Experimental research on emission and removal of dioxins in flue gas from a co-combustion of MSW and coal incinerator

This paper describes the experimental study of dioxins removal from flue gas from a co-combustion municipal solid waste and coal incinerator by means of a fluidized absorption tower and a fabric filter. A test rig has been set up. The flow rate of flue gas of the test rig is 150-2000 m3/h. The system was composed of a humidification and cooling system, an absorption tower, a demister, a slurry make-up tank, a desilter, a fabric filter and a measurement system. The total height of the absorption tower was 6.5m, and the diameter of the reactor pool was 1.2 m. When the absorbent was 1% limestone slurry, the recirculation ratio was 3, the jet rate was 5-15 m/s and the submerged depth of the bubbling pipe under the slurry was 0.14 m, the removal efficiency for dioxins was 99.35%. The concentration of dioxins in the treated flue gas was 0.1573 x 10(-13)kg/Nm3 and the concentration of oxygen was 11%. This concentration is comparable to the emission standards of other developed countries.     

分子印迹技术在环境科学领域中的应用

分子印迹技术（MIT）是一门新兴的边缘科学技术,它的产生与发展为环境科学打开了又一视角。介绍了MIT的产生与发展及基本原理,综述了MIT在环境科学领域中的应用,主要包括MIT在固相萃取、膜分离、色谱分析、传感器及分子印迹聚合物作为催化剂在环境修复中的应用。     

水环境退化经济损失的计量方法及其应用

水环境退化较难以市场价格方式体现,是绿色GDP核算的一大难点.分析了影响水环境退化的社会经济因素、自然因素,在此基础上,构建了水环境退化的计量模型,并将社会经济发展的阶段性特征、水资源供需矛盾、降水补给变异特征和水质状况纳入模型中,采用不同参数进行描述,以保证模型的逻辑完备性和计算的简洁性.在湖州市绿色GDP核算过程中,采用该模型分别计算各县区2001-2004年水环境退化的经济损失.这些损失与当地水资源供需矛盾、水污染状况、社会经济发展等因素变化状况相符,准确反映了湖州市水环境退化的实际状况.结果表明,水环境退化的经济损失,除水污染程度外,还受到社会经济因素和降水补给等自然因素的影响.      

一株反硝化菌的分离鉴定和系统发育分析

从反硝化反应器中分离到一株异养型兼氧反硝化细菌,命名为菌株JIN1,分离菌株为革兰氏染色阴性杆状。茵落颜色为乳白色。该菌株能以硝酸钠为唯一氮源进行反硝化作用并产生亚硝酸。部分长度的16SrDNA序列分析表明,分离菌株JIN1与Aquaspirillum菌具有99%相似,与Microvirgulaaerodenitrificans菌具有99%相似。其生化性状与Aquaspirillum菌不相符。系统发育学分析表明菌株JIN1与Microvirgulaaerodenitrificans菌关系最近。故确认菌株JIN1属Microvirgulaaerodenitrificans菌。     

SBR法处理豆制品废水工艺条件的研究

用SBR法处理豆制品废水的试验表明,该系统具有较好的抗负荷冲击能力,进水COD在300～2000 mg/L之间变化,对系统不造成任何影响;考察了曝气时间、曝气量和污泥浓度等对去除效果的影响,试验结果表明,曝气时间和曝气量对处理效果影响很大,确定该反应系统最佳曝气时间是8 h,适宜的曝气量是800 L/h,而污泥浓度控制在4000 mg/L左右时,处理效率最高,采用进水顶出水的排水方式是可行的,确定系统的最佳排水比是3/5.厌氧段的插入可以减少剩余污泥的产量.     

吸附模式对有机物光催化降解的影响2.H-酸在TiO2表面的光催化降解途径

水溶液中H-酸通过磺酸基团吸附在TiO2表面,UV照射TiO2所产生的自由基首先进攻吸附在TiO2表面的磺酸基团,从而进一步导致萘环开环.pH 2.5条件下,虽然饱和吸附量较大,但由于H-酸仅通过一个磺酸基团吸附在TiO2表面,过程中产生的硫酸根速率较慢,最终的光降解速率也较慢.pH 5.0条件下,虽然饱和吸附量较小,但由于吸附在TiO2表面的两个磺酸基团同时受到来自TiO2表面自由基的进攻,过程中产生的硫酸根速率较快,最终的光降解速率也较快.吸附模式的差异是导致H-酸在不同pH值条件下光催化降解途径和速率差异的关键因素.     

医疗废物焚烧中二恶英的产生及控制

医疗废物的安全处置一直被世界各国所重视,我国自SARS灾难后,强化了医疗废物的治理力度。本文针对目前主要采用焚烧法处置医疗废物过程中二恶英的生成途径进行了论述,并结合二恶英的分子结构、毒性及危害提出了控制对策与建议。     

pH值与乙酸对易腐有机垃圾水解过程的抑制

通过外部添加水解酶比较和区分pH值和乙酸对水解的影响,结果表明:以固相挥发性固体和元素碳的减少以及液相有机碳的增加表征水解率,在pH=7时最大,144h的水解率可达66.9%;与pH=7相比,pH=8-9时,水解率降低8%-24%;pH=5-6,水解率降低40%-60%.20g·l-1乙酸的加入抑制了水解,在不同pH值条件下与不添加乙酸的水解相比,抑制程度为2%-35%,pH=7时乙酸的抑制最显著,可达35%.颗粒态物料的水解过程动力学符合Chen-Hashimoto公式.     

薄膜扩散梯度技术在重金属生物有效态监测中的应用

重金属生物有效性是评估重金属元素迁移性、生物可利用性和生态影响的关键参数。薄膜扩散梯度技术(DGT)是一种原位被动采样技术,因其具有原位富集性、形态选择性,可提供被监测物质在监测时间段内的平均浓度等优点,可作为生物对重金属摄取的模拟替代物对环境介质中重金属的生物可利用度进行预测,已被广泛应用于环境介质中重金属生物有效性的测定。研究主要介绍了DGT技术的原理、组成和特点,评述了其近年来在水体、土壤、沉积物中重金属生物有效态应用方面的新进展,提出了DGT技术未来要提高抗生物污染能力及寻找可与DGT技术联用的相关技术的观点。     

The impact of government subsidy and tax policy on the competitive decision-making of remanufacturing supply chains

In this paper, we consider a two-period competition model of a remanufacturing supply chain consisting of three members: a new product manufacturer, a recycler and a remanufacturer. The manufacturer supplies new products in the first period and the remanufacturer participates in the competition in the second period. We consider three scenarios in the second period: (1) there is no government subsidy in the competition; (2) there is only government subsidy in the competition; (3) there are both government subsidy and tax in the competition. First, we give the optimal decision-making of the manufacturer, the remanufacturer and the government in the three scenarios; second, we analyse changes in the decision-making of the manufacturer and remanufacturer in the three scenarios and compare their results. We analyse the effects of government subsidy and tax and their asymmetric use on manufacturers’ and remanufacturers’ decision-making variables and competitive performance. We also take consumer awareness of environmental protection into account and examine its impact on subjects’ decisions. Lastly, we operate a numerical example to show the results.