Biochemical properties of some Salvia L. species

Antioxidant capacity, total phenol and mineral contents of aerial parts of sage belonging to some Salvia species were established. The lowest and highest antioxidant values of Salvia dichroantha Stapf and Salvia heldreichiana Boiss. ex Benth. extracts were found as 73.855 and 80.207 mg GAE/g, respectively. While the highest total phenol was established in Salvia tomentosa Mil. (13.316 mg GAE/100 ml), the lowest level was found in Salvia halophila Hedge (6.168 mg GAE/100 ml). While K contents of plants changed between 14,518 and 24,171 mg/kg, Ca contents ranged between 12,402 and 18,553 mg/kg. P and Mg contents were found low compared with K and P values of plants. Mg content was changed between 2,118 and 2,914 mg/kg; the mean was calculated as 2,496 mg/kg. P contents of plants were determined between 1,385 to 1,910 mg/kg. As a microelement, Fe was found at the highest level. Fe contents of plants were found between 179 and 782 mg/kg.     

Chemometric application in identifying sources of organic contaminants in Langat river basin

Increasing urbanization and changes in land use in Langat river basin lead to adverse impacts on the environment compartment. One of the major challenges is in identifying sources of organic contaminants. This study presented the application of selected chemometric techniques: cluster analysis (CA), discriminant analysis (DA), and principal component analysis (PCA) to classify the pollution sources in Langat river basin based on the analysis of water and sediment samples collected from 24 stations, monitored for 14 organic contaminants from polycyclic aromatic hydrocarbons (PAHs), sterols, and pesticides groups. The CA and DA enabled to group 24 monitoring sites into three groups of pollution source (industry and urban socioeconomic, agricultural activity, and urban/domestic sewage) with five major discriminating variables: naphthalene, pyrene, benzo[a]pyrene, coprostanol, and cholesterol. PCA analysis, applied to water data sets, resulted in four latent factors explaining 79.0% of the total variance while sediment samples gave five latent factors with 77.6% explained variance. The varifactors (VFs) obtained from PCA indicated that sterols (coprostanol, cholesterol, stigmasterol, β-sitosterol, and stigmastanol) are strongly correlated to domestic and urban sewage, PAHs (naphthalene, acenaphthene, pyrene, benzo[a]anthracene, and benzo[a]pyrene) from industrial and urban activities and chlorpyrifos correlated to samples nearby agricultural sites. The results demonstrated that chemometric techniques can be used for rapid assessment of water and sediment contaminations.     

我国四个大气背景点颗粒物浓度及其元素分布特征

选择全国由南至北的4个大气背景站(广东南岭、湖北神农架、山西庞泉沟和吉林长白山),于2013年分4个季度同步采集环境空气颗粒物PM10和PM2.5样品,采用微波消解电感耦合等离子体质谱法测定滤膜样品中60余种元素.结果表明,4个背景点PM2.5日均质量浓度平均值为17μg·m-3,PM10为29μg·m-3,低于《环境空气质量标准》(GB 3095—2012)规定的一级浓度限值.第一季度的PM10和PM2.5最高,除长白山第三季度高于第四季度之外,其他3个点位均呈现第二季度第四季度第三季度的趋势.PM2.5和PM10二者呈线性正相关,4个季度的PM2.5/PM10比值均小于0.5,第二、第三季度较高,而第一、第四季度较低.PM10和PM2.5中元素随季节变化不大,PM2.5含量在同一水平上低于PM10.Na、Mg、Al、S、K、Ca、Fe、Zn质量浓度在0.1—10μg·m-3之间,P、Ti、Mn、Ni、Cu、Ba、Pb质量浓度在10—100 ng·m-3之间,Cd、Co、Ge、Ga、Zr、Sr、V等质量浓度在0.01—10 ng·m-3之间.K、Al、Ca含量大于10%,S、Mg、Na、Fe、Zn、Pb、Mn含量大于1%,Cu、P、Ba、Ti量介于0.5%—1%,其他痕量元素含量所占比例小于0.5%.     

