14C-生物碱在模拟水环境中暴露行为的研究

本文采用同位素示踪技术和室内模拟微生境研究了“C-盐酸脱廷胡索碱在好氧、厌氧水环境中的行为;对水、绿藻、溞及底泥中的残留量进行了分析:并用TLC分离出了水体及底泥中的转化产物,结果表明,该生物碱进入水环境后向底泥相转移是其主要迁移途径,最终在底泥上的残留量占85％以上,光及底泥微生物对该生物碱的转化起了一定作用。     

Predicting the compressibility behaviour of tire shred samples for landfill applications

Tire shreds have been used as an alternative to crushed stones (gravel) as drainage media in landfill leachate collection systems. The highly compressible nature of tire shreds (25-47% axial strain on vertical stress applications of 20-700 kPa) may reduce the thickness of the tire shred drainage layer to less than 300 mm (minimum design requirement) during the life of the municipal solid waste landfill. There hence exists a need to predict axial strains of tire shred samples in response to vertical stress applications so that the initial thickness of the tire shred drainage layer can be corrected for compression. The present study performs one-dimensional compressibility tests on four tire shred samples and compares the results with stress/strain curves from other studies. The stress/strain curves are developed into charts for choosing the correct initial thickness of tire shred layers that maintain the minimum thickness of 300 mm throughout the life of the landfill. The charts are developed for a range of vertical stresses based on the design height of municipal waste cell and bulk unit weight of municipal waste. Experimental results also showed that despite experiencing large axial strains, the average permeability of the tire shred sample consistently remained two to three orders of magnitude higher than the design performance criterion of 0.01cm/s for landfill drainage layers. Laboratory experiments, however, need to verify whether long-term chemical and bio-chemical reactions between landfill leachate and the tire shred layer will deteriorate their mechanical functions (hydraulic conductivity, compressibility, strength) beyond permissible limits for geotechnical applications.     

Processing of metallurgical residues by flotation - bench-scale studies on two industrial products

Resource recovery from two metallurgical residues by flotation was investigated applying an electrostatic model to select initial conditions. The first, a sulphation roast/water leach residue, was processed to float lead sulphate, comparing dodecylamine and xanthate collectors. From the second, a neutralization residue, gypsum, was recovered by reverse flotation of ferric hydroxide, comparing oleate and sulphonate collectors. In both cases, further upgrading by acid leaching was considered.     

Application of best subset method for river water quality modeling: A study on Godavari River,India

The utilization of water quality analysis to inform optimal decision-making is imperative to achieve sustainable management of river water quality. A multitude of research works in the past has focused on river water quality modeling. Despite being a precise statistical regression technique that allows for fitting separate models for all potential combinations of predictors and selecting the optimal subset model, the application of best subset method in river water quality modeling is not widely adopted. The current research aims to validate the use of best subset method in evaluating the water quality parameters of the Godavari River, one of the largest rivers in India, by developing regression equations for different combinations of its physicochemical parameters. The study involves in formulating best subset regression equations to estimate the concentrations of river water quality parameters while also identifying and quantifying their variations. A total of 17 water quality parameters are analyzed at 13 monitoring sites using 13 years (1993–2005) of observed data for the monsoon (June–October) period and post-monsoon (November–February) period. The final subset model is selected among model combinations that are developed for each year's dataset through widely used statistical criteria such as R², F value, adjusted R²_a, AIC_c, and RSS. The final best subset model across all parameters exhibits R² values surpassing 0.8, indicating that the models possess the ability to account for over 80% of the variations in the concentrations of dependent parameters. Therefore, the findings demonstrated the appropriateness of this method in evaluating the water quality parameters in extensive rivers. This work is very useful for decision-making and in the management of river water quality for its sustainable use in the study area.     

Effectiveness of porous covers for control of ammonia, reduced sulfur compounds, total hydrocarbons, selected volatile organic compounds, and odor from hog manure storage lagoons

Anaerobic lagoons are a major source of odor at concentrated animal feeding operations. Seven different kinds of artificial (geotextile and polyethylene foam) and natural (straw and redwood) permeable lagoon covers were evaluated for their potential to reduce odorous emissions generated by anaerobic waste lagoons. A novel floating sampling raft was constructed and used to simultaneously evaluate the effectiveness of lagoon covers on an operating swine waste lagoon. The air collected from the raft was evaluated for odor, total reduced sulfur (TRS) compounds, ammonia, total hydrocarbons, dimethyldisulfide, and trimethylamine. The emission rates from the lagoon were highly variable both temporally and spatially. All of the lagoon covers substantially reduced TRS emissions and odor. Geotextile fabric and a recycled foam cover exhibited the greatest reduction in total hydrocarbon emissions; natural covers were less effective. Because of consistently low emission rates of ammonia, no statistically significant reduction of ammonia emissions were observed from any of the lagoon covers.     

