GIS罐体内部异物清理机器人的研发与应用

针对气体绝缘金属封闭开关设备( gas insulated switchgear, GIS)内部异物颗粒引起设备内部电场畸变,从而造成设备闪络故障问题,通过对异物颗粒的产生原因及影响因素进行分析,研制了一种GIS罐体内部异物颗粒清理机器人,实现了GIS设备内部可视化异物清理功能。应用结果表明:机器人检测不仅提高了750kV GIS内部缺陷检查的效率,而且保证了检测人员的安全,为GIS状态检修提供了有效技术支持。     

神经网络在低压脱扣装置选择上的应用

低压脱扣装置应用于环境复杂的场合, 选型不当易使得电力事故频发,不利于电力系统的可靠运行。通过分析影响低压脱扣选择的因素,利用Back Propagation神经网络进行建模,提出了一种低压脱扣装置自动选择预测方法,结果表明:该方法在准确性与可重复性.上与传统方法相比具有较大优势,在工程应用中有一定的参考作用。     

Characterization of hard- and softwood biochars pyrolyzed at high temperature

A wide range of waste biomass/waste wood feedstocks abundantly available at mine sites provide the opportunity to produce biochars for cost-effective improvement of mine tailings and contaminated land at metal mines. In the present study, soft- and hardwood biochars derived from pine and jarrah woods at high temperature (700 °C) were characterized for their physiochemical properties including chemical components, electrical conductivity, pH, zeta potential, cation-exchange capacity (CEC), alkalinity, BET surface area and surface morphology. Evaluating and comparing these characteristics with available data from the literature have affirmed the strong dictation of precursor type on the physiochemical properties of the biochars. The pine and jarrah wood feedstocks are mainly different in their proportions of cellulose, hemicellulose and lignin, resulting in biochars with heterogeneous physiochemical properties. The hardwood jarrah biochar exhibits much higher microporosity, alkalinity and electrostatic capacity than the softwood pine. Correlation analysis and principal component analysis also show a good correlation between CEC–BET–alkalinity, and alkalinity–ash content. These comprehensive characterization and analysis results on biochars’ properties from feedstocks of hardwood (from forest land clearance at mine construction) and waste pine wood (from mining operations) will provide a good guide for tailoring biochar functionalities for remediating metal mine tailings. The relatively inert high-temperature biochars can be stored for a long term at mine closure after decades of operations.     

BP-4的模拟生物降解特性研究

为研究紫外吸收剂2-羟基-4-甲氧基二苯甲酮-5-磺酸(BP-4)的最大生物降解能力,采用欧洲经济合作与发展组织(OECD)生物降解测试标准方法——303A模拟试验-污水好氧处理:活性污泥单元法,建立并进行了城市污水处理厂曝气池环境模拟试验。研究结果表明:在单一新鲜活性污泥作为接种物条件下,BP-4在第47天达到降解稳定期,溶解性有机碳(DOC)去除率平均值为36.90%±5.68%(n=18)。在以10种不同来源混合接种物条件下,BP-4在第41天达到降解稳定期,去除率平均值为33.11%±4.87%(n=17)。研究结果表明BP-4在环境中的降解能力有限,在本模拟方法试验条件下只能部分降解。     

太原市土壤六六六和滴滴涕的暴露格局及健康风险

为研究六六六(HCHs)和滴滴涕(DDTs)在太原市不同功能区土壤中的暴露格局、来源以及对周围人群的健康风险,在太原市化工区、灌区、矿区、生态区周边荒地土壤中进行采样,分析测定了土壤中HCHs和DDTs含量,根据太原市人群实际情况的暴露参数和USEPA的部分参数,对土壤HCHs和DDTs的健康风险进行评价。结果表明:1)太原市表层土壤中HCHs的平均含量大小依次为化工区>灌区>矿区>生态区;DDTs平均含量的大小依次为化工区>灌区>矿区>生态区,仅6%的HCHs和3%的DDTs和的平均残留水平均高于我国土壤质量标准一级标准,但均不超过二级标准值;2)土壤中HCHs残留主要源于历史上林丹的使用,DDTs残留则来源于历史和新污染源的共同影响;3)太原市表层土壤HCHs和DDTs致癌风险大小为化工园区>矿区>灌区>生态区。非致癌风险大小为化工区>矿区>灌区>生态区。3种暴露途径的在不同功能区的健康风险贡献率大小均为经口摄入>呼吸吸入>皮肤接触;综合来看太原市表层土壤中的HCHs和DDTs并未对人类造成非致癌风险,但有一定的致癌风险。本文的研究结果可为太原市土壤质量评价和环境污染防治提供科学指导,并对太原市人群的健康风险防治提供依据。     

