Linking Hydrogeological and Ecological Tools for an Integrated River Catchment Assessment

Ecological (biological and hydrochemical assessment) and hydrogeological (vulnerability and pollution risk mapping) tools have been combined to assess the ecological quality and hydrogeological vulnerability of an agricultural river basin. In addition, the applicability of the recently developed vulnerability assessment approach (COP method) in the particular environmental conditions was tested by comparing its results with hydroecological assessment tools (i.e., pollution metrics). Five sampling sites were selected and sampled for benthic macroinvertebrates and physicochemical variables during summer and spring. Overall, sites ranged from moderate to poor ecological quality. The results illustrated that 26% of the study area was of moderate pollution risk, while 65% was classified as of low and very low risk zones. However, the higher elevation zones where calcareous rock formations are encountered presented moderate to high pollution risk that was accredited by the ecological quality assessment. Pollution metrics facilitated from hydrochemical analysis indicated a significant association with groundwater vulnerability, thus validating vulnerability and risk estimations. This study indicated that the particular groundwater pollution risk mapping methodology and the water quality assessment indices can be well combined to provide an integrated evaluation tool at a catchment scale.     

Organochlorine and mercury contamination in fish tissues from the River Nestos, Greece

Polychlorinated biphenyls (PCBs), hexachlorocyclohexane (HCH) isomers, dichlorodiphenyltrichloroethane (DDT) and its metabolites, other organochlorine pesticides such as hexachlorobenzene (HCB), chlordane compounds (CHLs, including trans-chlordane and cis- and trans-nonachlor) and the heavy metal mercury were quantified in muscle and liver of the European chub (Leuciscus cephalus, Linnaeus, 1758) and in the muscle of the barbel (Barbus cyclolepis, Heckel, 1837) at two sampling sites of the River Nestos, Greece. PCBs in muscle and DDTs in the liver tissues were the predominant organochlorinated contaminants. Among the PCBs, congeners 47 (up to 9.60 ng g(-1) wet wt.), 180 (up to 1.15 ng g(-1) wet wt.) and 190 (up to 1.50 ng g(-1) wet wt.) were the most frequent and abundant. The contamination degree by the sum of PCBs on the fish tissue samples from the River Nestos is lower or similar to PCB levels found in other ecosystems. Among the organochlorine pesticides, essentially only p,p'-DDD, p,p'-DDE and alpha-, beta- and gamma-HCH were found, with the former appearing at mean levels up to 30.71 ng g(-1) wet wt. From a public health standpoint, residue organochlorine pesticide levels from our work are considerably lower than the recommended tolerance limits. Finally, mean values of Hg in chub were significant lower (up to 31.04 ng g(-1) wet wt.) compared to those detected on barbel (up to 169.27 ng g(-1) wet wt.). The concentrations of Hg in fresh water fish from the River Nestos did not exceed WHO and US EPA health guidelines, and were suitable for human consumption.     

The potential for aeration of MSW landfills to accelerate completion

Landfilling is a popular waste disposal method, but, as it is practised currently, it is fundamentally unsustainable. The low short-term financial costs belie the potential long-term environmental costs, and traditional landfill sites require long-term management in order to mitigate any possible environmental damage. Old landfill sites might require aftercare for decades or even centuries, and in some cases remediation may be necessary. Biological stabilisation of a landfill is the key issue; completion criteria provide a yardstick by which the success of any new technology may be measured. In order for a site to achieve completion it must pose no risk to human health or the environment, meaning that attenuation of any emissions from the site must occur within the local environment without causing harm. Remediation of old landfill sites by aerating the waste has been undertaken in Germany, the United States, Italy and The Netherlands, with considerable success. At a pilot scale, aeration has also been used in newly emplaced waste to accelerate stabilisation. This paper reviews the use of aerobic landfill worldwide, and assesses the ways in which the use of aerobic landfill techniques can decrease the risks associated with current landfill practices, making landfill a more sustainable waste disposal option. It focuses on assessing ways to utilise aeration to enhance stabilisation. The results demonstrated that aeration of old landfill sites may be an efficient and cost-effective method of remediation and allow the date of completion to be brought forward by decades. Similarly, aeration of newly emplaced waste can be effective in enhancing degradation, assisting with completion and reducing environmental risks. However, further research is required to establish what procedure for adding air to a landfill would be most suitable for the UK and to investigate new risks that may arise, such as the possible emission of non-methane organic compounds.     

