THE GREAT DISMAL SWAMP: MANAGEMENT OF A HYDROLOGIC RESOURCE WITH THE AID OF REMOTE SÉNSING1

ABSTRACT: Both color infrared aerial photography and Landsat data are being used to provide information to meet present and future management goals for the Great Dismal Swamp National Wildlife Refuge. High and low altitude color infrared photographs are being used to study the hydrology and map the present vegetation of the swamp. A variety of significant ecologic units have been identified using these photographs. The completed maps will be used to evaluate analyses of landsat digital data. Once the present data base is compiled, it is hoped that routine analysis of Landsat data can be used for updating or to indicate areas where low altitude coverage or ground checking is desirable. The data base will also aid in identifying and evaluating trends that may provide guidelines for wetland management.     

A transition in the Dutch wastewater system? The struggle between discourses and with lock-ins

ABSTRACT

Recently, calls have increased for a paradigm shift or transition towards resource recovery and a circular economy in the Dutch wastewater system. However, we have observed diverging interpretations on the nature of the transition. This reflects the political environment of sustainability transitions: political struggle emerges over the definition of problems, futures and strategies to be used. In order to help clarify the emerging debate and identify political choices, we conducted a discourse analysis. We identified three discourses that reveal some of the political choices to be made. One discourse is becoming dominant and focusses on optimising the large-scale infrastructure, market development and legislative changes. The discourse draws on the existing infrastructure and current political-economic institutions, which gives it an advantage in becoming dominant. Our findings also suggest that this discourse shapes a transition pathway that is characterised by lock-in effects and, at most, incremental changes instead of a fundamental shift in the established Dutch wastewater system.     

Size of sexual swellings reflects ovarian function in chimpanzees (<Emphasis Type="Italic">Pan troglodytes</Emphasis>)

While many theories exist on the evolution of the sexual swelling signal in female primates, the significance of the very large and variable swellings found in some catarrhine primates is still debated. As suggested by Pagel [(1994) Anim Behav 47:1333–1341], these exaggerated and costly signals have the potential to provide information about differential female reproductive quality to males. While Domb [(2000) Department of Anthropology, Harvard University, Cambridge] and Domb and Pagel [(2001) Nature 410:204–206] propose that swellings serve to reliably indicate between-female fitness differences, we hypothesize that they may indicate current reproductive cycle quality, within or between females. This study examines the between-cycle relationship between ovarian function, gauged via fecal steroid analysis, and absolute size of sexual swellings, yielded through photogrammetric methods. Fourteen cycles from eight captive, group-living chimpanzees (Pan troglodytes) exhibited considerable variability both in ovarian steroid levels and maximum sexual swelling size. Nearly all measures of a female's maximal swelling in a cycle correlated with early follicular and early luteal estradiol averages and the duration of luteal progesterone elevation. Swelling area was also correlated with late follicular estradiol. Given past evidence that such measures of ovarian function predict conceptive success, these data strongly suggest that swellings could convey information to competing males about the fecundability of a potential mate.Communicated by C. Nunn     

Biological inventories and computer data bases: Their role in environmental assessments

An important goal of biological inventories is to provide information for environmental assessments of development projects and biodiversity conservation. Likewise, computer data bases have been proposed for efficient compilation and management of biological information. However, the attributes of biological inventories and computer data bases have not been examined with respect to environmental assessments. This article presents a case study in Mexico to analyze the current limitations of biological inventories for successful environmental assessments and biodiversity conservation in developing countries. Results demonstrate that, considering the objectives of environmental assessments and information constraints, computerized biological inventories should be assembled with a minimum of record fields: taxonomic data and georeferenced collection localities. Furthermore, it is proposed that environmental assessments should become a feedback to biological inventories and an important financial support to universities and research institutions in developing countries.     

WETLAND BOUNDARY DETERMINATION IN THE GREAT DISMAL SWAMP USING WEIGHTED AVERAGES1

ABSTRACT: A weighted average method was used to analyze transition zone vegetation in the Great Dismal Swamp to determine if a more uniform determination of wetland boundaries can be made nationwide. The method was applied to vegetation data collected on four transects and three vertical layers across the wetland-to-upland transition zone of the swamp. Ecological index values based on water tolerance were either taken from the literature or derived from local species tolerances. Wetland index values were calculated for 25-m increments using species cover and rankings based on the ecological indices. Wetland index values were used to designate increments as either wetland, transitional, or upland, and to examine the usefulness of a provisional wetland-upland break-point. Most increments were designated wetland or transitional when all species were used. Removal of three or five ubiquitous species either gave a wider range of wetland index values with a more variable designation of increments or caused designation of increments to be similar for all layers. The use of locally-derived rankings showed the sensitivity of the weighted averages method to ecological indices of species with large importance values. The weighted average method did not provide for an objective placement of an absolute wetland boundary, but did serve to focus attention on the transitional boundary zone where supplementary information is necessary to select a wetland-upland breakpoint.     

