Indicator-Based Approach for Assessing the Vulnerability of Freshwater Resources in the Bagmati River Basin,Nepal

To assess the vulnerability of water resources in the Bagmati River Basin in Nepal, this paper adopts an indicator-based approach wherein vulnerability is expressed as a function of water stress and adaptive capacity. Water stress encompasses indicators of water resources variation, scarcity, and exploitation and water pollution, whereas adaptive capacity covers indicators of natural, physical, human resource, and economic capacities. Based on the evaluation of eleven indicators, which were aggregated into eight vulnerability parameters, an increasingly stressful situation and lack of adaptive capacity became evident. Considerable spatial variation in indicator values suggests differential policy options. While the northern parts need attention to reduce pollution loading and conserve vegetation cover, the southern parts need improvements in physical capacity, i.e. water infrastructures. The comprehensive and easily interpretable findings of the study are expected to help decision makers reach sound solutions to reduce freshwater resources vulnerability in the Bagmati River Basin, Nepal. With its inherent flexibility, the approach has demonstrated its potential for application in different times and areas for monitoring and comparison purposes.     

Study of ultrasonic assisted cryogenically cooled EDM process using sintered (Cu–TiC) tooltip

In most EDM operations, the maximum contribution in the total operation cost is the tool cost. Electrode wear is a major problem in EDM process. Therefore, in this paper, the process performance of sintered copper (Cu)–titanium carbide (TiC) electrode tip in ultrasonic assisted cryogenically cooled electrical discharge machining (UACEDM) has been studied. The performance parameters studied in this paper are electrode wear ratio (EWR), material removal rate (MRR), surface roughness (SR), out of roundness and surface integrity. The process parameters considered in this study are discharge current, pulse on time, duty cycle and gap voltage. Cermet was fabricated, having copper content of 75% and titanium carbide content of 25%, by mixing, pressing, and sintering. The performance of the newly formed cermet electrode tip is compared with conventional copper electrode tip for UACEDM process and analyzed. It has been observed that EWR and out of roundness decreases when cermet electrode tip is used as compared to conventional tooltip. It has also been observed that MRR and SR increase when cermet tooltip is used. The surface cracks density and crack width on workpiece machined by cermet tooltip have been found to be lesser as compared to the specimen machined by conventional tooltip.     

Discussion of “Mahmodinia,S., & Javan,M. (2021). Vortical structures,entrainment and mixing process in the lateral discharge of the gravity current. Environmental Fluid Mechanics, 21(5), 1035–1067”

Environmental Fluid Mechanics - The authors of the discussed paper presented an interesting study of the lateral gravity currents for the different flow conditions. The authors showed the...     

Monitoring Of Vehicles Derived Particulates Using Magnetic Properties Of Leaves

Biomonitoring of vehicle-derived particulates is conducted by taking magnetic measurements of roadside tree leaves. Remanent magnetization (IRM_{300 mT}) of more than 400 Delbergia sissoo leaves was determined and IRM_{300 mT} normalized for the leaf area. The normalized 2-D magnetization as shown by results is dominantly controlled by the tree's distance to the road. The spatial and temporal variations of vehicle-derived particulates were mapped using magnetic analysis. 2D-magnetizations values were higher for leaves collected adjacent to major road sections than for those from village road suggesting vehicle emissions, rather than resuspended road dust, as the major cause of magnetic particles of roadside tree leaves. Vehicles derived particulates are responsible for tree leaf magnetism, and the leaf magnetizations values fall significantly from high values proximal to the roadside to lower values at the distal side. This suggests the ability of trees to reduce particulates concentrations in the atmosphere. The rainfall produces a net decrease in the leaf magnetic dust loadings.     

Characterization of two metal resistant Bacillus strains isolated from slag disposal site at Burnpur, India

Two strains of Bacillus sp. resistant to arsenate and lead designated as AsSP9 and PbSP6, respectively were isolated from the slag disposal site. They were identified to be related to Bacillus cereus cluster on the basis of 16S rDNA based sequence analysis and phenotypic characteristics. Both were rod-shaped (AsSP9, 2-5 microm and PbSP6, 2-4 microm), aerobic, salt tolerant (2-8% NaCI), endospore forming bacteria with minor differences like the AsSP9 showed sporangial bulging and PbSP6 had positive lipase activity. The temperature range for their growth was 20-40 degrees C and pH range 6.0-9.0 with an optimum temperature of 37 degrees C and pH of 7 for both strains. The principal nitrogen sources forAsSP9 and PbSP6 were DL-Tryptophan and L-Phenylalanine, respectively. The suitable carbon source forAsSP9 was lactose and for PbSP6 sucrose. The heavy metal accumulation efficiency was found to be 0.0047 mg g(-1) of dry mass forAsSP9 and 0.686 mg g(-1) of dry mass for PbSP6.     

