Protective role of zeolite on short- and long-term lead toxicity in the teleost fish Heteropneustes fossilis.

The high ion-exchange capacity of zeolite (sodium aluminium silicate) enhances the removal of lead from water, thus decreasing its availability to fish. Zeolites are very important in the field of environmental preservation due to the low cost and ecological compatibility. Zeolites can adsorb metallic ions by cation exchange reactions. Continuous exposure of the teleost fish Heteropneustes fossilis to sublethal concentrations of lead nitrate in water solution for short (35 days) and long (120 days) periods decreased both the soluble protein, RNA and glycogen contents in the liver and the body weight, but increased the cholesterol content. The presence of zeolite in the exposure solution decreased all of the adverse effects. In fish exposed to zeolite as feed additive, all the parameters improved in comparison to control fish, indicating that zeolites can be used safely in biological systems.     

Health impact assessment of auto rickshaw and cab drivers due to exposure to vehicular pollution in Delhi: an integrated approach

Environmental Science and Pollution Research - Vehicular emission is an important contributor to air pollution in the urban environment and impacts the health of commuters as well as drivers. The...     

Higher Cd adsorption on biogenic elemental selenium nanoparticles

Cadmium (Cd) is a carcinogenic metal contaminating the environment and ending up in wastewaters. There is therefore a need for improved methods to remove Cd by adsorption. Biogenic elemental selenium nanoparticles have been shown to adsorb Zn, Cu and Hg, but these nanoparticles have not been tested for Cd removal. Here we studied the time-dependency and adsorption isotherm of Cd onto biogenic elemental selenium nanoparticles using batch adsorption experiments. We measured ζ-potential values to assess the stability of nanoparticles loaded with Cd. Results show that the maximum Cd adsorption capacity amounts to 176.8 mg of Cd adsorbed per g of biogenic elemental selenium nanoparticles. The ζ-potential of Cd-loaded nanoparticles became less negative from ?32.7 to ?11.7 mV when exposing nanoparticles to an initial Cd concentration of 92.7 mg L^?1. This is the first study that demonstrates the high Cd uptake capacity of biogenic elemental selenium nanoparticles, of 176.8 mg g^?1, when compared to that of traditional adsorbents such as carboxyl-functionalized activated carbon, of 13.5 mg g^?1. An additional benefit is the easy solid–liquid separation by gravity settling due to coagulation of Cd-loaded biogenic elemental selenium nanoparticles.     

Chronic study of arsenic trioxide-induced hepatotoxicity in relation to arsenic liver accumulation in rats

This study measured activities of serum enzymes alkaline phosphatase, acid phosphatase, glutamic oxaloacetic transaminase (SGOT), and glutamic pyruvic transaminase (SGPT), markers of liver function in albino rats after continuous ingestion of arsenic trioxide (As₂0₃). For the study, treated animals were given AS₂O₃ (0.2 mg/100 g/day) orally for 180 days. After the completion of treatment, the blood was collected for the estimation of serum biochemical markers. The results obtained were compared with control group. Data showed a significant increase in SGOT and SGPT activity after 60 days of As₂0₃ administration. The level of alkaline phosphatase and acid phosphatase increased significantly after 90 and 120 days, respectively. Since the elevation of these serum enzymes is an indicator of hepatic damage, data indicate that As₂O₃ produces hepatotoxicity. When taken continuously, arsenic was also deposited in liver and blood and affected the enzymatic pathways. Total accumulated arsenic was determined by HG-AAS at 193.7 nm.     

