中国红色粘土型金矿成矿特征

中国的红色粘土型金矿是 90年代初发现并开始研究的 ,基本上产于南方特别是西南地区。由于特殊的地质构造条件和气候、地貌条件 ,该类型金矿与国外的红土型金矿存在明显的差异 :红色粘土型金矿剖面发育差 ,红土化程度低 ;对源岩依存度高 ;铁铝含量低、硅含量高 ;矿石处在富粘土矿物阶段 ,少见三水铝石 ,一般为伊利石和高岭石共存。金在红色粘土中以微细粒分散形式存在 ,且在红色粘土剖面中由于表生淋滤作用而发生活化、迁移和再沉淀。     

Control of distal retinal pigment migration in the fiddler crab Uca pugilator

Several concentrations of extracts prepared from the eyestalks of a specimen of Uca pugilator were injected into other U. pugilator individuals. The distal pigment of the eyes first became light adapted and then dark adapted, the whole process lasting 6 h. The mean integrated response for light adaptation increased progressively up to the highest tested extract (3 eyestalk equivalents/dose), but with the darkadapting response the maximal effect was produced by the extract containing 2 eyestalk equivalents/dose. Gel filtration of eyestalk extracts in Sephadex G-50 showed that the fractions associated with greatest light adaptation were also associated with greatest pigment dispersion in the melanophores. Almost no light or dark adaptation of the retinal pigment resulted from injections of eyestalk extracts treated with -chymotrypsin which supports the interpretation that these substances are polypeptides of neurosecretory origin.Supported by Grant GB-7595 X from the National Science Foundation.     

Downcore sulphur isotope ratios and diatom inferred pH in an artificially acidified Canadian shield lake

Three gravity cores were removed from near the deepest point in Lake 223 on 9 June 1984, eight years after the Experimental Lakes Area (ELA) staff began the artificial acidification of the lake with sulphuric acid. The first of these cores was analysed for diatoms and pollen stratigraphy while the second and third were analysed for downcore sulphur isotope ratios (H. Thode) and downcore changes in sulphur reducing bacterial densities (S. Rao). Sediment core chronologies were based on lead-210 and cesium-137 data (R. Anderson) and the Ambrosia pollen rise (M. Dickman). Analysis of the first core to the depth of the Ambrosia pollen rise (9 cm) indicated that diatom inferred pH in Lake 223 at the time of the Ambrosia rise (circa 1890) was 6.8-7.0. At a sediment depth of 3 cm the diatom inferred pH was 6.7. Thereafter diatom inferred pH began a decline culminating in the present day (observed) pH range for 1984 (5.3-5.5). At a sediment depth of 1 cm, an increase in the abundance of two benthic alkalophilic diatoms occurred. The increase in the abundance of these diatoms was ascribed to an increase in hypolimnetic alkalinity following the artificial acidification of Lake 223. This is the first time that lake acidification has been linked to an increase in benthic alkalophilic diatoms associated with hypolimnetic alkalinity production following sulphate reduction. Sulphur in the anaerobic (black) sediment layers (0-1.5 cm) was isotopically light relative to the sulphur in the deeper layers. This was due to sulphur isotope fractionation resulting from the bacterial reduction of sulphate to hydrogen sulphide in the anaerobic portion of the water column. A jet black FeS-rich layer in the uppermost 1.5 cm of the lake's sediments was associated with an increase in the abundance of sulphate reducing bacteria (e.g. Desulfovibrio spp.).     

Rebuilding after the tsunami: getting it right

The practice of integrated coastal management (ICM) has matured sufficiently since its beginnings in the early 1980s to suggest a set of principles that could be used to guide the massive investments that will be made over the next several years to rehabilitate and reconstruct the thousands of kilometers of coastlines devastated by the 26 December 2004 tsunami. We offer six principles to guide what can be done to make coastal communities less vulnerable, to improve the conditions of the poor, and to avoid repeating the mistaken judgements that have been made in the past about how shorelines are allocated and developed. We then offer a set of five principles to guide how action plans are formulated and implemented. These stress the critical importance of tailoring principles to the unique conditions and needs of each place. The roles of national government in setting policies to guide a decentralized planning and decision-making process are distinguished from a negotiation process that engages the people of the place in a bottom-up application of ICM good practices.     

Combinations of Azadirachta indica and Cedrus deodara oil with piperonyl butoxide, MGK-264 and Embelia ribes against Lymnaea acuminata

The binary and tertiary combinations of plant-derived molluscicides Azadirachta indica and Cedrus deodara oil with synergists MGK-264, piperonyl butoxide (PB) and fruit powder of Embelia ribes were used against the Lymnaea acuminata. It was observed that the toxic effects of these mixtures were time- and dose-dependent. The binary and tertiary mixtures of plant-derived molluscicides with synergists were more toxic with respect to the single treatment of the plant-derived molluscicides. Maximum synergistic action in binary and tertiary combinations was found in A. indica + C. deodara oil and A. indica + PB + C. deodara in 1:7 and 1:5:7 ratio, respectively.     