Effect of alkalinity on the performance of a simulated landfill bioreactor digesting organic solid wastes

This study investigated the effects of alkalinity on the anaerobic treatment of the organic solid wastes collected from the kitchen of Engineering Faculty in Dokuz Eylul University, Izmir, Turkey and the leachate characteristics treated in three simulated landfill anaerobic bioreactors. All of the reactors were operated with leachate recirculation. One reactor was operated without alkalinity addition. The second reactor was operated by the addition of 3 g l-1 d-1 of NaHCO3 alkalinity to the leachate and the third reactor was operated by the addition of 6 g l-1 d-1 NaHCO3 alkalinity to the leachate. After 65 d of anaerobic incubation, it was observed that the chemical oxygen demand (COD), volatile fatty acids (VFA) concentrations, and biochemical oxygen demand to chemical oxygen demand (BOD5/COD) ratios in the leachate samples produced from the alkalinity added reactors were lower than the control reactor while the pH values were higher than the control reactor. The COD values were measured as 18900, 3800 and 2900 mg l-1 while the VFA concentrations were 6900, 1400 and 1290 mg l-1, respectively, in the leachate samples of the control, and reactors containing 3 g l-1 NaHCO3 and 6 g l-1 NaHCO3 after 65 d of anaerobic incubation. The total nitrogen (TN), total phosphorus (TP) and ammonium nitrogen (NH4-N) concentrations in organic solid waste (OSW) significantly reduced in the reactor containing 6 g l-1 NaHCO3 by d 65. The values of pH were 6.54, 7.19 and 7.31, after 65 d of anaerobic incubation, respectively, in the aforementioned reactors results in neutral environmental conditions in alkalinity added reactors. Methane percentage of the control, reactors containing 3 g l-1 NaHCO3 and 6 g l-1 NaHCO3 were 37%, 64% and 65%, respectively, after 65 d of incubation. BOD5/COD ratios of 0.27 and 0.25 were achieved in the 3 and 6 g l-1 NaHCO3 containing reactors, indicating a better OSW stabilization. Alkalinity addition reduced the waste quantity, the organic content of the solid waste and the biodegradation time.     

Effect of a heavy metal model mixture on biological parameters of rainbow trout <Emphasis Type="Italic">oncorhynchus mykiss</Emphasis>

The effects of a model mixture (HMMM) of seven heavy metals (Cu, Zn, Ni, Cr, Pb, Cd, Mn) on the rainbow trout Oncorhynchus mykiss at all stages of development (embryos, larvae, adults) were investigated based on the annual average concentrations of these metals in cooling waste waters discharging from Ignalina Nuclear Power Plant (Lithuania) into the Drūk?iai lake. According to mortality parameters, the most sensitive to HMMM were larvae, although no significant differences between the sensitivity of embryos and adult fish to HMMM were found. Maximal toxic effect of HMMM was observed during the hatching period. Long-term exposure to sublethal concentrations of HMMM affected embryo development, growth of larvae, their cardio-respiratory and behavioural responses, induced significant changes in morphological, morpho-physiological, physiological and haematological parameters of adult fish. Respiratory responses and growth parameters of fish were found to be the most sensitive to low concentrations of HMMM. Adult fish were capable of detecting and avoiding low, sublethal concentrations of HMMM. Heavy metals in a mixture at low concentrations were more toxic than single ones. According to the background of the damages induced by HMMM, after-effects in a fish organism, as well as in a whole population, can be predicted.     

