Evaluation of Water Quality in the Chillán River (Central Chile) Using Physicochemical Parameters and a Modified Water Quality Index

The Chillán River in Central Chile plays a fundamental role in local society, as a source of irrigation and drinking water, and as a sink for urban wastewater. In order to characterize the spatial and temporal variability of surface water quality in the watershed, a Water Quality Index (WQI) was calculated from nine physicochemical parameters, periodically measured at 18 sampling sites (January–November 2000). The results indicated a good water quality in the upper and middle parts of the watershed. Downstream of the City of Chillán, water quality conditions were critical during the dry season, mainly due to the effects of the urban wastewater discharge. On the basis of the results from a Principal Component Analysis (PCA), modifications were introduced into the original WQI to reduce the costs associated with its implementation. WQI_DIR2 and WQI_DIR, which are both based on a laboratory analysis (Chemical Oxygen Demand) and three (pH, temperature and conductivity), respectively, four field measurements (pH, temperature, conductivity and Dissolved Oxygen), adequately reproduce the most important spatial and temporal variations observed with the original index. They are proposed as useful tools for monitoring global water quality trends in this and other, similar agricultural watersheds in the Chilean Central Valley. Possibilities and limitations for the application of the used methodology to watersheds in other parts of the world are discussed.     

Polychlorinated biphenyls in marine sediments from the southern North Sea and Scheldt estuary: a ten-year study of concentrations, patterns and trends

The paper reports the concentrations and patterns of CBs in sediments of the Belgian part of the southern North Sea and the Scheldt estuary for the period 1991-2001. The long-term analytical performance was well within the quality assurance boundaries set at the outset of the study and is consistent with the state of the art for this type of analysis. The CB concentrations (given as the median of the sum of IUPAC Nos 28, 52, 101, 118, 138, 153 and 180) vary between 0.1 microg kg(-1) and 50 microg kg(-1) dry weight in the total sediment and it could be demonstrated that CB patterns in the fine fraction of the sediment were closely similar throughout the investigated area. Isolation of the fine fraction (<63 microm) by sieving can be regarded as a physical normalisation to reduce the differences in sediment granulometric composition. It allows for a better understanding of CB distribution and patterns and improves the trend analysis. A significant downward trend could not be found at any of the stations, which suggests that CB levels have not been changing in the area of interest in the past decade.     

Environmental quality control and environmental games

Conclusion  In this paper we have considered a specific environmental game emphasizing both control-prevention efforts and the propensity to pollute by a firm which adopts a given pollution abatement technology. A random payoff game was constructed and solved under a risk neutral assumption and quadratic utilities for both the firm and the environmental controller. The game thus defined, provides a wide range of interpretations and potential approaches for selecting a control-inspection policies to prevent environmental risks. There are of course many facets to this problem, which could be considered and have not been considered in sufficient depth. For example, more complex control mechanisms and liabilities, the effects of insurance and risk sharing, the application of cooperative efforts and subvention of pollution abatement investments (through tax incentives and their like), etc. have not been considered [5,7]. These are topics for further research. The basic presumption of this paper is that it is very difficult to fully enforce pollution prevention by firms, as a result, some controls are needed to ensure that firms be controlled so that appropriate efforts are carried.     

Extra-pair paternity and the opportunity for sexual selection in a socially monogamous bird (Dendroica petechia)

We used multi-locus DNA fingerprinting to characterise the genetic mating system of the socially monogamous yellow warbler (Dendroica petechia). Over 2 years there were no instances of brood parasitism, but 59% of families (n = 90) contained extrapair sired young and 37% of offspring (n = 355) were of extra-pair paternity. Most hypotheses for extra-pair mating in monogamous species assume a paternity benefit to extra-pair sires, and focus on the benefit(s) to females. However, the assumption of male benefit has been little tested. Among yellow warblers, known extra-pair sires were just as likely to be cuckolded as any male in the population, and there was at least one reciprocal exchange of extra-pair paternity. Nevertheless, among known extra-pair sires, the paternity gains from extra-pair paternity were, on average, greater than the losses in their own families. These results show there is a paternity benefit to certain males. However, the benefit is not absolute but relative and therefore more difficult to measure. The results also suggest that patterns of extra-pair fertilisation are not determined by female choice alone. Most confirmed extra-pair mates were territorial neighbours, but some resided as far as three territories apart, and greater spatial separation was implied in other cases. Thus, the opportunity for extra-pair mating is great. We estimate that as a result of extra-pair fertilisations, variance in male mating success is increased somewhere between 3-fold and 15-fold over that which would result from within-pair reproduction alone. These findings affirm the potential importance of extra-pair reproduction for sexual selection in monogamous species and they support earlier suggestions that extra-territorial forays by male yellow warblers are for the purpose of extra-pair mating.     

