,and the impact of management actions implemented toameliorate stressors.     

Determination of toxic elements in waters and sediments from River Subin in the Ashanti Region of Ghana

Waters and sediments of Subin River, which flows through the industrial and commercial areas of Kumasi in the Ashanti region of Ghana, were geochemically investigated to ascertain heavy metal pollution levels due to anthropogenic activities. The study shows preoccupying pollution levels that constitute a threat to public and ecological systems. The waters of Subin River are neutral to slightly basic, inferred from pH values of 6.89–7.65). Electric conductivity (EC) of the waters ranges from 822 to 1,821 μs/cm and the range of total dissolved solids (TDS) is from 409 to 913 mg/l. Toxic elements contents of sediments and waters from 10 sites along the river were analysed by instrumental neutron activation analysis (INAA), and Al, As, Cd, Cr, Cu and Zn were determined. The concentrations of Al, As, Cd, Cr, Cu and Zn in the waters range between 4.02–15.18, 0.007–0.16, 0.002–0.05, 0.001–0.019, 1.32–7.04 and 4.28–10.2 mg/l, respectively. The contamination factors (CF) computed for the elements indicate that with the exception of sampling site S10, the sediments are polluted with Cd. Chromium contamination in the sediments is observed at S6 and S7, where the CF values were 1.39 and 1.52, respectively. The pollution load indices (PLI) were low (<1) and ranged from 0.14 to 0.75, suggesting that the overall sediment column of the river is not polluted.     

Wet weather impact on trihalomethane formation potential in tributaries to drinking water reservoirs

During rain storm events, land surface runoff and resuspension of bottom sediments cause an increase in Trihalomethane (THM) precursors in rivers. These precursors, when chlorinated at water treatment facilities will lead to the formation of THMs and hence impact drinking water resources. In order to evaluate the wet weather impact on the potential formation of THMs, river samples were collected before, during and after three rain storms ranging from 15.2 to 24.9 mm precipitation. The samples were tested for THM formation potential and other indicators including UV254 absorbance, turbidity and volatile suspended solid (VSS). Average levels of THMs increased from 61 μg/l during dry weather to 131 μg/l during wet weather, and then went back to 81 μg/l after rain ended. Wet weather values of THM are well above the maximum contaminant level (MCL) 80 μg/l, set by EPA for drinking water. THM indicators also exhibited similar trends. Average levels increased from 0.6 to 1.8 abs; 2.6 to 6 ntu; and 7.5 to 15 mg/l respectively for UV254, turbidity and VSS. A positive correlation was observed between THM formation and THM indicators. The t-test of significance (p-value) was less than 0.05 for all indicators, and R values ranged from 0.85 to 0.92 between THMs and the indicators, and 0.72 to 0.9 among indicators themselves.     

Indoor and outdoor PM mass and number concentrations at schools in the Athens area

Simultaneous indoor and outdoor PM₁₀ and PM_2.5 concentration measurements were conducted in seven primary schools in the Athens area. Both gravimetric samplers and continuous monitors were used. Filters were subsequently analyzed for anion species. Moreover ultrafine particles number concentration was monitored continuously indoors and outdoors. Mean 8-hr PM₁₀ concentration was measured equal to 229 ± 182 μg/m³ indoors and 166 ± 133 μg/m³ outdoors. The respective PM_2.5 concentrations were 82 ± 56 μg/m³ indoors and 56 ± 26 μg/m³ outdoors. Ultrafine particles 8-h mean number concentration was measured equal to 24,000 ± 17,900 particles/cm³ indoors and 32,000 ± 14,200 particles/cm³ outdoors. PM₁₀ outdoor concentrations exhibited a greater spatial variability than the corresponding PM_2.5 ones. I/O ratios were close or above 1.00 for PM₁₀ and PM_2.5 and smaller than 1.00 for ultrafine particles. Very high I/O ratios were observed when intense activities took place. The initial results of the chemical analysis showed that accounts for the 6.6 ± 3.5% of the PM₁₀ and for the 3.1 ± 1.4%.The corresponding results for PM_2.5 are 12.0 ± 7.7% for and 3.1 ± 1.9% for . PM_2.5 indoor concentrations were highly correlated with outdoor ones and the regression line had the largest slope and a very low intercept, indicative of no indoor sources of fine particulate . The results of the statistical analysis of indoor and outdoor concentration data support the use of as a proper surrogate for indoor PM of outdoor origin.