Is PM10 mass measurement a reliable index for air quality assessment? An environmental study in a geographical area of north-eastern Italy

The aim of this study was to measure the concentration of some metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Ti) in PM(10) samples collected in one urban and one industrial site and to assess that PM(10) total mass measurement may be not sufficient as air quality index due to its complex composition. Metals were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and differential pulsed anodic stripping voltammetry (DPASV). The measured concentrations were used to calculate the content of metals in the PM(10) total mass, and to estimate the enrichment factors and the correlations between PM(10), metal concentrations and meteorological data for the two sites. The mean PM10 concentration during the sampling period in the urban site exceeded the annual European Union (EU) standard (40 microg/m(3)) and, for some sampling days, the daily EU standard (50 microg/m(3)) was also exceeded. In opposite, both EU standards were never exceeded in the industrial site. The overall metal content was nearly double in the industrial site compared to the urban one, and the mean Ni concentration exceeded the EU annual limit value (10 ng/m(3)). The metals with the highest enrichment factor were Cd, Cu, Ni and Pb for both sites, suggesting a dominant anthropogenic source for these metals. Metal concentrations were very low and typical of rural background during Christmas holidays, when factories were closed. PM(10) total mass measurement is not a sufficient air quality index since the metal content of PM(10) is not related to its total mass, especially in sites with industrial activities. This measurement should be associated with the analysis of toxic metals.     

Calculating losses of crops in Denmark caused by high ozone levels

In order to help guide air pollution legislation at the European level, harmful air pollution effects on agriculture crops and the consequent economic implications for policy have been studied for more than a decade. Ozone has been labeled as the most serious of the damaging air pollutants to agriculture, where growth rates and consequently yields are dramatically reduced. Quantifying the effects has formed a key factor in policymaking. Based on the widely held view that AOT40 (Accumulated exposure Over Threshold of 40 ppb) is a good indicator of ozone-induced damage, the Danish Eulerian Model (DEM) was used to compute reduced agriculture yields on a 50 km×50 km grid over Europe. In one set of scenarios, a ten year meteorological time series was combined with realistic emission inventories. In another, various idealized emission reduction scenarios are applied to the same meteorological time series. The results show substantial inter-annual variability in economic losses, due in most part to meteorological conditions which varied much more substantially than the emissions during the same period. It is further shown that, taking all uncertainties into account, estimates of ozone-induced economic losses require that a long meteorological record is included in the analysis, for statistical significance to be improved to acceptable levels for use in policy analysis. In this study, calculations were made for Europe as a whole, though this paper presents results relevant for Denmark.     

The Need for Scale Sensitive Approaches in Spatially Explicit Land Use Change Modeling

This paper introduces some of the issues that are relevant to the spatially explicit modeling of land use systems. A short overview is given of the ways and means in which a number of different land use change models describe the land use system. Specific attention is given to the empirical modeling approach used in the CLUE (Conversion of Land Use and its Effects) modeling framework. This approach is demonstrated for three case studies in China, Ecuador and the Atlantic Zone of Costa Rica. These case-studies illustrate the methodology for multi-scale analysis of land use driving factors and their application in spatially explicit modeling exercises. Model functioning, performance and limitations are discussed. The presented case-studies indicate that empirical modeling results can contribute to a better theoretic imbedding of land use change research in scale sensitive and integrated theories.     

Migratory crustaceans as biomonitors of metal pollution in their nursery areas. The Lesina lagoon (SE Italy) as a case study

Lichens collected in an unpolluted forest (background) in November 2004, transplanted at 41 sampling sites along the Madina-Tetteh Quarshie road, retrieved in February 2005 and analysed were found to contain higher concentrations of Manganese (Mn), Vanadium (V), lead, Cadmium (Cd), Chromium (Cr) and Nickel (Ni) than in the background area. Observations showed that of all the heavy metals studied, Manganese concentrations were highest at all sampling points with maximum values around a traffic light, an intersection and car fitting/mechanic workshops. Significant correlations were found between Ni and Mn, Mn and Cr and Mn and V. Statistical analysis also revealed a relatively even dispersion of the studied elements on the eastern side of the road than on the western side.     

Magnesium hydroxide bulk and colloid-associated 152Eu in an alkaline environment: colloid characterisation and sorption properties in the presence and absence of carbonate

The distribution of 152Eu between magnesium hydroxide bulk, colloids and solution has been assessed under alkaline conditions, such as those in nuclear fuel storage ponds. The colloidal phase has been characterised by two complementary methods: coupled ultrafiltration-ICP-AES and scanning electron microscopy. The quantity and the size distribution of the colloidal phase is strongly ionic strength-dependent. A decrease of the quantity of colloids, in particular the larger size ranges, has been observed with increasing ionic strength. Small colloids (1 kDa-10 kDa fraction) are predominant at all ionic strengths. The morphology of colloids, observed by field-emission gun scanning electron microscopy, appears to change from hexagonal prismatic (characteristic to the mineral) to spherical (energetically more favourable) as size decreases. The distribution of 152Eu between the solid and liquid/colloidal phases has been investigated at carbonate concentrations ranging from 0 to 10(-2) M by coupled ultrafiltration and gamma-spectrometry. Mg(OH)2 bulk appears to be a very strong sorbent for 152Eu, since complete sorption onto the bulk happens for carbonate concentrations as high as 10(-3) M. Scavenging of 152Eu by Mg(OH)2 colloids is negligible in the presence of Mg(OH)2 bulk. The distribution of 152Eu between liquid and colloidal phases has been investigated in the absence of bulk at various carbonate concentrations. A significant uptake of 152Eu by the colloids in solution has been observed, which decreases with increasing carbonate concentration. 152Eu appears to be mainly associated to the smallest colloids (1 kDa-10 kDa fraction). There is a strong correlation between the sorption properties and the surface area of the colloids.     

