The legal environmental risk analysis (LERA) sample of mining and the environment in Turkish legislation

As advancing technology and increasing demands for natural resources continue to mount pressure on the environment, environmental conservation and sustainable management have become ever more important. Individual countries have been increasingly taking action to reduce environmental destruction caused by human activities in an attempt to find a balance in between the necessary exploitation of resources and environmental conservation. In Turkey, the struggle between environmental conservation and mining activities is set within the legal context, with the requisite legal regulations (which describe various procedures) in the midst of being updated or renewed. The legal environmental risk analysis (LERA), beginning by discussing the main legal regulations of environmental conservation in relation to mining activities, defines basic environmental components which form the basis of environmental conservation in relation to mining, and analyzes the impact of mining on each component. The analysis (LERA) finishes with an evaluation of the components as they currently stand and makes some suggestions for the improvement of insufficient regulations.     

Properties of concrete paving blocks made with waste marble

Marble industry produces large amounts of waste marble - what causes environmental problems. In paving blocks based on two cement types we have partly replaced aggregate with waste marble. Physical and mechanical tests were performed on blocks so produced. The cement type turns out to be an important factor. Mechanical strength decreases with increasing marble content while freeze-thaw durability and abrasive wear resistance increase. Waste marble is well usable instead of the usual aggregate in the concrete paving block production.     

Essential and non-essential trace element concentrations in muscle and liver of a pregnant Munk’s pygmy devil ray (Mobula munkiana) and its embryo

During gestation, essential and non-essential trace elements are transferred from the pregnant females to embryos. This study aimed to determine and compare the concentrations of seven essential trace elements (Fe, Zn, Se, Cu, Mn, Cr, Co) and six non-essential trace elements (As, Cd, V, U, Tl, Ag) in the muscle and the liver of a Munk’s pygmy devil ray pregnant female, Mobula munkiana, and its embryo. Transfer evidence of essential and non-essential trace elements was detected in M. munkiana tissues. Arsenic was found in elevated concentrations in the pregnant female and the embryo tissues. Elevated levels of Cd, V, U, and Ag were found in the pregnant female liver, but were minimal in the embryo tissue. This is the first study to investigate maternal transfer of essential and non-essential trace elements in these species and their reproductive strategy.

     

Possible human health risk of some heavy metals from consumption of tilapia fish from Lake Mariut,Egypt

Environmental Science and Pollution Research - Lake Mariut Main Basin (MB) is not only one of the three basins composing Lake Mariut (LM) but is also the main source of the popular tilapia fish to...     

Algal biomass valorization for biofuel production and carbon sequestration: a review

The world is experiencing an energy crisis and environmental issues due to the depletion of fossil fuels and the continuous increase in carbon dioxide concentrations. Microalgal biofuels are produced using sunlight, water, and simple salt minerals. Their high growth rate, photosynthesis, and carbon dioxide sequestration capacity make them one of the most important biorefinery platforms. Furthermore, microalgae's ability to alter their metabolism in response to environmental stresses to produce relatively high levels of high-value compounds makes them a promising alternative to fossil fuels. As a result, microalgae can significantly contribute to long-term solutions to critical global issues such as the energy crisis and climate change. The environmental benefits of algal biofuel have been demonstrated by significant reductions in carbon dioxide, nitrogen oxide, and sulfur oxide emissions. Microalgae-derived biomass has the potential to generate a wide range of commercially important high-value compounds, novel materials, and feedstock for a variety of industries, including cosmetics, food, and feed. This review evaluates the potential of using microalgal biomass to produce a variety of bioenergy carriers, including biodiesel from stored lipids, alcohols from reserved carbohydrate fermentation, and hydrogen, syngas, methane, biochar and bio-oils via anaerobic digestion, pyrolysis, and gasification. Furthermore, the potential use of microalgal biomass in carbon sequestration routes as an atmospheric carbon removal approach is being evaluated. The cost of algal biofuel production is primarily determined by culturing (77%), harvesting (12%), and lipid extraction (7.9%). As a result, the choice of microalgal species and cultivation mode (autotrophic, heterotrophic, and mixotrophic) are important factors in controlling biomass and bioenergy production, as well as fuel properties. The simultaneous production of microalgal biomass in agricultural, municipal, or industrial wastewater is a low-cost option that could significantly reduce economic and environmental costs while also providing a valuable remediation service. Microalgae have also been proposed as a viable candidate for carbon dioxide capture from the atmosphere or an industrial point source. Microalgae can sequester 1.3 kg of carbon dioxide to produce 1 kg of biomass. Using potent microalgal strains in efficient design bioreactors for carbon dioxide sequestration is thus a challenge. Microalgae can theoretically use up to 9% of light energy to capture and convert 513 tons of carbon dioxide into 280 tons of dry biomass per hectare per year in open and closed cultures. Using an integrated microalgal bio-refinery to recover high-value-added products could reduce waste and create efficient biomass processing into bioenergy. To design an efficient atmospheric carbon removal system, algal biomass cultivation should be coupled with thermochemical technologies, such as pyrolysis.

     

Sulfonated graphene nanomaterials for membrane antifouling,pollutant removal,and production of chemicals from biomass: a review

Water pollution and the unsustainable use of fossil fuel derivatives require advanced catalytic methods to clean waters and to produce fine chemicals from modern biomass. Classical homogeneous catalysts such as sulfuric, phosphoric, and hydrochloric acid are highly corrosive and non-recyclable, whereas heterogeneous catalysts appear promising for lignocellulosic waste depolymerization, pollutant degradation, and membrane antifouling. Here, we review the use of sulfonated graphene and sulfonated graphene oxide nanomaterials for improving membranes, pollutant adsorption and degradation, depolymerization of lignocellulosic waste, liquefaction of biomass, and production of fine chemicals. We also discuss the economy of oil production from biomass. Sulfonated graphene and sulfonated graphene oxide display an unusual large theoretical specific surface area of 2630 m²/g, allowing the reactants to easily enter the internal surface of graphene nanosheets and to reach active acid sites. Sulfonated graphene oxide is hydrophobic and has hydrophilic groups, such as hydroxyl, carboxyl, and epoxy, thus creating cavities on the graphene nanosheet’s surface. The adsorption capacity approached 2.3–2.4 mmol per gram for naphthalene and 1-naphthol. Concerning membranes, we observe an improvement of hydrophilicity, salt rejection, water flux, antifouling properties, and pollutant removal. The nanomaterials can be reused several times without losing catalytic activity due to the high stability originating from the stable carbon–sulfur bond between graphene and the sulfonic group.

     

The effect of different educational interventions on schoolchildren's knowledge of earthquake protective behaviour in Israel

Knowledge of appropriate behaviour during an earthquake is crucial for prevention of injury and loss of life. The Israeli Home Front Command conducts a yearly earthquake education programme in all Israeli schools, using three types of educational interventions: lectures, drills and a combination of the two. The aim of this study was to evaluate the effectiveness of these interventions in providing students with knowledge. We distributed a questionnaire to 2,648 children from the 5th and 6th grades in 120 schools nationwide. Knowledge scores for both 5th and 6th grades were increased, regardless of type of intervention, compared to the non-exposure group. A combined intervention of lectures and drills resulted in the highest knowledge scores. Our findings suggest that for the age group studied a combination of lectures and drills will likely prepare students best for how to behave in the event of an earthquake.