Effect of multi-factors interaction on trace lead equilibrium during municipal solid waste incineration

The thermodynamic equilibrium of trace lead during the waste incineration was calculated on the basis of the minimization of the total Gibbs energy. The effect of incineration condition and MSW components on Pb distribution was investigated mainly in the view of the interaction of related elements. In the oxygen-rich condition, incineration temperature affects Pb distribution by the interaction of Cl, Ca and Na. In the fuel-rich condition, incineration temperature affects Pb distribution directly by the thermal transition of PbS(s) to PbCl(g) and the thermal transition of PbCl(g) to Pb(g). Air ratio has significant effect on Pb distribution by the interaction of H, O and Cl. The liberated Cl in oxidizing condition is far less than that in reducing condition. Na has the top priority to bond with Cl, than Ca only at low temperature and H only at high temperature, so the effect of Cl on Pb distribution depends on the content of Na and Ca. S promotes Pb volatilization by the interaction with Na in oxygen-rich and chlorine-poor condition and depresses Pb volatilization by the formation of PbS(s) directly without interaction with other elements in fuel-rich condition.     

Path analysis of factors influencing household solid waste generation: a case study of Xiamen Island,China

Comprehensive study of the factors influencing household solid waste (HSW) generation is crucial and fundamental for exploring the generation mechanism and forecasting future dynamics of HSW. A case study of Xiamen Island, China was employed to reveal the direct and indirect effects of demographic/socioeconomic factors on solid waste generation at the urban household scale. Based on a face-to-face questionnaire and two-stage survey of solid waste generation, a path analysis model was built. Results showed that the proposed path model exhibited good fit indices. Family size and dinning-at-home rate (DR), whose coefficients were ?0.40 and 0.43, respectively, were the two major factors influencing HSW directly. Moreover, family size, education level, employment rate and age structure played different degrees of indirect effects on HSW generation through respective paths, which should not be ignored. In terms of total effects, coefficients of family size, DR and employment rate were ?0.46, 0.43 and ?0.37, respectively, which were three most dominant factors influencing HSW generation. As for waste composition, organic waste was the most representative of HSW dynamics, and was the most sensitive to impact by the factors studied. Quantitative results of this study have important policy implications for sustainable municipal solid waste management.     

Recycling of cathode ray tube panel glasses as aggregates of concrete blocks and clay bricks

While the cathode ray tube (CRT) funnel containing lead could be transported to a smelting facility to recover lead, which could be an available option in domestic, a proper technology to recycle a CRT panel must be developed. Thus, it was suggested that CRT panel glass be used as aggregates of concrete blocks and clay bricks. Samples of blocks and bricks were fabricated with CRT powders and tested to measure their strength and absorption rate to determine their qualities, and environmental soundness was determined by measuring the leaching rate of hazardous metals. For concrete blocks, CRT panel glass powders incorporated as aggregates up to 40 % replacing stone powder was proposed as the proper condition for manufacturing blocks. Around 2 % of CRT panel incorporated into clay brick to substitute Kaoline was suggested to fabricate the best quality of clay brick. Results of leaching test met the criteria with much less concentration of hazardous metals, even lead compound containing in the CRT funnel. To conclude, the use of CRT panel powder after crushing it to the proper size as an aggregate of concrete blocks or clay bricks could be one of the appropriate alternatives to recycle for CRT glass waste being generated drastically in a short term.     

The application and evaluation research of coffee residue ash into mortar

Coffee residue is usually regarded as a kind of agriculture waste; as its quantity increases the treatment of coffee residue will become an environmental problem. This research is innovative in that it derives the possibility of recycle application using coffee residue ash for cement replacement. In this research, coffee residue is burned in an electronic oven to three kinds of coffee residue ash at 500, 600 and 700 °C, and then appropriate apparatus is used to check the chemical and physical properties of these three types of coffee residue ash. After a general comparison, this study selected 500 and 600 °C coffee residue ashes with 2, 3, 5, 10 and 15 % cement replacements to make 5 cm³ cube mortar specimen to test different curing ages’ compressive strength. Through measurement and experiment, this research found that the compressive strength decreased by adding 500 or 600 °C coffee residue ash into the mortar. By considering waste reduction and practice application, this research derives that using the 600 °C coffee residue ash with 10 % replacement is better than others application, such using result also can get valuable efficiencies of financial and CO₂ reduction.     

Rare earth element recovery potentials from end-of-life hybrid electric vehicle components in 2010–2030

Increasing attention is currently given to the management of end-of-life (EoL) hybrid electric vehicles (HEVs), because approximately two decades have passed since they were first introduced to the market. A HEV would be one of the largest consumers of rare earth elements (REEs), and hence represents the greatest potential for REE recovery in the future. The purpose of this study is to clarify the present and future recovery potential of REEs that are disposed of as EoL HEVs. This study first estimated the numbers of EoL HEVs during fiscal years (FYs) 2010–2030, and then clarified the potential for recovery of REEs from two HEV-specific components—the hybrid transmission and NiMH battery unit. The results suggest that 0.51–0.65 million HEVs will reach the EoL stage in FY2030, compared with only 11,000 HEVs in FY2010. As of FY2030, REE recovery potentials will increase to 220 tons and 2900 tons for EoL hybrid transmission and NiMH battery units, respectively. A total of 49,000 tons of REEs will be contained within HEV-specific components of HEVs still in use. Moreover, the potential for recovery of REEs from EoL hybrid transmissions and NiMH battery units is estimated to equal 35.4 and 92.1 % of respective demand.