Influence of Fibers on the Mechanical Properties of Cassava Starch Foams

The utilization of renewable resources in packaging can provide solutions to ecological problems such as waste quantity. Agricultural resources are alternative raw materials, among which there is starch, a natural polysaccharide that can be used to form resistant foam under wet and warm conditions. The starch foam is obtained by thermo pressing process where cassava starch, water and additives are processed to form a rigid structure by swelling, gelatinization and network formation. Natural fibers can be used to improve the mechanical properties of starch foams. In this project was investigated the influence of the addition of fibers in the levels of 1, 2 and 3% of cassava (short fiber) and 1, 2 and 3% of wheat fiber (powered fiber) in the starch dough. The foams were characterized by physical methods of strength, flexibility, density and by Scanning Electron Microscopy (SEM). The increase in fibers quantity has resulted in foams with higher density and less flexibility, whatever the fiber type. Most fibers quantity did not improve the foam strength. Foam made with 1% of cassava fiber showed higher compression strength; by increasing the percentage quantity there was a decrease on the compression resistance. Foam made with wheat fiber presented a lower result in 2%. The fiber type had no statistical significance in strength, flexibility and density foam. Only the fiber quantity was significant. The results showed that both fibers presented limited dimensions to improve the reinforcement of the starch foams up to 1%.     

INFLUENCES OF SOIL DATASET RESOLUTION ON HYDROLOGIC MODELING1

ABSTRACT: Soils represent a fundamental abiotic parameter in defining the characteristics of an ecosystem. The U.S. Department of Agriculture (USDA) Natural Resources Conservation Service (NRCS) produces the most detailed digital spatial soil datasets that are publicly available. The Soil Survey Geographic (SSURGO) database contains basic attributes for the continuous coverage of soils across the United States. In its standard format, the SSURGO database is incompatible for use within the ArcView Soil and Water Assessment Tool (SWAT). A modified version of the State Soil and Geographic (STATSGO) database is the template soils dataset used by ArcView SWAT. This paper presents the methodology and development of a SSURGO database preprocessor extension for the ArcView SWAT model. A case study for the Upper Sabinal River Watershed near Uvalde, Texas, is given. Results indicate that hydro‐logic output parameter differences occur when comparing the STATSGO and SSURGO database information in the ArcView SWAT model under identical modeling conditions. Specifically, the SSURGO model produced a greater daily mean water yield with evapotranspiration and surface runoff being found consistently lower across the watershed. The most likely causes assigned to this phenomenon were higher percolation and resulting ground water return flow values due to significantly larger saturated hydraulic conductivity values associated with the SSURGO 2.x database.     

Origin of lead associated with different reactive phases in Scottish upland soils: an assessment made using sequential extraction and isotope analysis

Soil samples (0-25 cm) have been taken annually since 1991 from three protected plots set up at an upland location at Glensaugh in Aberdeenshire, Scotland. The soils were analysed using the original BCR sequential extraction procedure and the lead isotopic composition was determined in each of the fractions, as well as the unfractionated soil using thermal ionisation mass spectrometry (TIMS). The lead concentrations in all the soils, including those well away from the road, were much higher than typical background values indicating that the whole area has been subject to deposition of anthropogenic lead. The distribution of lead between the different fractions was similar for the two non-roadside soils with most lead present in the oxidizable fraction. Although most lead in the roadside soil was also present in the oxidizable fraction, a substantial proportion (about 10%) was in the easily soluble fraction suggesting that roadside lead could be more mobile than lead in the other soils. Good reproducibility was obtained for the isotope analyses in all the fractions. The ratios calculated for the bulk soil from the ratios in the individual fractions agreed very closely with those measured directly in the unfractionated soil thereby demonstrating both reproducibilty and accuracy. The lowest (206)Pb/(207)Pb ratios were found in the roadside soil consistent with the recent deposition of petrol lead. The (206)Pb/(207)Pb ratios in all fractions of the other soils fell into a narrow band and it was necessary to use (204)Pb ratios to differentiate between lead in the extractable fractions and lead in the residual component. It is probable that lead in the non-roadside soils was deposited a considerable time ago and is characterised by a relatively high (206)Pb/(207)Pb ratio. Use of the (204)Pb ratios showed that the residual components in each of the three soils were isotopically distinct.