Key parameters and practices controlling pesticide degradation efficiency of biobed substrates

We studied the contribution of each of the components of a compost-based biomixture (BX), commonly used in Europe, on pesticide degradation. The impact of other key parameters including pesticide dose, temperature and repeated applications on the degradation of eight pesticides, applied as a mixture, in a BX and a peat-based biomixture (OBX) was compared and contrasted to their degradation in soil. Incubation studies showed that straw was essential in maintaining a high pesticide degradation capacity of the biomixture, whereas compost, when mixed with soil, retarded pesticide degradation. The highest rates of degradation were shown in the biomixture composed of soil/compost/straw suggesting that all three components are essential for maximum biobed performance. Increasing doses prolonged the persistence of most pesticides with biomixtures showing a higher tolerance to high pesticide dose levels compared to soil. Increasing the incubation temperature from 15 °C to 25 °C resulted in lower t(1/2) values, with biomixtures performing better than soil at the lower temperature. Repeated applications led to a decrease in the degradation rates of most pesticides in all the substrates, with the exception of iprodione and metalaxyl. Overall, our results stress the ability of biomixtures to perform better than soil under unfavorable conditions and extreme pesticide dose levels.     

Aerobic biodegradation of organotin compounds in activated sludge batch reactors

The biodegradation behavior of four organotin (OT) compounds, namely tributyltin (TBT), dibutyltin (DBT), monobutyltin (MBT) and triphenyltin (TPhT), was studied in lab-scale activated sludge batch reactors. The activated sludge was spiked with the OT compounds at a level of 100 microg l(-1) as Sn. Determination of the OT compounds by GC-FPD after ethylation in the dissolved and particulate phase revealed that 24 h after the start of the experiments, almost the total of OT compounds has been removed from the dissolved phase and is associated with the suspended solids. Calculation of mass balance in batch reactors showed that OT compounds biodegradation was performed via a sequential dealkylation process. Removals due to biodegradation were differentiated according to the parent compound. In experiments with non-acclimatized biomass, a percentage of 27.1, 8.3, 73.8 and 51.3 was still present as TBT, DBT, MBT and TPhT, respectively, at the end of the experiment (18th day). Half-lives (t1/2) of 10.2 and 5.1 days were calculated for TBT and DBT, respectively, whereas apparent t1/2 values could not be determined for MBT and TPhT (t1/2>18 days). The capacity of activated sludge to biodegrade OT compounds in the absence of supplemental substrate indicated that these compounds can be metabolized as single sources of carbon and energy in activated sludge systems. Excluding TBT, the presence of low concentrations of supplemental substrate did not affect the biodegradation potential of activated sludge. The acclimatization of biomass on OT compounds enhanced significantly biodegradation, resulting in significant decreases of half-lives of OT compounds. As a result in the presence of acclimatized biomass, half-lives of 1.4, 3.6, 9.8 and 5.0 days were calculated for TBT, DBT, MBT and TPhT, respectively.     

A multicriteria-based methodology for site prioritisation in sediment management

Decision-making for sediment management is a complex task that incorporates the selections of areas for remediation and the assessment of options for any mitigation required. The application of Multicriteria Analysis (MCA) to rank different areas, according to their need for sediment management, provides a great opportunity for prioritisation, a first step in an integrated methodology that finally aims to assess and select suitable alternatives for managing the identified priority sites. This paper develops a methodology that starts with the delimitation of management units within areas of study, followed by the application of MCA methods that allows ranking of these management units, according to their need for remediation. This proposed process considers not only scientific evidence on sediment quality, but also other relevant aspects such as social and economic criteria associated with such decisions. This methodology is illustrated with its application to the case study area of the Bay of Santander, in northern Spain, highlighting some of the implications of utilising different MCA methods in the process. It also uses site-specific data to assess the subjectivity in the decision-making process, mainly reflected through the assignment of the criteria weights and uncertainties in the criteria scores. Analysis of the sensitivity of the results to these factors is used as a way to assess the stability and robustness of the ranking as a first step of the sediment management decision-making process.     

