Photochemical nitro-nitrite rearrangement in methyl parathion decay under tropical conditions

This work presents a study of the abiotic degradation of commercially available methyl parathion in aqueous solution at two different concentrations (88 mg/L and 200 μg/L). The effects of solar irradiation and the presence of humic acids were evaluated and revealed a synergistic response between them. The half-life of methyl parathion ranged from 4.9 to 37 days, and the experimental data also show that photochemical processes were the most relevant in this case. The only byproduct found in samples submitted to shadowed conditions was 4-nitrophenol. On the other hand, 4-nitrophenol, methyl paraoxon and a new degradation product (O,O-dimethyl O-p-hydroxyphenyl phosphorothioate) were detected when the samples were exposed directly to sunlight. This newly identified compound was prepared in the laboratory by thiophosphorylation of hydroquinone, and coelution experiments with authentic samples provided unambiguous confirmation of the presence of O,O-dimethyl O-p-hydroxy phenylphosphorothioate in samples.     

The application of Geographical Information Systems to determine environmental impact significance

This paper presents a new methodology for impact assessment—SIAM (Spatial Impact Assessment Methodology)—which is based on the assumption that the importance of environmental impacts is dependent, among other things, on the spatial distribution of the effects and of the affected environment. The information generated by the use of Geographical Information Systems (GIS) in impact identification and prediction stages of Environmental Impact Assessment (EIA) is used in the assessment of impact significance by the computation of a set of impact indices. For each environmental component (e.g., air pollution, water resources, biological resources), impact indices are calculated based on the spatial distribution of impacts. A case study of impact evaluation of a proposed highway in Central Portugal illustrates the application of the methodology and shows its capabilities to be adapted to the particular characteristics of a given EIA problem.     

Physicochemical Properties of Composite Materials Based on Thermoplastic Yam Starch and Polylactic Acid Improved with the Addition of Epoxidized Sesame Oil

Journal of Polymers and the Environment - Biodegradable materials provide a primary function in preserving and protecting food products, helping to extend shelf life. The present work aims to...     

Speciation of lipids and humus-like colloidal compounds in a forest soil reclaimed with municipal solid waste compost.

The progressive transformations of lipid and humus-like fractions in soil after massive input (400 Mg ha(-1)) of urban waste have been studied during an 87-week experiment in field plots of a degraded Calcic Regosol in Central Spain. Structural changes in the macromolecular fractions were small when compared with the qualitative and quantitative changes in lipid composition. The intense depletion of the lipid fraction with time and the decrease of the humic acid to fulvic acid ratio were the most significant quantitative indices of the compost transformation in soil. Changes in soil lipid fractions were especially noted in relation to their speciation status and distribution patterns (carbon preference index and relative chain length). Three subfractions were considered: (I) direct extraction with petroleum ether, (II) liquid-liquid extraction after soil treatment with 2 M H3PO4 and (III) after soil treatment with 0.1 M NaOH. Although lipid concentration tends to decrease with time, lipids in the fraction tightly bonded to soil (III) remained qualitatively and quantitatively constant in the course of the field experiment. Gas chromatographic-mass spectrometric analyses showed that the more stable the association of lipid to the soil matrix, the fewer the changes observed in the distribution pattern of the fatty acids during the progressive transformation stages.     

Mitochondrial control region sequence analyses indicate dispersal from the US East Coast as the source of the invasive Indo-Pacific lionfish Pterois volitans in the Bahamas

Lionfish are popular aquarium fish from the Indo-Pacific that have invaded the western Atlantic. Two species, Pterois volitans and P. miles, were well established along the United States east coast before the first lionfish were reported from the Bahamas in 2004, where they quickly dispersed throughout the archipelago by 2007. The source of the Bahamian lionfish invasion has been in question because of the hypothesized low connectivity between Florida and Bahamas reef species as well as the temporal lag in their arrival in the Bahamas. Mitochondrial control region haplotypes (680 bp) were determined and analyzed for lionfish specimens from the Bahamas, North Carolina, and two sites within their native range (Indonesia and the Philippines). Exact tests, pairwise F _st and AMOVA analyses all showed no significant differentiation between the Bahamas and North Carolina specimens. The similarity between the Bahamas and North Carolina lionfish was also reflected in a minimum spanning network and neighbor-joining distance tree generated from the data. Sequence analyses also revealed the presence of only Pterois volitans, as no P. miles were detected in the Bahamian sample. These results indicate that the source of the Bahamian lionfish is egg and larval dispersal from the United States east coast population, and support previous models of reef fish dispersal that suggest a low level of connectivity between the Bahamas and east coast of Florida.     