Spatial and temporal variations in the trace elemental data over the northeastern United States

Time series of trace elemental concentrations (14 species) of atmospheric fine particles measured in the northeastern United States between 1988 and 1998 are analyzed for spatial and temporal variations. The influence of synoptic-scale systems to the transport and accumulation of pollutants can be investigated successfully if the short-term fluctuations (i.e. weather-induced variations) embedded in the time series of pollutant concentrations are separated from the original time series. The spatial short-term correlation coefficients for Al, Br, Fe, Se, and Zn permit good predictions of pollutant concentrations up to distances of about 350 km from a given monitor. The species correlation matrices for individual sites reveal that As, Br, Se, and Zn are highly correlated in New York State, while Fe, Mn, and V show also strong correlations, suggesting the commonality of source regions for these industrial and urban pollutants impacting New York.     

Thermal and spectroscopic studies on sorption of nickel(II) ion on protonated baker's yeast

Protonated form (Hy) of yeast was subjected to thermal analysis (TGA and DTG) in the temperature range 60–800 °C. Chemically bound water volatilizes around 200 °C and the matrix undergoes extensive oxidative decomposition at 450 °C, the weight loss reaching 75% at 800 °C. The sorption capacity of the matrix for nickel(II) ion increases on heat treatment from 60 to 200 °C (from 16.9 to 25.0 mg/g), but was reduced on heating to higher temperatures at an initial nickel(II) ion concentration of 1200 mg/g. The FTIR spectra of Hy and nickel(II) ion saturated yeast, indicated that biosorption occurs on the sugar and nucleic acid regions, possibly involving –COOH and –NH groups.     

Assessing the impacts of partial mass depletion in DNAPL source zones I. Analytical modeling of source strength functions and plume response

Analytical solutions are developed for approximating the time-dependent contaminant discharge from DNAPL source zones undergoing dissolution and other decay processes. The source functions assume a power relationship between source mass and chemical discharge and can consider partial DNAPL source remediation (depletion) at any time after the initial DNAPL release. The source functions are used as a time-dependent boundary condition in an idealized chemical transport model to develop leading order approximations of the plume response to DNAPL source removal. The results suggest that partial DNAPL remediation does not tend to have a dramatic impact on the maximum extent of the plume if very low concentration values are used to define the plume boundaries. However, the solutions show that partial DNAPL removal from the source zone is likely to lead to large reductions in plume concentrations and mass, and it reduces the longevity of the plume. When the mass discharge from the source zone is linearly related to the DNAPL mass, it is shown that partial DNAPL depletion leads to linearly proportional reductions in the plume mass and concentrations.     

Assessment of contribution of SO2 and NO2 from different sources in Jamshedpur region, India

Contribution of pollution from different types of sources in Jamshedpur, the steel city of India, has been estimated in winter 1993 using two approaches in order to delineate and prioritize air quality management strategies for the development of region in an environmental friendly manner. The first approach mainly aims at preparation of a comprehensive emission inventory and estimation of spatial distribution of pollution loads in terms of SO₂ and NO₂ from different types of industrial, domestic and vehicular sources in the region. The results indicate that industrial sources account for 77% and 68% of the total emissions of SO₂ and NO₂, respectively, in the region, whereas vehicular emissions contributed to about 28% of the total NO₂ emissions. In the second approach, contribution of these sources to ambient air quality levels to which the people are exposed to, was assessed through air pollution dispersion modelling. Ambient concentration levels of SO₂ and NO₂ have been predicted in winter season using the ISCST3 model. The analysis indicates that emissions from industrial sources are responsible for more than 50% of the total SO₂ and NO₂ concentration levels. Vehicular activities contributed to about 40% of NO₂ pollution and domestic fuel combustion contributed to about 38% of SO₂ pollution. Predicted 24-h concentrations were compared with measured concentrations at 11 ambient air monitoring stations and good agreement was noted between the two values. In-depth zone-wise analysis of the above indicates that for effective air quality management, industrial source emissions should be given highest priority, followed by vehicular and domestic sources in Jamshedpur region.     

Stabilization and solidification of metal-laden wastes by compaction and magnesium phosphate-based binder

Bench-scale and full-scale investigations of waste stabilization and volume reduction were conducted using spiked soil and ash wastes containing heavy metals such as Cd, Cr, Pb, Ni, and Hg. The waste streams were stabilized and solidified using chemically bonded phosphate ceramic (CBPC) binder, and then compacted by either uniaxial or harmonic press for volume reduction. The physical properties of the final waste forms were determined by measuring volume reduction, density, porosity, and compressive strength. The leachability of heavy metals in the final waste forms was determined by a toxicity characteristic leaching procedure (TCLP) test and a 90-day immersion test (ANS 16.1). The structural composition and nature of waste forms were determined by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. CBPC binder and compaction can achieve 80-wt% waste loading and 39-47% reduction in waste volume. Compressive strength of final waste forms ranged from 1500 to 2000 psi. TCLP testing of waste forms showed that all heavy metals except Hg passed the TCLP limits using the phosphate-based binder. When Na2S was added to the binder, the waste forms also passed TCLP limits for Hg. Long-term leachability resistance of the final waste forms was achieved for all metals in both soil and ash wastes, and the leachability index was approximately 14. XRD patterns of waste forms indicated vermiculite in the ash waste was chemically incorporated into the CBPC matrix. SEM showed that waste forms are layered when compacted by uniaxial press and are homogeneous when compacted by harmonic press.