Reduction of sludge formed during a coagulation treatment of Ridomil Gold by means of non-thermal quenched plasma pre-treatment

Chemical coagulation and adsorption, despite many drawbacks, are actually the main techniques used for the removal of pollutants from aqueous solution; however, these techniques are becoming ineffective due to the exponential increase in the amount and complexity of discharged pollutants; thus, the sludge treatment process became a more complex challenge. The present study focuses on the way to reduce the quantity of sludge formed during the removal of Ridomil Gold, a widely used pesticide-fungicide in agriculture. Results revealed that pre-treatment of initial waste solution by the gliding arc (Glidarc), a source of non-thermal plasma, leads to a significant reduction of the sludge formed during the coagulation treatment. For a 20-min pre-treated effluent Glidarc followed by chemical coagulation, there was a reduction in the volume of sludge formed in the order of 90 and 80% for alum and ferric sulfate coagulants respectively without reducing the performance of pesticide removal. Therefore, there is a positive synergism between treatment by chemical coagulation and plasma treatment. These results suggest that the Glidarc can be an effective solution for the reduction of sludge obtained during treatment by coagulation.     

Investigating toxic metal levels in popular edible fishes from the South Durban basin: implications for public health and food security

Contamination of the ocean by heavy metals may have ecosystem-wide implications because they are toxic even if present in trace levels, and the relative ease of their bioaccumulation by marine organisms may affect human health, primarily through consumption of contaminated fish. We evaluated metal concentrations in six different popular edible fish species and estimated the potential health risks from consumption of contaminated fish. There was no correlation between fish length and average metal accumulation although the fish species tended to accumulate significantly more Al and Zn (P?<?0.05) than any of the other metals. Significantly higher Mn concentrations were found in fish gills compared to other body parts in all fish species. Bronze seabream, Catface rockcod, and Slinger seabream had significantly higher mean Cr concentration in the liver than in either the tissues or gills. The highest concentration of Zn in fleshy tissue was in Horse mackerel (56.71 μg g^?1) followed by Bronze seabream (31.07 μg g^?1). Al levels ranged from 5.6 μg g^?1 in Atlantic mackerel to 35.04 μg g^?1 in Horse mackerel tissue while Cu and Cr concentrations were highest in the tissues of Horse mackerel (6.83 and 1.81 μg g^?1, respectively) followed by Santer seabream (3.15; 1.09 μg g^?1) and Bronze seabream (3.09; 1.30 μg g^?1), respectively. The highest tissue concentration of Mn was detected in Bronze seabream (8.23 μg g^?1) followed by Catface rockcod (6.05 μg g^?1) and Slinger seabream (5.21 μg g^?1) while Pb concentrations ranged from a high of 8.44 μg g^?1 in Horse mackerel to 1.09 μg g^?1 in Catface rockcod. However, the estimated potential health risks from fish consumption as determined by the target hazard quotient (THQ) and hazard index (HI) were significantly lower than 1, implying that metals were not present in sufficiently high quantities to be of any health and/or food and security concern in the studied fishes.     

Spatial distribution characteristics of soil organic carbon in subtropical forests of mountain Lushan,China

The study on the spatial distribution of forest soil organic carbon (SOC) is of great significance for accurate assessment of carbon storage in forest ecosystems. In the present study, by taking eight kinds of forest soils of Mountain Lushan in the subtropical area as the research object, we studied the spatial distribution characteristics of SOC in this mountainous area. The results showed that the SOC content and SOC density (SOCD) of main forest types in the Mountain Lushan were lower than the national and the world average. The soil layer of Lushan forest was thinner, and the SOC and active SOC (ASOC) contents of different forest types and SOCDs are the highest in the surface soil. SOCD of the topsoil accounts for 32.64–54.03% of the total SOCD in the whole soil profile. Surface litter is an important source of SOC, and the different vegetation types are the important reason for the different spatial distribution of SOC in this area. Soil SOC contents in the high-altitude forest (bamboo forest, deciduous broadleaf forest, Pinus taiwanensis forest, evergreen-deciduous forest, and coniferous-broadleaved mixed forest) were higher than those in the low-altitude forest (evergreen broadleaf forest, shrub, and Pinus massoniana forest). However, the difference in SOC content exhibited at the altitude gradient is significantly lower than that in SOC in the soil profile. This indicates that both soil depth and elevation are the important factors that affected SOC distribution. However, the influence of soil depth on spatial distribution of SOC may be more complex than that of altitude. Vegetation types and soil properties are the main reasons for the large differences of reduction rate in the contents of SOC and ASOC.     