Hydrocarbon Uptake by Roots of Vicia faba (Fabaceae)

Vicia faba was grown in crude oil polluted soil and its roots were extracted for the detection and estimation of hydrocarbons. Saturated and unsaturated Aliphatic Hydrocarbons (AHs) ranging from C₂₂ to C₃₆ were identified in AHs fraction. However, PAHs were not present in the same extract. This could be due to the fact that PAHs being toxic compounds are not accumulated in the plant root extracts of V. faba grown in crude oil polluted soil. Three phytoalexins were identified and estimated by mass spectrometric analysis in the root extracts of V. faba. These three compounds are 2-t-butyl-4-(dimethyl benzyl) phenol, 2, 4-bis (dimethyl benzyl) phenol and 2,4-bis (dimethyl benzyl)-6-butyl phenol. These phenolics in V. faba are being reported for the first time. These compounds are presumably elicited as a direct stress on crude oil hydrocarbons on the roots of this plant.     

Facile and Sensitive Spectrophotometric Determination of Carbosulfan in Formulations and Environmental Samples

Facile, selective and sensitive spectrophotometric method has been developed for the determination of carbosulfan in insecticidal formulations, fortified water, food grains, agriculture wastewater and soil samples with newly synthesized reagents. The method was based on acid and alkaline hydrolysis of the carbosulfan pesticide, and the resultant hydrolysis product of carbosulfan was coupled with 2,6-dibromo-4-methylaniline to give a yellow color product with λ _max of 464 nm or interaction with 2,6-dibromo-4-nitroaniline to produce yellow colored product with λ _max of 408 nm or coupling with 2,4,6-tribromoaniline to form red colored product has a λ _max of 471 nm. Under optimal conditions, Beer’s law range for 2,6-dibromo-4-methylaniline (DBMA) was found to be 0.2–12.0 μg ml⁻¹, 0.6–16.0 μg ml⁻¹ for 2,6-dibromo-4-nitroaniline (DBNA) and 0.4–15.0 μg ml⁻¹ for 2,4,6-tribromoaniline (TBA). The molar absorptivity of the color systems were found to be 3.112 × 10⁴ l mol⁻¹ cm⁻¹ for DBMA, 3.214 × 10⁴ l mol⁻¹ cm⁻¹ for DBNA and 3.881 × 10⁴ l mol⁻¹ cm⁻¹ for TBA. Sandell’s of the color reactions are 0.013 μg cm⁻² (DBMA), 0.012 μg cm⁻² (DBNA) and 0.011 μg cm⁻² (TBA) respectively. The effect of the non-target species on the determination of carbosulfan was studied to enhance the selectivity of the proposed methods. The formation of colored derivatives with the coupling agents is instantaneous and stable for 28, 30, and 26 h. Performance of the proposed methods were compared statistically in terms Student’s F and t-tests with the reported methods. An erratum to this article can be found at     

Biodegradability of leathers through anaerobic pathway

Leather processing generates huge amounts of both solid and liquid wastes. The management of solid wastes, especially tanned leather waste, is a challenging problem faced by tanners. Hence, studies on biodegradability of leather become imperative. In this present work, biodegradability of untanned, chrome tanned and vegetable tanned leather under anaerobic conditions has been addressed. Two different sources of anaerobes have been used for this purpose. The effect of detanning as a pretreatment method before subjecting the leather to biodegradation has also been studied. It has been found that vegetable tanned leather leads to more gas production than chrome tanned leather. Mixed anaerobic isolates when employed as an inoculum are able to degrade the soluble organics of vegetable tanned material and thus exhibit an increased level of gas production during the initial days, compared to the results of the treatments that received the anaerobic sludge. With chrome tanned materials, there was not much change in the volume of the gas produced from the two different sources. It has been found that detanning tends to improve the biodegradability of both types of leathers.