Comparison of bioluminescence and nitrification inhibition methods for assessing toxicity to municipal activated sludge

The aim of this study was to compare two alternative toxicity assessment methods to determine wastewater toxicity and predict treatment plant process upsets. The toxicity of two synthetic organic compounds (triclosan and 4-n-nonylphenol), which are commonly detected in municipal wastewater, and municipal and industrial wastewaters with different heavy metals content were evaluated by the nitrification inhibition assay and bioluminescence toxicity test. Comparison between both assays confirmed that Vibrio fischeri is generally more sensitive than autotrophic bacteria, and, if not calibrated, the bioluminescence method tends to overestimate toxic effects on activated sludge biomass. The nitrification inhibition assay appears to predict plant process upsets more accurately. Both methods showed a significant toxicity decrease through treatment that could be partially attributed to the significant heavy metals removal obtained by primary and secondary treatment. A good correlation for the two assays was obtained, as indicated by a high correlation coefficient (r2 = 0.80).     

Should the fashion industry confront the sustainability challenge with 3D prototyping technology

Abstract

In this paper, coming out of a broader research project on how the digital prototype can be effectively integrated in the product development process of the clothing industry, the authors investigate the relationship between Corporate Social Responsibility (CSR) and Collective Actions on Sustainability and the environmental impact of the new model of fast and accelerating fashion. Extensive research was contacted with personal interviews and analysed primary data shows how new technology solutions like Product Lifecycle Management (PLM), 3D visualisation or 3D prototyping can work with and across supply chain partners to reduce the environmental footprint of their processes. The final phase of the paper involves the conceptualisation of a new apparel product development model, encompassing various digital tools which aim at addressing fit problems, extending the useful life of clothes and reducing the environmental impact of clothing in use through design and services.     

Predicting photochemical pollution in an industrial area

In order to confront pollution events concerning the city of Elefsis, in the environmentally aggravated area of Thriassion Plain, an effort is undertaken to create a model forecasting maximal daily concentrations of NO(x) (NO(2)+NO), NO(2) and O(3). The data analyzed were obtained from the Bureau of Pollution Control and Environments Quality based in Elefsis. The model in question uses hourly values of the pollutants as well as meteorological data recorded at the center of the city of Elefsis from 1993 to 1999. Three fitting methods are utilized, namely ordinary least squares, piecewise, and quantile regression. The verification and reliability of the forecasting models are based on the measurements of the year 2000. The results are considered to be satisfactory, with the forecasted values following the general tendencies.     

Groundwater hydrogeochemistry of Trikala municipality, central Greece

Sixty-four samples from the groundwater resources of Trikala municipality, central Greece, were collected during two periods (2006 and 2007) and analyzed for physico-chemical parameters (temperature, pH, specific electrical conductivity, and total dissolved solids), major ions (Ca²⁺, Cl^?, HCO ₃ ^? , K⁺, Mg²⁺, Na⁺, NO ₃ ^? , SO ₄ ^2? ), and several potentially toxic elements (Al, B, Ba, Br, Ca, Ce, Cl, Cr, Cu, Fe, K, La, Li, Mg, Mn, Mo, Na, Nd, Ni, P, Pb, Rb, S, Sc, Si, Sn, Sr, U, V, Y, Zn). European Council directives and USEPA guidelines were used to assess the water quality. The results indicate that all samples are fresh water, suitable for human consumption. All basic ions and physico-chemical parameters have average concentrations below their recommended optimum limits with the exception of electrical conductivity, for January 2007, and nitrate for October 2006 and January 2007 sampling periods. This exceedance is the result of dissolution of minerals such as calcite and dolomite that are present in the surrounding rocks and the application of fertilizers, respectively. Lead is the only element with an average value that exceeds the recommended EC guideline, while special attention should be paid to one borehole (T9) which has elevated NO ₃ ^? values which may pose a risk to human health.