Photochemical degradation and mineralization of 4-chlorophenol

INTENTION, GOAL, SCOPE, BACKGROUND: Since the intermediate products of some compounds can be more toxic and/or refractory than the original compund itself, the development of innovative oxidation technologies which are capable of transforming such compounds into harmless end products, is gaining more importance every day. Advanced oxidation processes are one of these technologies. However, it is necessary to optimize the reaction conditions for these technologies in order to be cost-effective. OBJECTIVE: The main objectives of this study were to see if complete mineralization of 4-chlorophenol with AOPs was possible using low pressure mercury vapour lamps, to make a comparison of different AOPs, to observe the effect of the existence of other ions on degradation efficiency and to optimize reaction conditions. METHODS: In this study, photochemical advanced oxidation processes (AOPs) utilizing the combinations of UV, UV/H2O2 and UV/H2O2/Fe2+ (photo-Fenton process) were investigated in labscale experiments for the degradation and mineralization of 4-chlorophenol. Evaluations were based on the reduction of 4-chlorophenol and total organic carbon. The major parameters investigated were the initial 4-chlorophenol concentration, pH, hydrogen peroxide and iron doses and the effect of the presence of radical scavengers. RESULTS AND DISCUSSION: It was observed that the 4-chlorophenol degradation efficiency decreased with increasing concentration and was independent of the initial solution pH in the UV process. 4-chlorophenol oxidation efficiency for an initial concentration of 100 mgl(-1) was around 89% after 300 min of irradiation in the UV process and no mineralization was achieved. The efficiency increased to > 99% with the UV/H2O2 process in 60 min of irradiation, although mineralization efficiency was still around 75% after 300 min of reaction time. Although the H2O2/4-CP molar ratio was kept constant, increasing initial 4-chlorophenol concentration decreased the treatment efficiency. It was observed that basic pHs were favourable in the UV/H2O2 process. The results showed that the photo-Fenton process was the most effective treatment process under acidic conditions. Complete disappearance of 100 mgl(-1) of 4-chlorophenol was achieved in 2.5 min and almost complete mineralization (96%) was also possible after only 45 min of irradiation. The efficiency was negatively affected from H2O2 in the UV/H2O2 process and Fe2+ in the photo-Fenton process over a certain concentration. The highest negative effect was observed with solutions containing PO4 triple ions. Required reaction times for complete disappearance of 100 mgl(-1) 4-chlorophenol increased from 2.5 min for an ion-free solution to 30 min for solutions containing 100 mgl(-1) PO4 triple ion and from 45 min to more than 240 min for complete mineralization. The photodegradation of 4-chlorophenol was found to follow the first-order law. CONCLUSION: The results of this study showed that UV irradiation alone can degrade 4-CP, although at very slow rates, but cannot mineralize the compound. The addition of hydrogen peroxide to the system, the so-called UV/H2O2 process, significantly enhances the 4-CP degradation rate, but still requires relatively long reaction periods for complete mineralization. The photo-Fenton process, the combination of homogeneous systems of UV/H2O2/Fe2+ compounds, produces the highest photochemical elimination rate of 4-CP and complete mineralization is possible to achieve in quite shorter reaction periods when compared with the UV/H2O2 process. RECOMMENDATIONS AND OUTLOOK: It is more cost effective to use these processes for only purposes such as toxicity reduction, enhancement of biodegradability, decolorization and micropollutant removal. However the most important point is the optimization of the reaction conditions for the process of concern. In such a case, AOPs can be used in combination with a biological treatment systems as a pre- or post treatment unit providing the cheapest treatment option. The AOP applied, for instance, can be used for toxicity reduction and the biological unit for chemical oxygen demand (COD) removal.     

A fair comparison between the spatial scan and the Besag–Newell Disease clustering tests

Routine surveillance of a large geographic region for clusters of adverse health events, particularly cancers, often involves small area health data, possibly controlling for exposure information. Many different methods have been proposed to test for the presence of geographical clusters. Two of the most popular methods are the spatial scan method proposed by Kulldorff and that using a fixed number of cases within scanning circles proposed by Besag and Newell. Although the second test is very popular, it has some difficulties. While the scan test controls for the multiple testing problem, the Besag and Newell test does not. Additionally, the latter method requires the setting of several tuning parameters whose values affect the test performance and are subjectively chosen by the user. This creates a difficulty to make a fair comparison between the two methods and it explains why there have been few formal studies evaluating their relative performances. In this paper, we modify the Besag and Newell test allowing for the control of the error type I probability and compare its power with respect to that of the spatial scan test. We used data sets from a publicly available simulated benchmark. We found that the two methods have similar results, except for clusters located in sparsely populated regions, where the spatial scan method presented a better performance.     

Effects of temperature on testicular cycle of wild birds Black headed munia and Spotted munia

A long term investigation was made on the effects of temperature in the reproduction of tropical wild birds, Black headed munia, Munia malacca and Spotted munia, Lonchura punctulata. In Spotted munia delayed gonadal development as well as regression were observed in 12 degrees C treated group. In 20 degrees C treated birds the testicular volume was significantly less in the month of September and October and was significantly more in November compared to the corresponding control values. In 27 degrees C treated birds delay in testicular development was observed. In Black headed munia delayed gonadal development and regression was observed in 12 degrees C and 20 degrees C treated groups. But maximum gonadal development Delayed regression was also noticed in 20 degrees C group. In 27 degrees C treated group an inhibition of the testicular development was noticed during progressive phase (September). Present findings suggest that neither temperature nor continuous illumination could alter the circannual nature of testicular cycle in spotted munia indicating that temperature acts only as supplementary factor in the reproduction of these two bird models. We further suggest that temperature effects are mediated through changes in thyroxine levels.     

High Spatial and Temporal Variability of Dry Deposition in a Coastal Region

A real meteorological situation characterized by strong spatial and temporal variability of the meteorological fields in a coastal region of eastern Denmark is examined in view of the transport of a passive tracer and dry deposition. Model simulations using a full mesoscale NWP model (COAMPS^TM) at different horizontal resolutions are performed. A realistic simulation showed that the differences in the amount of dry deposited matter can reach one order of magnitude and larger, during the period of one afternoon, depending on the model horizontal resolution. In addition, the results of an idealized experiment with straight coastline indicate that the horizontal model resolution alone is responsible for most of the differences. This study confirms the importance of high spatial and temporal resolution modelling for environmental applications.