Innovative micro hole machining with minimum burr formation by the use of newly developed micro compound tool

The study focuses on the efforts for minimization of burr formation and improvement of hole surface roughness in micro through-hole machining. It deals with the development of micro compound tool which is consisting of a micro flat drill as the drilling part and a micro diamond-electroplated-grinding part for hole finishing. The finishing diameters of each drilling and grinding parts of the fabricated micro compound tool are 90 μm and 100 μm, respectively. The study focuses mainly on the effect of drill point angle and ultrasonic vibration applied during micro hole machining to the hole entrance and exit burrs formation. The used workpiece is made of stainless steel (SUS304) with a thickness of 100 μm. From the experiment, it was found that the tool having drill point angle of 118° resulted in a smaller burr formation although hole machining was conducted for 600 holes. Furthermore, the application of ultrasonic vibration during hole machining could improve the performance of the developed micro compound tool and decreased the burr size, especially the exit burr.     

Determination of persistent organic pollutants by gas chromatography/laser multiphoton ionization/time-of-flight mass spectrometry

An authentic mixture of polychlorinated biphenyls was measured using a short wide-bore capillary column for the group separation of major components present in an actual sample of Kanechlor. The limits of detection were improved by ca. 2 fold in comparison with those obtained using a conventional capillary column, since the retention time was reduced and the amount of analytes introduced into the mass spectrometer per unit time could be increased. On the other hand, surface-water and sediment samples containing polycyclic aromatic hydrocarbons (PAHs) were collected from the river located in the vicinity of a waste water treatment plant. Even acenaphthylene, a minor component of the mixture could be measured for the sediment sample, and the concentrations were determined for several heavy PAHs. As demonstrated, a technique involving laser multiphoton ionization/time-of-flight mass spectrometry was useful as a sensitive and selective analytical tool for the trace analysis of persistent organic pollutants in an environmental sample.     

Geographic variation in a predator-induced defense and its genetic basis

Predator-induced morphological defenses are a well-known form of phenotypic plasticity, but we continue to have a limited understanding of geographic variation in these responses and its genetic basis. Here we examine genetic variation and geographic differentiation in the inducible defenses of tadpoles (Rana pirica) in response to predatory salamander larvae (Hynobius retardatus). To do so, we crossed male and female frogs from a "mainland" Japanese island having predaceous salamanders and a more isolated island not having predaceous salamanders and raised resulting offspring in the presence and absence of H. retardatus. Mainland tadpoles exhibited a higher capacity to express the inducible morphology (a more bulgy body) than those from the predator-free island, and expression of the bulgy morph in mainland-island hybrids produced phenotypes that were intermediate to those produced by pure crosses. In addition, parental sex had no effect on expression of the bulgy morph. Our results support the hypothesis that geographic variation in inducible defenses is linked to the additive effects of autosomal alleles that are shaped by differences in historical exposure to the inducing predator.     

Deposition processes of ionic constituents to snow cover

Atmospheric deposition is an important removal process of aerosol particles and gases from the atmosphere. To elucidate the relative contributions of wet and dry processes and in-cloud and below-cloud scavenging based on deposition amounts in winter at Mt. Tateyama, central Japan, we obtained daily samples (December, 2006–March, 2007) of size-segregated aerosol particles and precipitation at Senjyugahara (SJ; 475 m a.s.l.) and vertical samples of spring snow cover at Murododaira (MR, 2450 m a.s.l., 13 km distance from SJ) on the western flank of Mt. Tateyama. The NH₄⁺ and nssSO₄^2? in aerosols were mostly found in the fine fraction (<2 μm), although Na⁺, NO₃^?, and nssCa²⁺ were mainly detected in the coarse fraction (>2 μm). Average ionic concentrations (μg g^?1) in precipitation at SJ were higher about 3.8 for Na⁺ and nssCa²⁺, 3.4 for NO₃^?, 3.7 for NH₄⁺, 2.5 for nssSO₄^2? than those at MR, whereas cumulative precipitation amounts at SJ and MR were, respectively, 84 and 175 cm of water equivalent. Wet and dry deposition amounts during the study period were estimated for sites using size-segregated aerosol data, winter averages of HNO₃, NH₃, and SO₂ concentrations, and dry deposition velocities. Particle-dry deposition comprised about 3% (Na⁺) to 11% (NH₄⁺) of the total deposition at MR. The maximum amounts of gas dry deposition were estimated, respectively, as 4, 13, and 3% of the total deposition at MR for NH₄⁺, NO₃^?, and nssSO₄^2?. The relative contributions of below-cloud scavenging (BCS) between MR and SJ were estimated as considering the wet only deposition amount at MR. Higher contributions of BCS were obtained for Na⁺ (56%) and nssCa²⁺ (45%), whereas BCSs for NH₄⁺, NO₃^?, and nssSO₄^2? were lower than 28%. Ionic constituents existing predominantly in the coarse fraction showed a large contribution of BCS.     

Local Circulation with Aeolian Dust on the Slopes and Foot Areas of the Tianshan and Kunlun Mountains around the Taklimakan Desert, China

Four automatic weather stations (AWS) were installed on the slopes and foot areas of the Tianshan and Kunlun Mountains along a longitude of 80 degrees east: (1) Taglak 2400 m a.s.l., (2) Aksu 1000 m, (3) Kartash 2800 m, and (4) Qira 1700 m. These two slopes face the Taklimakan Desert. Tagliak lies on the southern slope of Tianshan, and Kartash on the northern slope of Kunlun. The meteorological characteristics of the mountainous regions were investigated using surface data obtained during an intensive observation period (IOP) in spring 2002. It was found that visibility on the slopes decreases in the daytime, and there is no relationship between visibility and wind speed in the mountainous areas. Two snow layers containing dust particles were observed in the snow cover in Taglak during the IOP in spring 2003. These results suggest that a warm air parcel containing aeolian dust climbs over the slopes of the mountainous areas, and dust particles in the mountainous areas are transported from the foot areas.     

Assessment of human exposure to PCDDs,PCDFs and Co-PCBs using hair as a human pollution indicator sample I: Development of analytical method for human hair and evaluation for exposure assessment

Dioxins including polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and co-planar polychlorinated biphenyls (Co-PCBs) are highly toxic. Even at environmental pollution levels, they cause hormonal damage in women, and they have been shown to induce immunosuppression and genital function damage in humans. In this study, a new method using isotope dilution was established to detect PCDDs, PCDFs and Co-PCBs in human hair. This method, comprised of washing and cutting of hair, alkaline decomposition, hexane extraction, multilayer silica gel column chromatography, high performance liquid chromatography with a porous graphite carbon column and analysis by high resolution gas chromatography/high resolution mass spectrometry, enabled us to analyze PCDDs, PCDFs and Co-PCBs at trace levels of less than pg/g with good reproducibility. In addition, there was a correlation between some isomers in human hair and blood collected from identical donors. Human hair analysis is useful to evaluate human risk assessment including that due to environmental pollution.