A Sensitivity Analysis of an Integrated Modelling Approach to Assess the Risk of Wind-borne Spread of Foot-and-mouth Disease Virus from Infected Premises

The sensitivity of an integrated model to assess the potential for wind-borne spread of foot-and-mouth disease (FMD) to variations in key parameters controlling different physical and biological processes was evaluated. The estimated number of farms at risk is sensitive to the virus strain used and the accompanying effective contact rate. The C Noville strain increased the estimated number of exposed farms ranked as high and medium risk of being infected by a factor of 5, compared to the baseline, based on the O UKG 2001 strain. The inclusion of a model for biological ageing of the virus can also have a significant effect on the concentration patterns arising from transport and dispersion of the virus. Its inclusion has the practical advantage of markedly reducing the time required for the calculations. The estimated number of farms affected by exposure to high and medium virus concentrations is not grossly sensitive to attenuation caused by temperature or relative humidity effects. Changes in susceptibility to infection, as determined by the parameter θ in the exposure-risk model, does not change the configuration of the virus plumes, but it does change the distribution of farms at risk by risk category. These findings suggest that a good understanding of characteristics (excretion rates from infected animals, susceptibility of different species to infection, virus survival, etc.) of the virus strain involved in an FMD outbreak is necessary to provide a reliable assessment of the risk of wind-borne spread. In the event of an incursion of FMD, provision for laboratory studies on the virus will be an essential component of the disease response and should be factored into contingency plans.

Cross-border response of mosses to heavy metal atmospheric deposition in Southeastern Bulgaria and European Turkey

First cross-border atmospheric pollution of 11 heavy metals and toxic elements assessed by Hypnum cupressiforme was reported for a part of Southeastern Europe (Southeastern Bulgaria and European Turkey). Moss monitoring technique followed the main requirements of European Moss Survey. Moss samples were collected in April 2006 both in Bulgaria and Turkey. Concentration of Al, As, Cd, Cr, Cu, Fe, Ni, Pb, Sb, V, and Zn were determined by ICP-AES. Interlaboratory parallel calibration (exchanged four moss samples from each country), standard reference moss materials (M2 and M3) results ensured the study. ANOVA showed no differences between measured results in both laboratories at the 99% confidence level. Principle Component Analyze proved two factors: F1 group of Al, As, Cd, Cr, Fe, Ni, and V and F2 of Cu, Pb, and Zn as main atmospheric pollutants. Results obtained showed approximately Cu and Pb high concentrations around Istanbul and Burgas and Zn pollution in Istanbul district. Arsenic cross-border atmospheric pollution in the study area of Southeastern Europe was found.     

An assessment of fluoride in the coastal aquifer of the Bara tract in Bharuch district, Gujarat (India)

The fluoride (F) concentration in the coastal aquifers of Bara tract in Bharuch district, Gujarat was determined by potentiometric method using an ion-selective electrode. The fluoride concentration in these aquifers varies between 0.060 to 3.51 mg/L. It was also found that F has a positive correlation with pH and HCO(3)(-) whereas negatively correlated with Ca(2+), indicating that high fluoride in ground water is associated with low calcium content. This suggests that the higher pH of water promotes the leaching of fluoride and thus affects the concentration of fluoride in the ground water. It was also found that there exists no relationship between F, EC, and ground water table from surface in the ground water.     

A comparison of techniques to sample salamander assemblages along highland streams of Maryland

Amphibians may be useful indicators of biological condition in small streams so determining which sampling technique maximizes encounters at the least cost and at the optimal time of year is important. Area constrained surveys (ACS), used by the Maryland Biological Stream Survey, were tested against cover board surveys, drift fences with pitfall and funnel traps, quadrat leaf litter searches, and leaf litter bags. Sixteen, 100 m-long sites were established in headwater streams in the Savage River State Forest in Garrett County, Maryland. Each technique was randomly assigned to a 25 m stream section within each overall sampling site, and sites were sampled once each month from May to October (2005) with additional sampling in March and April (2006). Area constrained surveys yielded means of 2.7 taxa and 14.9 total individuals per sampling visit, which was significantly higher than the yield of all other methods in all months except October and March, when yields were low for all techniques. Area constrained surveys were also significantly more cost-effective per taxon and per individual compared to all other methods. September produced the most taxa and individuals, October and March produced the least, and yields for April through August were similar to September. We employed removal sampling at four sites in April 2006, but abundance could not be estimated because a significant linear decrease in the accumulated catch versus catch per unit effort did not occur for three of the sites.