Nitrate-contaminated groundwater remediation by combined autotrophic and heterotrophic denitrification for sulfate and pH control: batch tests

Groundwater remediation was evaluated for combined autotrophic and heterotrophic denitrification under high (154 mg/L as CaCO₃) and low (95 mg/L as CaCO₃) alkaline conditions. Two levels of acetate (47 and 94 mg/L) and ethanol (24 and 48 mg/L) were added to the reactors. Obtained denitrification rates were 2.89, 2.58, 3.55, 1.96, and 2.0 mg-N/L?·?h for high alkaline conditions, whereas under low alkaline conditions has given 2.36, 1.94, 2.47, 2.74, and 2.29 mg-N/L?·?h for control, 47 and 94 mg/L acetate, and 24 and 48 mg/L ethanol, respectively. Nitrite was accumulated for controls but reactors with acetate and ethanol did not accumulate nitrite. Acetate and ethanol addition decreased sulfate to nitrate ratios in the range of 4.5–7.58 for high alkaline conditions (12.77 for control) and 4.43–6.78 for low alkaline conditions (7.90 for control). Acetate was more efficient compared with ethanol in controlling sulfate production and pH maintenance.     

Selective Leaching of Valuable Metals from Waste Printed Circuit Boards

Abstract

This study was carried out to recover valuable metals from the printed circuit boards (PCBs) of waste computers. PCB samples were crushed to smaller than 1 mm by a shredder and initially separated into 30% conducting and 70% nonconducting materials by an electrostatic separator. The conducting materials, which contained the valuable metals, were then used as the feed material for magnetic separation, where it was found that 42% of the conducting materials were magnetic and 58% were nonmagnetic. Leaching of the nonmagnetic component using 2 M H₂SO₄ and 0.2 M H₂O₂ at 85 °C for 12 hr resulted in greater than 95% extraction of Cu, Fe, Zn, Ni, and Al. Au and Ag were extracted at 40 °C with a leaching solution of 0.2 M (NH₄)₂S₂O₃, 0.02 M CuSO₄, and 0.4 M NH₄OH, which resulted in recovery of more than 95% of the Au within 48 hr and 100% of the Ag within 24 hr. The residues were next reacted with a 2 M NaCl solution to leach out Pb, which took place within 2 hr at room temperature.     

Independent factors associated with bicycle helmet use in a Korean population: A cross-sectional study

Objective: Although identification of factors that influence helmet use during bicycle riding is necessary for the selection of groups that require safe cycling education, limited baseline data are available. The aim of the present study was to analyze the rate of helmet use and the demographic factors that were independently associated with helmet use among Korean bicycle riders.

Methods: In this cross-sectional study, we used public data from the Sixth Korean National Health and Nutrition Examination Survey conducted in 2013 and 2014. Helmet users were defined as subjects who always, usually, or frequently wore helmets when cycling. Independent factors associated with helmet use were determined using odds ratios (ORss) adjusted for 5 demographic factors via multivariate logistic regression analysis.

Results: In the total population, 4,103 individuals were bicycle riders; among these, 782 individuals (19.1%) wore helmets. A total of 21.1% of male riders used helmets, compared to 15.5% of female riders (P <.001). The adjusted logistic regression model revealed that female sex (OR = 0.665; 95% confidence interval [CI], 0.554–0.797), teenage status (OR = 0.475, 95% CI, 0.333–0.678), and low household income (OR = 0.657, 95% CI 0.513–0.841) were significantly associated with nonuse of helmets.

Conclusions: Female sex, teenage status, and low household income were independent factors associated with the nonuse of helmets. We identified factors associated with helmet use during bicycle riding through analysis of baseline data on helmet usage.     

Significance of autochthonous Bacillus sp. KK1 on biomineralization of lead in mine tailings

The aim of the study was to isolate and characterize potential autochthonous bacteria for biomineralization of Pb in mine tailings. A total of four bacteria were isolated from the soil samples and assayed for tolerance to Pb and other heavy metals. Isolate KK1 exhibited maximum Pb resistance and was subsequently identified as Bacillus sp. based on the partial 16S rRNA gene sequences. The isolate KK1 reduced the Pb ions and did not harbor pbrT gene. Selective sequential extraction of bioaugmented soil revealed that the isolate significantly reduced (26%) the exchangeable fraction and increased (38%) the carbonate fraction of Pb. X-ray diffraction studies confirmed the role of bacterially induced calcite precipitation in the bioremediation of mine tailings. A significant increase in the urease (334%), DHO (dehydrogenase) (14%), and phosphatase (37%) activity was observed in the bioaugmented mine soil.     

