Using the Framework for Integrated Sustainability Assessment (FISA) to expand the Multiregional Input–Output analysis to account for the three pillars of sustainability

Decision makers interested in promoting sustainable development must simultaneously consider the environmental, economic and social implications of any action. This article proposes the Framework for Integrated Sustainability Assessment (FISA), a methodological framework for conducting a sustainability impact assessment of any investment project. Based on a Multiregional Input–Output (MRIO) framework, FISA links the extended MRIO results with social risk data from the Social Hotspots Database (SHDB) in order to integrate the social with the environmental and economic pillars. Resulting impacts are simultaneously considered and reported by means of FISA charts, making it possible to assess the different impacts within the three sustainability pillars across countries involved in the whole supply chain of investment projects. This methodological framework can be applied not only to compare the sustainability impacts of two alternative projects, but also to derive specific recommendations aimed at minimizing the harmful social, environmental and economic effects along the whole project supply chain.     

<Emphasis Type="Italic">Mesorhizobium</Emphasis> bacterial strains isolated from the legume <Emphasis Type="Italic">Lotus corniculatus</Emphasis> are an alternative source for the production of polyhydroxyalkanoates (PHAs) to obtain bioplastics

Polyhydroxyalkanoic acids (PHAs) are natural polyesters that can be used to produce bioplastics which are biodegradable. Numerous microorganisms accumulate PHAs as energy reserves. Combinations of different PHAs monomers lead to the production of bioplastics with very different properties. In the present work, we show the capability of strains belonging to various phylogenetic lineages within the genus Mesorhizobium, isolated from Lotus corniculatus nodules, to produce different PHA monomers. Among our strains, we found the production of 3-hydroxybutyrate, 3-hydroxyvalerate, 3-hydroxydodecanoate, and 3-hydroxyhexadecanoate. Most of the PHA-positive strains were phylogenetically related to the species M. jarvisii. However, our findings suggest that the ability to produce different monomers forming PHAs is strain-dependent.     

Climate change stimulates the growth of the intertidal macroalgae <Emphasis Type="Italic">Ascophyllum nodosum</Emphasis> near the northern distribution limit

Ascophyllum nodosum is a foundation macroalgae of the intertidal zone that distributes across latitude 41.3–69.7°N. We tested the hypothesis that growth of A. nodosum near the northern distribution edge increases with warming. We retrospectively quantified the growth of eight A. nodosum populations at West Greenland and North Norway (from 64°N to 69°N). For seven populations, we measured growth rates since 1997–2002 and for one of them we extended the time series back to 1956 using published estimates. Individuals at northern populations elongated between 2.0 and 9.1 cm year^?1 and this variability correlated with temperature and annual ice-free days. A spatial comparison of A. nodosum growth across the species distribution range showed that Northern (and coldest) populations grew at the slowest rates. Our results demonstrate that arctic climate change enhances the growth of A. nodosum populations and suggest that their productivity may increase in response to projected global warming.     

Uncertainty of exposure assessment of consumers to pesticide residues derived from food consumed

The sources of quantitative and qualitative uncertainties of the exposure of a consumer to a pesticide residue are identified. The contribution of quantifiable uncertainties of input parameters of deterministic model to the combined uncertainty of the estimated exposure is shown with detailed calculation using the pesticide residue content of food consumed during two days. The daily intakes of bifenthrin residues calculated for the 60 kg bodyweight of the reporting person are 0.00257 mg/kgbw and 0.00281 mg/kgbw for day 1 and day 2, respectively with 27-28% combined uncertainty. The major contributors were fruits and whole meal bread. The contribution of the individual steps to the combined uncertainty depends on the particular food item. In general, the variability of recipes, estimation of the mass of consumed food, sampling, processing of raw commodities and analysis of pesticide residues influenced most, in decreasing order, the combined uncertainty of the estimated daily exposure.     

Health risk assessment through consumption of vegetables rich in heavy metals: the case study of the surrounding villages from Panasqueira mine,Central Portugal

Panasqueira mine is a tin–tungsten mineralization hosted by metasediments with quartz veins rich in ferberite. The mineralization also comprises wolframite, cassiterite, chalcopyrite, several sulfides, carbonates and silver sulfosalts. The mining and beneficiation processes produce arsenic-rich mine wastes laid up in huge tailings (Barroca Grande and Rio tailings). The contents of As, Cd, Cr, Cu, Pb and Zn were estimated in rhizosphere soils, irrigation waters, road dusts and in potatoes, cabbages, lettuces and beans, collected on local gardens of four neighborhood Panasqueira mine villages: S. Francisco de Assis (SFA) and Barroca suffering the influence of tailings; Unhais-o-Velho and Casegas considered as non-polluted areas. The mean concentrations of metals in rhizosphere soils and vegetables exceed the reference guidelines values and seem to be linked to the sulfides. The rhizosphere ecological risks were ranked in the order of Cd > As > Cu > Pb > Zn > Cr and SFA > Barroca > Casegas > Unhais-o-Velho. Metal concentrations, in vegetables, were found in the order of lettuce > cabbage > potatoes and SFA > Barroca > Casegas > Unhais-o-Velho. For cabbages and lettuces, the tendency of contamination is roots > leaves and for potatoes is roots > leaves > tubers. The risk for residents, due to ingesting of metals/metalloid, by consuming vegetables grown around the sampling area, was calculated and the result indicates that the inhabitants of these villages are probably exposed to some potential health risks through the intake of heavy metals and metalloids via consuming their vegetables.     