Construction of avulsion potential zone model for Kulik River of Barind Tract,India and Bangladesh

Avulsion is a natural fluvial process but considered it as a hazard in the populated region due to the chance of immense failure of lives and properties. So, early warning indicates that the zone of avulsion can facilitate the people living there. About 317 numbers of local and regional historical imprints of channel cutoff along river Kulik claim the need of this work. The present study tried to identify avulsion potential zone (APZ) of Kulik river of Indo-Bangladesh using multi-parametric weighted combination approach. Analytic hierarchy approach (AHP) is applied for weighting the used parameters. Avulsion potential model clearly exhibits that 9.51-km stream segment of middle and lower catchment is highly susceptible for avulsion especially during sudden high discharge and earthquake incidents. There is also high chance of channel avulsion following the existing Paleo-avulsion courses and left channels. Hard points can also be erected alongside the main channel for resisting channel avulsion propensity.     

Contamination of soil and the medicinal plant <Emphasis Type="Italic">Phyllanthus niruri</Emphasis> Linn. with cadmium in ceramic industrial areas

Phyllanthus niruri is a plant that is used to prevent calcium oxalate crystallisation and to block the stone formation in urolithiasis. Contaminants in the environment can be readily taken up by medicinal plants due to their ability to absorb chemicals into their tissues. If contaminated plants are ingested, they have the potential to negatively affect human and environmental health. The aim of this study was to assess contamination in the soil and the medicinal plant P. niruri by cadmium (Cd) in ceramic industrial areas of Monte Carmelo, Brazil. Soil samples and plant samples (divided in root, shoot and leaves) were collected from a contaminated monitoring site and from a rural area (which was used as a reference site for comparative purposes). The Cd concentrations of the samples were analysed with an atomic absorption spectrometer. P. niruri was found to be sensitive to soil contamination by Cd that was attributed to ceramic industrial emissions. The results revealed that Cd bioaccumulation in the roots and shoots of P. niruri was associated with a significant increase (p?<?0.05) in the concentration of active lignan compounds (phyllanthin and hypophyllanthin) in the leaves. The identification of high concentrations of Cd and active lignan compounds suggests a risk of contamination of the site and the risk of a high dose of Cd to people exposed at the site.     

Background biomonitoring of residue levels of 137 pesticides in the blood plasma of the general population in Beijing

Due to the widespread use of pesticides, human exposure to pesticides is possible and can potentially cause adverse impacts on public health. We measured 137 pesticides including organophosphorus, organochlorine, pyrethroid and carbamate pesticides together with various herbicides in 100 human blood samples collected from the general population in Beijing. The samples were analysed by triple quadrupole tandem gas chromatography-mass spectrometry. In total, 24 organochlorine pesticides, 5 pyrethroid pesticides and 6 organophosphorus pesticides were detected. The detection rates of HCB, α-HCH, β-HCH, γ-HCH, p,p′-DDE and quintozene were 99, 96, 74, 72, 96 and 95%, respectively. No statistically significant gender difference in the blood concentrations of the pesticides was found. Consistent with the trend of the increasing β-HCH, p,p′-DDE and quintozene concentrations with age, a strong positive correlation between the age and concentrations of β-BHC, p,p′-DDE and quintozene was observed.     

Experimental arid land afforestation in Central Anatolia,Turkey

The afforestation of arid lands faces many challenges, and perhaps the most important key for success is choosing one or more species that are adapted well for local environmental conditions. We explored species that would be suitable for the steppe region of Central Anatolia. Intensive site preparation included ripping the subsoil (to 80 cm) and plowing the upper soil before planting seedlings of Elaeagnus angustifolia, Robinia pseudoacacia, Fraxinus angustifolia, and Pinus nigra were used as tree species. We also tested the success of several shrub species: Amygdalus orientalis, Calligonum polygonoides, and Spartium junceum. After five growing seasons, E. angustifolia showed the highest survival, with 80% of planted seedlings remaining. For the shrubs, A. orientalis was the most successful species with a 95% survival rate. Broad-leaved trees grew a cumulative average of 34 cm in height in 5 years, whereas P. nigra seedings grew only 9 cm. The greatest height growth occurred in the shrubs, with A. orientalis gaining 40 cm in height in 5 years. Overall, E. angustifolia and A. orientalis appeared best suited for afforestation in these areas. R. pseodoacacia and F. angustifolia may also be used as alternative species.     