Waste prevention for sustainable resource and waste management

Although the 2Rs (reduce and reuse) are considered high-priority approaches, there has not been enough quantitative research on effective 2R management. The purpose of this paper is to provide information obtained through the International Workshop in Kyoto, Japan, on 11–13 November 2015, which included invited experts and researchers in several countries who were in charge of 3R policies, and an additional review of 245 previous studies. It was found that, regarding policy development, the decoupling between environmental pressures and economy growth was recognized as an essential step towards a sustainable society. 3R and resource management policies, including waste prevention, will play a crucial role. Approaches using material/substance flow analyses have become sophisticated enough to describe the fate of resources and/or hazardous substances based on human activity and the environment, including the final sink. Life-cycle assessment has also been developed to evaluate waste prevention activities. Regarding target products for waste prevention, food loss is one of the waste fractions with the highest priority because its countermeasures have significant upstream and downstream effects. Persistent organic pollutants and hazardous compounds should also be taken into account in the situation where recycling activities are globally widespread for the promotion of a material-cycling society.     

Development of a cloud condensation nuclei (CCN) counter using a laser and charge-coupled device (CCD) camera

A continuous flow streamwise thermal gradient cloud condensation nuclei (CCN) counter with an aerosol focusing and a laser-charge-coupled device (CCD) camera detector system was developed here. The counting performance of the laser-CCD camera detector system was evaluated by comparing its measured number concentrations with those measured with a condensation particle counter (CPC) using polystyrene latex (PSL) and NaCl particles of varying sizes. The CCD camera parameters (e.g. brightness, gain, gamma, and exposure time) were optimized to detect moving particles in the sensing volume and to provide the best image to count them. The CCN counter worked well in the particle number concentration range of 0.6–8000 #·cm^-3 and the minimum detectable size was found to be 0.5 μm. The supersaturation in the CCN counter with varying temperature difference was determined by using size-selected sodium chloride particles based on K?hler equation. The developed CCN counter was applied to investigate CCN activity of atmospheric ultrafine particles at 0.5% supersaturation. Data showed that CCN activity increased with increasing particle size and that the higher CCN activation for ultrafine particles occurred in the afternoon, suggesting the significant existence of hygroscopic or soluble species in photochemically-produced ultrafine particles.     

Distribution characteristics of nonylphenols in the artificial Lake Shihwa, and surrounding creeks in Korea

Nonylphenols were determined from the water, suspended particle, and sediment samples taken from the Lake Shihwa in Korea and its surrounding creeks flowing through municipal and industrial areas, and into the lake. The nonylphenols were detected at the concentration ranges of 0.0-41.3 microg/l, 0.0-116.6 and 0.3-31.7 mg/kg in water, suspended particle and sediment samples respectively. The contamination levels of nonylphenols were increased along the down stream. Considerably high levels of nonylphenols were found at the industrial area compared to the municipal area. No remarkable differences were found between the isomer patterns of nonylphenols for the sample matrices of each sampling site, i.e. water, suspended solids and sediment. Strong correlations between water and sediment with 10(5.2) of the mean partition coefficient (Koc ) were observed. These indicate that most of nonylphenols came from industrial wastewater at high level. It is thought that the water quality of the Lake Shihwa is affected greatly by industrial environments surrounding.     

Development of an empirical equation for the transverse dispersion coefficient in natural streams

In this study, a new empirical equation for the transverse dispersion coefficient has been developed based on the hydraulic and geometric parameters in natural streams using a regression technique. First, a total of 32 data sets in 16 streams were collected. Among those sets, 16 sets were used for deriving the new equation, and the other 16 sets were used for verifying the equation. Then, through dimensional analysis, it was found that the normalized transverse dispersion coefficient is associated with several parameters such as sinuosity, aspect ratio, and a friction term. The robust least square method was applied to estimate regression coefficients. The newly proposed equation was proven to be superior in explaining the dispersion characteristics of natural streams more precisely compared to the existing equations.