Pharmaceuticals in the aquatic environment--a comparison of risk assessment strategies

The growing concern over the release of pharmaceutically active compounds and personal care products into the environment has prompted the introduction of risk assessment guidelines in both the European Union by the European Medicines Evaluation Agency (EMEA) and in the United States by the Food and Drug Administration (FDA), details of which are presented herein. Both employ a similar tiered system that compares the predicted environmental concentrations (PEC) with the worst-case no effect concentrations estimated from standard toxicity assays. These approaches are compared and contrasted. Results demonstrate room for improvement in areas such as the use of threshold values to trigger investigations, chronic and mechanism specific toxicity screening and mixture toxicity for which possible solutions are proposed.     

Chromium species behaviour in the activated sludge process

The purpose of this research was to compare trivalent chromium (Cr(III)) and hexavalent chromium (Cr(VI)) removal by activated sludge and to investigate whether Cr(VI) reduction and/or Cr(III) oxidation occurs in a wastewater treatment system. Chromium removal by sludge harvested from sequencing batch reactors, determined by a series of batch experiments, generally followed a Freundlich isotherm model. Almost 90% of Cr(III) was adsorbed on the suspended solids while the rest was precipitated at pH 7.0. On the contrary, removal of Cr(VI) was minor and did not exceed 15% in all experiments under the same conditions. Increase of sludge age reduces Cr(III) removal, possibly because of Cr(III) sorption on slime polymers. Moreover, the decrease of suspended solids concentration and the acclimatization of biomass to Cr(VI) reduced the removal efficiency of Cr(III). Batch experiments showed that Cr(III) cannot be oxidized to Cr(VI) by activated sludge. On the contrary, Cr(VI) reduction is possible and is affected mainly by the initial concentration of organic substrate, which acts as electron donor for Cr(VI) reduction. Initial organic substrate concentration equal to or higher than 1000 mgl(-1) chemical oxygen demand permitted the nearly complete reduction of 5 mgl(-1) Cr(VI) in a 24-h batch experiment. Moreover, higher Cr(VI) reduction rates were obtained with higher Cr(VI) initial concentrations, expressed in mg Cr(VI) g(-1) VSS, while decrease of suspended solids concentration enhanced the specific Cr(VI) reduction rate.     

Economic assessment of inherently safe membrane reactor technology options integrated into IGCC power plants

Pd/alloy-based (Pd/Cu, Pd/Au) membrane reactors embedded into Integrated Gasification Combined Cycle (IGCC) plants (IGCC-MR) enable the storage and/or use of the energy value of H₂ to produce electricity while the CO₂ enriched retentate exit stream becomes particularly suitable for high pressure CO₂ capture-sequestration. There is undoubtedly a lack of operating experience associated with IGCC-MR plants, and therefore, sound process intensification principles/practices should be followed not only to enhance process system performance but also to ensure process safety and economic feasibility of an IGCC-MR plant. Motivated by the above considerations, a comprehensive process economic assessment framework for an inherently safe membrane Pd/alloy-based reactor integrated into an IGCC plant is proposed. In particular, a detailed Net Present Value (NPV) model has been developed to evaluate the economic viability of an IGCC-MR plant where the membrane reactor module design conforms to basic inherent safety principles. Sources of irreducible uncertainty (market, regulatory and technological) are explicitly recognized such as the power plant capacity factor, Pd price, membrane life time and CO₂-taxes due to future regulatory action/policies. The effect of the above uncertainty drivers on the project's/plant's value is studied through Monte Carlo methods resulting in detailed NPV-distribution and process economic outcome profiles. The simulation results derived suggest that in the presence of (operational, economic and regulatory) uncertainties, inherently safe membrane reactor technology options integrated into IGCC plants could become economically viable. In particular, comparatively more attractive NPV distribution profiles are obtained when concrete safety risk-reducing measures are taken into account through pre-investment in process safety (equipment).     