稀有鮈鲫成体神经发生相关基因的分子克隆及序列分析

成体神经发生是脊椎动物中广泛存在的一种生物学特征。成体硬骨鱼类的脑展现出强烈的神经活性以及出色的脑修复能力,这使得硬骨鱼类成为研究成体神经发生和脑修复的一个理想的模型。本文克隆了成体稀有鮈鲫(Gobiocypris rarus)脑组织中神经发生及脑修复相关的hes5、pax6、sox11和prox1基因的部分c DNA序列并进行了序列分析。序列分析结果表明,pax6和sox11基因片段与斑马鱼(Danio rerio)对应的基因片段的同源性最高,分别为97%和94%;hes5基因与鲤鱼(Cyprinus carpio)相对应的基因片段的同源性最高,为92%;prox1基因在物种间的同源性最低。基于稀有鮈鲫和已知物种相应基因的核苷酸序列构建了系统发育树,发现稀有鮈鲫prox1基因与其他硬骨鱼类的亲缘关系最远。本文为进一步开展神经毒性类化学品对水生生物鱼类的成体神经毒性作用机制研究提供了分子生物学基础。     

Effective adsorbent for arsenic removal: core/shell structural nano zero-valent iron/manganese oxide

Recently, nano zero-valent iron (nZVI) has emerged as an effective adsorbent for the removal of arsenic from aqueous solutions. However, its use in various applications has suffered from reactivity loss resulting in a decreased efficiency. Thus, the aim of this study was to develop an effective arsenic adsorbent as a core/shell structural nZVI/manganese oxide (or nZVI/Mn oxide) to minimize the reactivity loss of the nZVI. As the major result, the arsenic adsorption capacities of the nZVI/Mn oxide for As(V) and As(III) were approximately two and three times higher than that of the nZVI, respectively. In addition, the As(V) removal efficiency of the nZVI/Mn oxide was maintained through 4 cycles of regeneration whereas that of the nZVI was decreased significantly. The enhanced reactivity and reusability of the nZVI/Mn oxide can be successfully explained by the synergistic interaction of the nZVI core and manganese oxide shell, in which the manganese oxides participate in oxidation reactions with corroded Fe²⁺ and subsequently retard the release of aqueous iron providing additional surface sites for arsenic adsorption. In summary, this study reports the successful fabrication of a core/shell nZVI/Mn oxide as an effective adsorbent for the removal of arsenic from aqueous solutions.     

Historical change of mercury pollution in remote Yongle archipelago, South China Sea

We collected three ornithogenic coral sand sedimentary profiles from Jinyin Island, Jinqing Island and Guangjin Island of Yongle archipelago, South China Sea and reconstructed the deposition flux of anthropogenic Hg over the past 700 years in the study area. On the whole, the anthropogenic Hg flux is relatively low; it remained at a low level before the Industrial Revolution with a small peak at about 1450-1550 AD, which may record the enhanced metallurgy activity in Ming Dynasty of China. During the 20th century, the deposition flux of anthropogenic Hg increased rapidly, but two troughs occurred during the periods around 1940s and 1970s, corresponding to the economic depression caused by World War II, Civil War in China (1945-1949), and the Culture Revolution (1966-1976) in China. Since the 1970s the deposition flux of anthropogenic Hg has been persistently increasing, apparently the result of fast economic development in East and Southeast Asia countries around South China Sea.     

Formation pathways of polychlorinated dibenzofurans (PCDFs) in sediments contaminated with PCBs during the thermal desorption process

Thermal desorption has attracted considerable interest as a remediation technology for the removal of dioxins and polychlorinated biphenyls (PCBs) from contaminated soils and sediments. Although several research groups have confirmed that polychlorinated dibenzofurans (PCDFs) are formed from PCBs during the thermal desorption of sediments contaminated with PCB, the formation pathways remain poorly understood. Herein, thermal desorption has been used to develop a greater understanding of the formation pathways of PCDFs from sediments contaminated with PCBs. PCB decomposition experiments of sediments contaminated with PCBs were performed over 5 min at 450 °C with a gas composition of 10% O(2)/90% N(2), either in the absence (Run 1) or presence (Run 2-4) of one of three different (13)C(12)-labeled PCB individual standards. The results of Run 1 showed that 99.96% of PCBs and 98.40% of polychlorinated dibenzo-p-dioxins (PCDDs) in the treated sediments had decomposed, whereas the concentration levels of PCDFs had increased by a factor of 31. The addition of different (13)C(12)-labeled PCBs to the sediment sample yielded different (13)C(12)-PCDFs isomer patterns, with formation pathways including loss of ortho-Cl(2), loss of HCl involving a 2,3-chlorine shift, loss of ortho-H(2) and dechlorination.