Artificial neural network modeling of the river water quality—A case study

The paper describes the training, validation and application of artificial neural network (ANN) models for computing the dissolved oxygen (DO) and biochemical oxygen demand (BOD) levels in the Gomti river (India). Two ANN models were identified, validated and tested for the computation of DO and BOD concentrations in the Gomti river water. Both the models employed eleven input water quality variables measured in river water over a period of 10 years each month at eight different sites. The performance of the ANN models was assessed through the coefficient of determination (R²) (square of the correlation coefficient), root mean square error (RMSE) and bias computed from the measured and model computed values of the dependent variables. Goodness of the model fit to the data was also evaluated through the relationship between the residuals and model computed values of DO and BOD. The model computed values of DO and BOD by both the ANN models were in close agreement with their respective measured values in the river water. Relative importance and contribution of the input variables to the model output was evaluated through the partitioning approach. The identified ANN models can be used as tools for the computation of water quality parameters.     

A performance-based tabular approach for joint systematic improvement of risk control and resilience applied to telecommunication grid,gas network,and ultrasound localization system

Environment Systems and Decisions - Organizational and technical approaches have proven successful in increasing the performance and preventing risks at socio-technical systems at all scales....     

Trends over 1999–2014 in the concentrations of Ba,Cs, Co,Mo, Pb,Sb, Tl,and W in urine of US children aged 6–11 years

Data from National Health and Nutrition Examination Survey for children aged 6–11 years for 1999–2014 were used to study time trends and factors affecting the urinary levels of barium, cobalt, cesium, molybdenum, lead, antimony, thallium, and tungsten. Adjusted levels in urine declined every two years by 5.9% for barium, by 1.2% for cesium, by 18.2% for lead, and by 14% for antimony. For every additional smoker smoking inside a home, the levels of barium increased by 10.6% and for lead by 10%, but for tungsten levels decreased by 7.7%.     

Treatment of organic pollutants by homogeneous and heterogeneous Fenton reaction processes

Nowadays, the water ecosystem is being polluted due to the rapid industrialization and massive use of antibiotics, fertilizers, cosmetics, paints, and other chemicals. Chemical oxidation is one of the most applied processes to degrade contaminants in water. However, chemicals are often unable to completely mineralize the pollutants. Enhanced pollutant degradation can be achieved by Fenton reaction and related processes. As a consequence, Fenton reactions have received great attention in the treatment of domestic and industrial wastewater effluents. Currently, homogeneous and heterogeneous Fenton processes are being investigated intensively and optimized for applications, either alone or in a combination of other processes. This review presents fundamental chemistry involved in various kinds of homogeneous Fenton reactions, which include classical Fenton, electro-Fenton, photo-Fenton, electro-Fenton, sono-electro-Fenton, and solar photoelectron-Fenton. In the homogeneous Fenton reaction process, the molar ratio of iron(II) and hydrogen peroxide, and the pH usually determine the effectiveness of removing target pollutants and subsequently their mineralization, monitored by a decrease in levels of total organic carbon or chemical oxygen demand. We present catalysts used in heterogeneous Fenton or Fenton-like reactions, such as H₂O₂–Fe³⁺(solid)/nano-zero-valent iron/immobilized iron and electro-Fenton-pyrite. Surface properties of heterogeneous catalysts generally control the efficiency to degrade pollutants. Examples of Fenton reactions are demonstrated to degrade and mineralize a wide range of water pollutants in real industrial wastewaters, such as dyes and phenols. Removal of various antibiotics by homogeneous and heterogeneous Fenton reactions is exemplified.     

Thermal, Mechanical and Rheological Behavior of Poly(lactic acid)/Talc Composites

In the present study, influence of talc on thermal, mechanical and rheological behavior of PLA is investigated and the structure?Cproperty correlation for the PLA/talc composites is established. Poly(lactic acid)/talc composites are prepared by melt mixing of PLA with talc in twin screw extruder followed by blown film processing. Various characterizations techniques are used to evaluate thermal, morphological, mechanical and rheological behavior of PLA/talc composites and its blown film. DSC analysis showed that degree of crystallinity of PLA/talc composites was higher than that of neat PLA because of nucleating ability of talc. Spherulite morphology of PLA/talc composites showed that talc has increased nucleation density of spherulite having smaller radius than that of neat PLA. Talc is effective in enhancing tensile modulus and storage modulus of PLA due to reinforcing ability of talc particles.