Composition and production rate of medical waste from a small producer in Greece

The objective of this work was to determine the composition and production rate of medical waste from the health care facility of social insurance institute, a small waste producer in Xanthi, Greece. Specifically, produced medical waste from the clinical pathology (medical microbiology) laboratory, the X-ray laboratory and the surgery and injection therapy departments of the health facility was monitored for six working weeks. A total of 240 kg medical solid waste was manually separated and weighed and 330 L of liquid medical waste was measured and classified. The hazardous waste fraction (%w/w) of the medical solid waste was 91.6% for the clinical pathology laboratory, 12.9% for the X-ray laboratory, 24.2% for the surgery departments and 17.6% for the injection therapy department. The infectious waste fraction (%w/w) of the hazardous medical solid waste was 75.6% for the clinical pathology laboratory, 0% for the X-ray laboratory, 100% for the surgery departments and 75.6% for the injection therapy department. The total hazardous medical solid waste production rate was 64 ± 15 g/patient/d for the clinical pathology laboratory, 7.2 ± 1.6 g/patient/d for the X-ray laboratory, 8.3 ± 5.1 g/patient/d for the surgery departments and 24 ± 9 g/patient/d for the injection therapy department. Liquid waste was produced by the clinical pathology laboratory (infectious-and-toxic) and the X-ray laboratory (toxic). The production rate for the clinical pathology laboratory was 0.03 ± 0.003 L/patient/d and for the X-ray laboratory was 0.06 ± 0.006 L/patient/d. Due to the small amount produced, it was suggested that the most suitable management scheme would be to transport the hazardous medical waste, after source-separation, to the Prefectural Hospital of Xanthi to be treated with the hospital waste. Assuming this data is representative of other small medical facilities, medical waste production can be estimated for such facilities distributed around Greece.     

Cadmium levels in Europe: implications for human health

In this study we used the Forum of European Geological Surveys geochemical baseline data to examine the distribution of cadmium (Cd) in Europe, with a particular reference to the international soil and water guideline values. The highest cadmium levels were found to occur in topsoil and to follow closely the distribution of P₂O₅, suggesting that the contamination was from the use of rock phosphate fertilizer in intensive arable agriculture. In terms of human health impacts, food (up to several hundred μg/day) was found as the only major route of exposure to Cd for the non-smoking general population. It appeared that low levels of chronic exposure to Cd resulted in completely different human health impacts than those high levels that had caused the ‘itai–itai’ disease. Some correlations were suggested between cadmium levels and the age-adjusted prostate or breast cancer rates distributed in the European countries under study.     

Simulating regeneration and vegetation dynamics in Mediterranean coniferous forests

This study aims to provide a quantitative framework to model the dynamics of Mediterranean coniferous forests by integrating existing ecological data within a generic mathematical simulator. We developed an individual-based vegetation dynamics model, constrained on long-term field regeneration data, analyses of tree-rings and seed germination experiments. The simulator implements an asymmetric competition algorithm which is based on the location and size of each individual. Growth is parameterized through the analysis of tree-rings from more than thirty individuals of each of the three species of interest. A super-individual approach is implemented to simulate regeneration dynamics, constrained with available regeneration data across time-since-disturbance and light-availability gradients. The study concerns an insular population of an endemic to Greece Mediterranean fir (Abies cephalonica Loudon) on the island of Cephalonia (Ionian Sea) and two interacting populations of a Mediterranean pine (Pinus brutia Ten.) and a more temperate-oriented pine (Pinus nigra Arn. ssp. pallasiana) on the island of Lesbos (NE Aegean Sea), Greece. The model was validated against plot-level observations in terms of species standing biomass and regeneration vigour and adequately captured regeneration patterns and overall vegetation dynamics in both study sites. The potential effects of changing climatic patterns on the regeneration dynamics of the three species of interest were subsequently explored. With the assumption that a warmer future would probably cause changes in the duration of cold days, we tested how this change would affect the overall dynamics of the study sites, by focusing on the process of cold stratification upon seed germination. Following scenarios of a warmer future and under the current model parameterization, changes in the overall regeneration vigour controlled by a reduction in the amount of cold days, did not alter the overall dynamics in all plant populations studied. No changes were identified in the relative dominance of the interacting pine populations on Lesbos, while the observed reduction in the amount of emerging seedlings of A. cephalonica on Cephalonia did not affect biomass yield at later stages of stand development.     

Sorption studies of mixed chromium and chlorinated ethenes at the field and laboratory scales

The sorption and desorption behavior of hexavalent chromium and chlorinated ethenes in a sandy ground water aquifer with a low reduction capacity was evaluated by performing a variety of analyses and experiments at the laboratory (batch and column studies) and field (in situ injection-withdrawal experiment) scales. The partitioning coefficients determined from the field and laboratory experiments are generally similar. Both sets of experiments yielded relatively low partition coefficients for chromium and chlorinated ethenes. The column studies and injection-withdrawal experiment indicate that chromium has the potential to leach from aquifer sediments and act as a secondary source of contamination. However, the magnitude of the secondary source effect is not significant due to low concentrations of leachable contamination. The chromium sorption isotherm data were also simulated using the triple layer surface complexation model (TLM). The isotherm data were modeled using the TLM, illustrating the applicability of geochemical modeling for sorption of chromium to these sediments under variable pE-pH conditions.     