Bioremediation of tannery effluent by Cr- and salt-tolerant bacterial strains

Microorganisms have great potential to control environmental pollution, particularly industrial sources of water pollution. Currently, leather industry is regarded as the most polluting and suffering from negative impacts due to the pollution it adds to the environment. Chromium, one of the hazardous pollutants discharged from tanneries, is highly toxic and carcinogenic in nature. Effective treatment of tannery effluent is a dire need of the era as a part of environmental management. Among all the wastewater treatment technologies, bioremediation is the most effective and environment-friendly tool to manage the water pollution. The present study evaluated the potential of 11 previously isolated bacterial strains, tolerant to high concentrations of salts and Cr for the bioremediation of tannery effluent. Among all the tested strains, Enterobacter sp. HU38, Microbacterium arborescens HU33, and Pantoea stewartii ASI11 were found most effective in reducing biological oxygen demand (BOD), chemical oxygen demand (COD), total dissolved solids (TDS), total suspended solids (TSS), and chromium (Cr) 70, 63, 57, 87, and 54%, respectively, of tannery effluent and proliferated well under highly toxic conditions, at 9 days of incubation. The pollutant removal efficacy of these bacterial strains can be improved by extending the incubation period or by increasing the amount of inoculum.     

Use of water quality index and multivariate statistical techniques for the assessment of spatial variations in water quality of a small river

Rapid urban development has led to a critical negative impact on water bodies flowing in and around urban areas. In the present study, 25 physiochemical and biological parameters have been studied on water samples collected from the entire section of a small river originating and ending within an urban area. This study envisaged to assess the water quality status of river body and explore probable sources of pollution in the river. Weighted arithmetic water quality index (WQI) was employed to evaluate the water quality status of the river. Multivariate statistical techniques namely cluster analysis (CA) and principal component analysis (PCA) were applied to differentiate the sources of variation in water quality and to determine the cause of pollution in the river. WQI values indicated high pollution levels in the studied water body, rendering it unsuitable for any practical purpose. Cluster analysis results showed that the river samples can be divided into four groups. Use of PCA identified four important factors describing the types of pollution in the river, namely (1) mineral and nutrient pollution, (2) heavy metal pollution, (3) organic pollution, and (4) fecal contamination. The deteriorating water quality of the river was demonstrated to originate from wide sources of anthropogenic activities, especially municipal sewage discharge from unplanned housing areas, wastewater discharge from small industrial units, livestock activities, and indiscriminate dumping of solid wastes in the river. Thus, the present study effectively demonstrates the use of WQI and multivariate statistical techniques for gaining simpler and meaningful information about the water quality of a lotic water body as well as to identify of the pollution sources.     

Assessment using CFD of the wind direction on the air discharges caused by natural ventilation of a poultry house

Air inside poultry houses must be removed on a regular basis to prevent excess of heat, particles and noxious gases that can imperil animals. To cope with this issue, natural ventilation could be an effective method when assisted by accurate predictions. This study investigates air discharges caused by natural ventilation of a poultry house by means of a three-dimensional computational fluid dynamics (CFD) model. It solves the governing equations of momentum, heat and mass transport, radiative transfers and animal-generated heat. Wind directions of 0°, 36° and 56° (0° corresponds to a wind blowing perpendicular to the ridgeline) were investigated; the CFD model predictions achieved a RMSE of 1.2 °C and 0.6 g[H₂O] kg^?1 [dry air] for internal temperature and absolute humidity, respectively, when air blew with an angle of 36°. Air renewal rates (ARR) were 39.5 (±?1.9), 34.9 (±?2.2) and 33.6 (±?1.7) volumes of the building per hour, when air blew at 0°, 36° and 56°, respectively. Such ARR predictions served to know how the gases contained in air would likely spread downstream from the building in order to define regions of potentially high gas concentration that could endanger neighbouring habitable facilities.