Recycling of printed circuit board e-wastes: a combined study of pyrolysis characteristics,kinetics and evolved gas analyses at various particle sizes

Journal of Material Cycles and Waste Management - The current study aimed to determine the characteristics and kinetic parameters for the pyrolysis of printed circuit board (PCB) wastes including...     

Correction to: Keeping pace with forestry: Multi-scale conservation in a changing production forest matrix

Ambio - In the original published article, the sentence “Nevertheless, semi-natural forest remnants continue to be harvested and fragmented (Svensson et al. 2018; Jonsson et al. 2019), and...     

Ultrafine particles at workplaces of a primary aluminium smelter

The number concentration and size distribution of ultrafine particles in a S?derberg and a prebake potroom of an aluminium primary smelter have been measured using a scanning mobility particle spectrometer. The particle morphology was studied by transmission electron microscopy (TEM). The study shows the existence of elevated number concentrations of ultrafine particles in both potrooms. The main source of these particles is likely to be the process of anode changing. The ultrafine particles were measured directly at the source but could also be identified as episodes of high number concentrations in the general background air. Unlike the larger particles belonging to the 50-100 nm mode, the nanoparticle mode could not be detected in the TEM indicating that they may not be stable under the applied sampling conditions and/or the high vacuum in the instrument.     

Bioaerosol sampling by a personal rotating cup sampler CIP 10-M

High concentrations of bioaerosols containing bacterial, fungal and biotoxinic matter are encountered in many workplaces, e.g. solid waste treatment plants, waste water treatment plants and sewage networks. A personal bioaerosol sampler, the CIP 10-M (M-microbiologic), has been developed to measure worker exposure to airborne biological agents. This sampler is battery operated; it is light and easy to wear and offers full work shift autonomy. It can sample much higher concentrations than biological impactors and limits the mechanical stress on the microorganisms. Biological particles are collected in 2 ml of liquid medium inside a rotating cup fitted with radial vanes to maintain an air flow rate of 10 l min(-1) at a rotational speed of approximately 7,000 rpm. The rotating cup is made of sterilisable material. The sampled particles follow a helicoidal trajectory as they are pushed to the surface of the liquid by centrifugal force, which creates a thin vertical liquid layer. Sterile water or another collecting liquid can be used. Three particle size selectors allow health-related aerosol fractions to be sampled according to international conventions. The sampled microbiological particles can be easily recovered for counting, incubation or further biochemical analysis, e.g., for airborne endotoxins. Its physical sampling efficiency was laboratory tested and field trials were carried out in industrial waste management conditions. The results indicate satisfactory collection efficiency, whilst experimental application has demonstrated the usefulness of the CIP 10-M personal sampler for individual bioaerosol exposure monitoring.     

Choosing policy instruments for controlling ozone depleting substances in a developing context: the case of Chile

Chile ratified the Montreal Protocol in 1990 which sets out an agenda for the reduction and then elimination of ozone depleting substances (ODS); however, by 1998 the country had not yet defined a strategy to encourage greater compliance, so that in the same year the National Environmental Commission decided to examine the policy options available. This paper examines the process followed to develop this strategy. As a first step it was necessary to look at how far the implicit policy of "business as usual" could be stretched without jeopardizing Chile's compliance obligations. A second step included quantifying compliance costs and their impact on different policy instruments and so policy choice. Finally, the attitudes of decision-makers or participants were identified, by interviews with officials of the different public agents involved, in order to weigh their views about policy. A strategy was proposed, based on this information, which the Chilean regulator has used, although not in its entirety. The methodology developed could well be useful for developing-country Protocol signatories building their own appropriate compliance strategy.     

Use of beryllium-7 to document soil redistribution following forest harvest operations

Rapid and reliable methods for documenting soil erosion associated with forest harvest operations are needed to support the development of best management practices for soil and water conservation. To address this need, the potential for using 7Be measurements to estimate patterns and amounts of soil redistribution associated with individual post-harvest events was explored. The 7Be technique, which was originally developed for use on agricultural land, was employed to estimate soil redistribution associated with a period of heavy rainfall within a harvested forest area located in the Lake Region of Chile (39 degrees 44'7' S, 73 degrees 10'39' W; 22% slope; and mean annual rainfall 2300 mm yr(-1)). The results provided by the 7Be technique were validated against direct measurements of soil gain or loss during the same period obtained using erosion pins. The information produced by the two approaches was similar. The results of this study demonstrate the potential for using 7Be measurements to document event-based erosion in recently harvested forest areas.     

Microplastic distribution in surface sediments along the Spanish Mediterranean continental shelf

Environmental Science and Pollution Research - Microplastics (MPs) are widely recognised as a contaminant of emerging concern in the marine environment. This work provides original data of the...     

Ovariectomy predisposes female rats to fine particulate matter exposure’s effects by altering metabolic,oxidative, pro-inflammatory,and heat-shock protein levels

Environmental Science and Pollution Research - The reduction of estrogen levels, as a result of menopause, is associated with the development of metabolic diseases caused by alterations in...     

Methods for integrated assessment

Integrated assessment is an approach that seeks to involve all disciplines in policy-relevant assessment. The process aims to encompass environmental science, technology and policy problems. The aim is to establish an overview of the environmental issue in question that attempts to avoid the mistakes of the past associated with narrow, one-sided or unidimensional approaches. A number of methods are available for such assessments. However, they are also subject to a number of limitations, difficulties and dilemmas. Integrated methods are inherently complicated and the tradition is that only experts are involved. New more inclusionary procedures have to be devised in order to involve all stakeholders. They have to be involved in the framing of the issue and in the value judgements associated with the approach. The dilemmas cannot be solved by integrated approaches, but they can be mitigated via proper identification, analysis and evaluation of the gains and losses involved. In structuring the analysis the existence of ignorance has to be accounted for and communicated to the managers and the political decision makers. The ignorance/uncertainty aspects can be partially accommodated for via an intensification of feasible monitoring and research so as to minimise the risks of unpleasant surprises. Electronic Publication     

Measuring the linkage between strategies on sustainability and institutional forces: an empirical study of Spanish universities

Policy documents are commonly identified as key outcomes that guide initiatives directed by senior university leaders towards sustainability through plans and policies. Many studies have called for a more integration of sustainability into universities. Nevertheless, the interest in sustainability issues has been more recent in the specific case of Spain. This study analyses the strategic plans developed by Spanish universities in the last decade with two different aims: first, we examine the extent to which Spanish universities are incorporating strategies on sustainability. The second goal evaluates whether the presence of strategies on sustainability in Spanish universities could be associated with coercive and mimetic pressures. Findings indicate the low presence of strategies on sustainability in Spanish universities. Moreover, the results seem to suggest that the presence of strategies on sustainability in Spanish universities could be linked with coercive and mimetic pressures emanating from the State performance funding for universities. The results indicate that universities usually incorporate practices and strategies on sustainability as a response of the pressure exerted by institutional forces, such as the funding systems of higher education institutions.