Selecting agri-environmental indicators to facilitate monitoring and assessment of EU agri-environmental measures effectiveness

Since its introduction in the early 1960s, the EU Common Agricultural Policy (CAP) has demonstrated a capacity to adapt and change in the face of new challenges. The reformed CAP, under AGENDA 2000, encourages more environmentally friendly farming practices. In the context of their rural development plans, Member States are required to link policies on agriculture with protection of the environment and to ensure that farmers meet environmental standards. Additionally, Member States should maintain and restore the quality of both their aquatic and adjacent terrestrial ecosystems according to the Directive 2000/60/EU, 'Establishing a framework for Community Action in the field of Water Policy'. Within this framework, agri-environmental indicators play an important role in planning and implementing CAP guidelines. However, selection and use of the proper indicators remains unresolved, considering that ecosystem processes are complex and interactions in most cases not obvious. This paper proposes a methodology for assessing the environmental state and impacts of current land use and management when implementing agri-environmental measures of CAP. The proposed methodology includes a modified Driving forces-Pressures-Impacts-Responses (DPSIR) framework, identification of Zones of Specific Functional Interest (ZSFI), and criteria for selecting agri-environmental indicators, which assess the functional performance of each zone and meet existing legislation. The Mygdonia Watershed (Greece) is an example where through use of both the appropriate Minimum Data Set of agri-environmental indicators at the identified zones and the proposed modified DPSIR, the functioning performance of each ZSFI can be assessed to evaluate the applied agri-environmental measures.     

Endocrine disrupting pesticides: implications for risk assessment

Endocrine disrupting (ED) chemicals are compounds that alter the normal functioning of the endocrine system, potentially causing disease or deformity in organisms and their offspring. Pesticides are used widely to kill unwanted organisms in crops, public areas, homes and gardens and medicinally to kill parasites. Many are proven or suspected to be EDs. Ancient physiological similarities between different vertebrate groups suggest that disorders observed in wildlife may indicate risks to humans. This makes accurate risk assessment and effective legislation difficult. In this paper, the hazardous properties of pesticides which are known to have ED properties are reviewed in order to assess the implications for risk assessment. As well as data on sources of exposure in the United Kingdom (UK) an assessment of the evidence on the health effects of ED pesticides is also included. In total, 127 have been identified from the literature and their effects and modes of action are listed in this paper. Using the UK as a case study, the types and quantities of pesticides used, and their methods of application are assessed, along with their potential pathways to humans. In the UK reliable data are available only for agricultural use, so non-agricultural routes of pesticide exposure have been poorly quantified. The exposure of people resident in or visiting rural areas could also have been grossly under-estimated. Material links between ED pesticide use and specific illnesses or deformities are complicated by the multifactorial nature of disease, which can be affected by factors such as diet. Despite these difficulties, a large body of evidence has accumulated linking specific conditions to ED pesticides in wildlife and humans. A more precautionary approach to the use of ED pesticides, especially for non-essential purposes is proposed.     

Comparison of tracer techniques for monitoring sewer losses

Two different experimental techniques employing conservative tracers to determine exfiltration losses in a sewer system are reported. Both techniques compare the in-sewer responses measured along designated indicator and reference sections to assess the level of exfiltration although with different degrees of reliability. The experimental and interpretation errors associated with a pulse dosing technique, in which Rhodamine WT is used as the single tracer, are described. The estimation of exfiltration requires the comparison of indicator and reference peaks which need to be well resolved and reproducible in order to provide realistic results. A more consistent technique involves the continuous dosing of two different tracers with the objective of producing simultaneous downstream peak tracer concentrations. Any errors due to flow variations are eliminated and the longer measurement period allows both peak and background concentrations to be more accurately determined. Rhodamine WT, Li and Br were used in different combinations over the approximately 20 min duration of each continuous dosing experiment and were found to demonstrate conservative behaviours with measured recoveries of 97.6-100.6%, 97.3-101.4% and 108.4-109.2%, respectively. The analytical problems associated with the determination of the different tracers in sewage are described and are shown to be responsible for the reduced accuracy of the results associated with the use of Br. The preferred combination of tracers is Rhodamine WT as the indicator and Li as the reference and these are shown to be capable of estimating sewer losses to an accuracy of +/-1.0% using the continuous dosing approach.