The Effect of Extraction Conditions on the Chemical Characteristics of Pectin from Opuntia ficus indica Cladode Flour

Pectin from the cladode flour of Opuntia ficus indica was extracted at different ethylenediaminetetraacetate concentrations (10 or 20 %), temperatures (40 or 80 °C), pH values (2 or 11), and times (10, 20, 30 40, 50 or 60 min). The effects of the extraction conditions on the yield, purity, and chemical composition of pectin were assessed. The highest pectin yield was observed for pectin obtained under alkaline conditions and 20 % of EDTA. However, pectin produced from alkaline extractions had a lower content of GalA than pectin produced from acid extractions. Higher temperatures favored the extraction of pectin under acid conditions, but these conditions diminished the arabinose content of pectins in a time-dependent manner. The tested extraction conditions caused only slight changes in the molecular weight of the extracted pectin as a function of time.     

Assessment of spent mushroom substrate as sorbent of fungicides: influence of sorbent and sorbate properties

The capacity of spent mushroom substrate (SMS) as a sorbent of fungicides was evaluated for its possible use in regulating pesticide mobility in the environment. The sorption studies involved four different SMS types in terms of nature and treatment and eight fungicides selected as representative compounds from different chemical groups. Nonlinear sorption isotherms were observed for all SMS-fungicide combinations. The highest sorption was obtained by composted SMS from Agaricus bisporus cultivation. A significant negative and positive correlation was obtained between the K(OC) sorption constants and the polarity index values of sorbents and the K(OW) of fungicides, respectively. The statistic revealed that more than 77% of the variability in the K(OW) could be explained considering these properties jointly. The other properties of both the sorbent (total carbon, dissolved organic carbon, or pH) and the sorbate (water solubility) were nonsignificant. The hysteresis values for cyprodinil (log K(OW)= 4) were for all the sorbents much higher (>3) than for other fungicides. This was consistent with the remaining sorption after desorption considered as an indicator of the sorption efficiency of SMS for fungicides. Changes in the absorption bands of fungicides sorbed by SMS observed by FTIR permitted establishing the interaction mechanism of fungicides with SMS. The findings of this work provide evidence for the potential capacity of SMS as a sorbent of fungicides and the low desorption observed especially for some fungicides, although they suggest that more stabilized or humified organic substrates should be produced to enhance their efficiency in environmental applications.     

Comparison of batch, stirred flow chamber, and column experiments to study adsorption, desorption and transport of carbofuran within two acidic soils

Different methods (batch, column and stirred flow chamber experiments) used for adsorption and desorption of carbofuran studies were compared. All tested methods showed that the carbofuran adsorption was higher in the soil with the higher organic matter content, whereas the opposite behaviour was observed for the percentage of carbofuran desorbed. However, different methods have revealed some discrepancies in carbofuran adsorption/desorption kinetics. Although batch method showed interesting data on equilibrium experiments, such as a low heterogeneity for the carbofuran adsorption sites independent of soil organic matter content, it had some disadvantages for carbofuran adsorption/desorption kinetic studies. The disadvantages were related with the excessive limitations of this method on kinetics, i.e., no difference could be detected between different soils. However, with column and stirred flow chamber methods the carbofuran adsorption/desorption kinetics of different soils could be compared. Moreover, the absolute values of carbofuran adsorption/desorption and its rate were higher in the stirred flow chamber than in the batch and column experiments. Using stirred flow chamber experiments the carbofuran desorption was significantly faster than its adsorption, whereas carbofuran using column experiments they were similar. These discrepancies should be considered when the results obtained only with one method is discussed.     

Polychlorinated biphenyls (PCBs) residues in milk from an agroindustrial zone of Tuxpan, Veracruz, Mexico

The coasts of the Gulf of Mexico are zones exposed to the exploration and exploitation of petroleum sources, and the products generated in agricultural zones may become contaminated by persistent organic pollutants (POPs). The objective of the present study was to evaluate the presence of polychlorinated biphenyl compounds (PCBs) in milk from dairy production units near sources of environmental pollutants. It was confirmed that the seven congeners of nondioxin-like PCBs (NDL-PCBs) are present in milk where compounds PCB101, PCB118, PCB153 and PCB180 appear in 100% of the samples analyzed, the rank of concentration for the sum of the seven congeners fluctuating between 2.6 and 26 ng g⁻¹ with a median of 6 ng g⁻¹. None of the samples surpassed the provisional value established by the EU of 40 ng g⁻¹ of milk fat for the sum of the seven congeners, indicator that was not affected by the season of the year (p < 0.05), whose median of 8.6 ng g⁻¹ and 6.3 ng g⁻¹ for rain and drought respectively. The concentrations of NDL-PCBs found in milk do not represent a problem for human health; however, they alert the existence of spontaneously generated, uncontrolled sources that may represent a potential danger for human and animal health.