Antioxidative responses in relation to growth of mustard (Brassica juncea cv. Pusa Jaikisan) plants exposed to hexavalent chromium

Effect of hexavalent chromium (Cr6+) was seen on Brassica juncea cv. Pusa Jaikisan grown for 15 days in hydroponic culture supplemented with 0.2, 2 and 20 microM Cr. The inhibitory response of Cr6+ on growth of B. juncea was concentration and time dependent. The stimulation of plant growth, observed in response to exposure to 0.2 microM Cr6+, during initial 5 days was reversed on prolonged treatment and at higher Cr6+ concentrations (2 and 20 microM Cr6+). Despite reduction in growth, chlorophyll content increased substantially on 15 days exposure to 20 microM Cr6+. Significant increases in lipid peroxidation and tissue concentration of H2O2 occurred in plants exposed to 2 and 20 microM Cr6+. Effect of Cr6+ on antioxidative enzymes in roots and leaves was differential. SOD and CAT activities at lower levels of Cr6+ supply remained higher all through the treatment. While APX was very susceptible to excess Cr6+, GR and GST increased at elevated levels of Cr6+. The results suggested Cr6+ induced depression in plant growth of B. juncea to be a function of increased cellular accumulation of Cr despite increase in the activities of some of the antioxidative enzymes.     

Limnochemistry and nutrient dynamics in Upper Lake, Bhopal, India

In limnetic ecosystem, water quality depends upon physical, chemical, and biological factors. Effects of temperature, light scattering, and absorption by suspended and dissolved matter, transport, and mixing of nutrients within the lake are the significant factors as far as water quality is concerned. Nutrient loading into the lake and internal cycling of nutrients is always a matter of concern and critical to number of processes. During the winter season, heat and momentum transfer at the lake surface and the temperature-density relation of water destabilize the water column and drive vertical mixing and transport processes. The deepening of the surface layer produces nutrient transfer from the hypolimnion into the euphotic zone of epilimnion. It may also resuspend sediments that would have settled under stratified conditions, or redistribute particles that may still be in suspension. Thus, there exists a complex connection between the hydrodynamics and water quality issues. Present study is an effort to understand how seasonal changes in the limnetic ecosystem regulate the limnochemistry and movement of nutrient. The study revealed that significant variations of nutrients and organic load were observed between epilimnion and hypolimnion during summer season, and the lake was found in hyper-eutrophic condition throughout the study period.     

Volatile Organic Compounds in Ambient Air at Four Residential Locations in Seoul, Korea

To investigate the environmental behavior of volatile organic compounds (VOCs) in urban areas, their concentrations were measured at four urban monitoring sites (namely, N, S, E, and W) in Seoul, Korea (February to December 2009). A total of 27 compounds were quantified that consist of four chemical groups: aromatic (AR), halogenated aromatic, halogenated paraffin, and halogenated olefin. Results were evaluated by focusing on these four functional groups just mentioned and their summation term as total VOC (TVOC) along with several individual species (mainly AR species, that is, benzene, toluene, ethylbenzene, and xylene). The highest concentration of chemical groups was found from AR (71.1±42.1?ppbC), while that for individual species confirmed the dominance of toluene (7.48±3.88?ppb). The analysis of spatial distribution indicated that high TVOC levels were recorded at sites N and W, while it was not so significant such as S and E in terms of TVOC budget. Seasonal variation of these VOCs was characterized by the peak values in December to reflect the combined effects of pronounced source activities and meteorological conditions. Analysis of spatial variations in VOC levels between the four urban sites indicated that their distributions are tightly affected by local source processes in each area.     

Heavy Metal Accumulation in Lichens from the Hetauda Industrial Area Narayani Zone Makwanpur District, Nepal

Lichen samples collected in and around Hetauda Industrial area,(HIA) Narayani zone, Makwanpur district, Nepal, were analyzedfor Cr, Ni, Pb, Zn, Ca, Mn, Fe, Si, and Al. The samples fromthe location inside the industrial area have higher levels ofmetal than the outside areas. Pyxine meissnerina growinginside the industrial area accumulated higher levels of all themetals analyzed.