Antecedents of fatigue, close calls, and crashes among commercial motor-vehicle drivers

PROBLEM: Minimizing driver fatigue among commercial motor-vehicle (CMV) drivers is a major safety issue in the United States. This study examines the effects of potentially fatigue-inducing factors inherent in truck driving work and company safety management in explaining: (a) drivers driving while fatigued, (b) the frequency of close calls due to fatigue, and (c) actual crashes among CMV drivers. METHOD: Data for this study are derived from a survey of CMV drivers in 116 trucking firms, with all data being driver-reported. The relative roles of fatigue-inducing factors and safety management practices in explaining variation in fatigue, close calls, and crashes are reported, along with the roles of fatigue in affecting close calls and crashes via hierarchical regression. RESULTS: Findings indicated that fatigue-inducing factors inherent in driving work and safety practices accounted for appreciable variation in driving fatigued (R(2) =.42) and close calls (R(2) =.35), but not crash involvement. Driving while fatigued also accounted for incremental increases in the amount of variation in close calls, after consideration of inherent factors and safety practices. IMPACT ON INDUSTRY: Findings indicate that safety practices (e.g., establishment of a strong safety culture, dispatcher scheduling practices, company assistance with fatiguing behaviors such as loading and unloading) have considerable potential to offset fatigue-inducing factors associated with truck driving work.     

Mechanical,Barrier and Antioxidant Properties of Chitosan Films Incorporating Cinnamaldehyde

Chitosan films (CF) [1 and 2% w/v] alone and with cinnamaldehyde (CNE) [0.25, 0.5 and 1% v/v] were prepared using an emulsion method, and the obtained films were characterized in terms of water vapor permeability (WVP), water solubility and optical, mechanical and antioxidant properties. The incorporation of CNE at 1% (v/v) significantly decreased the water solubility of the film by approximately 4% for the 1 and 2% CF films, whereas the WVP increased (2.5–3.5 times). The incorporation of CNE (0.25 and 0.5%) into 2% CF significantly increased the tensile strength (TS) (62 and 34%, respectively) and the percent elongation (%E) values, 26, 30 and 52% for CF that contained 0.25, 0.5 and 1% CNE, respectively. The largest value of the elasticity modulus (EM) was observed for 2% CF with 0.25% CNE. All films exhibited a yellow appearance (b*), but the CNE content had a marked impact on the coloration of the films. The CNE recoveries of the CF films (1 and 2%) with 1% of CNE were high (43 and 67%). The antioxidant activities indicated that the incorporation of 1% CNE into CF films (1 and 2%) increased the antioxidant activity. The protective effects of the films with and without CNE on erythrocytes were very strong (36–72% hemolysis inhibition). These results suggest there are potential applications for CF-CNE films as active packaging for the preservation of food products.     

Microbial Enzymes Involved in Polyurethane Biodegradation: A Review

Plastics are present in a lot of aspects of everyday life. They are very versatile and resistant to microbial attack. Polyurethanes are used in several industries and are divided in polyester and polyether polyurethanes and there are different types among them. Despite their microbial resistance, they are susceptible to the attack of fungi and bacteria but the mechanism to elucidate its biodegradation are unknown. There are reports from bacteria and fungi that are capable of degrading polyurethane but the studies about the enzymes that attack the plastic are focused on bacterial enzymes only. The enzymes reported are of type esterase and protease mainly since these enzymes are very unspecific and can recognize some regions in the polyurethane molecule and hydrolyze it. Fungal enzymes have been studied prior the 1990s decade but recently, some authors report the use of filamentous fungi to degrade polyurethane and also report some characteristics of the enzymes involved in it. This review approaches polyurethane biodegradation by focusing on the enzymes reported to date.     

An integrated approach towards transforming an industrial park into an eco-industrial park: the case of Salaise-Sablons

This paper describes an integrated approach to transform an industrial park into an eco-industrial park by combining three interconnected goals, namely, the consolidation of industrial symbiosis, the promotion of sustainable accessibility and the development of multi-functionalities. The result is an interdependent approach where industrial and territorial ecosystems are jointly planned, seeking a more sustainable level of development that considers industrial activity, the transportation of people and goods and the spatial articulation with the neighbouring environment and urban areas. The critical points and challenges for improving the territorial integration of the French industrial park of Salaise-Sablons are discussed, providing lessons for the future. Regardless of the specificities of the case study, this approach has the potential to be adopted in similar industrial parks.     

Networks and spatial segregation in the production of urban poverty in São Paulo

This article discusses the importance of social networks as survival strategies, testing the impact of segregation on the structure and organisation of personal networks of low-income individuals. It presents preliminary results of an ongoing study on personal networks of individuals living in situations of poverty in São Paulo. We analyse the characteristics of 89 personal networks of poor individuals living in three urban locations, characterised by different social contents and different contexts of segregation. The results indicate a considerable heterogeneity of networks (in terms of size, diversity of sociability spheres, among other dimensions) and a strong localism, which is commonly found in the three different urban contexts. At the same time, the analysis suggests a low impact of segregation and a more complex relationship between networks and space than previously described by the international literature.