Experimental research of oily sawdust air gasification

This article shows oily sawdust gasification research on countercurrent installation. Experimental research was on a laboratory scale. The main purpose of the experiment was combustible gas production with higher CH₄ concentration. Gas concentrations like CO, CO₂, CH₄, H₂, and C_nH_m determine syngas composition. The technological parameter’s value defines experimental conditions. Value of this was fuel to air ratio. With fuel to air ratio change, syngas composition was a differential phenomenon where it depended on the process parameters like temperature. Additionally, evaluation of methane formation from CO, H₂, and CO₂ was done. Methanization coefficients were based on CO and CO₂ hydrogenation reactions. Component’s activity was in analogs way to syngas components changed.

     

Innovations strategy for moving from created regional clusters to co-creation in life sciences for health care and well-being ecosystems

Environmental Science and Pollution Research - Over the last decades, the demographic changes have all altered the population structure and influenced the social, economic, and political...     

Determination of phthalates in particulate matter and gaseous phase emitted in indoor air of offices

Environmental Science and Pollution Research - Phthalate esters (PAEs) are endocrine disrupters and can disrupt the functioning of different hormones, causing adverse effects on human health. Due...     

Solar drying of granulated waste blends for dry biofuel production

Environmental Science and Pollution Research - In the paper, results of drying biofuels from sewage sludge using solar energy are presented. Drying rates of biofuels made from sewage sludge and...     

Soil and preen waxes influence the expression of carotenoid-based plumage coloration

The signaling function of carotenoid-based plumage is mainly determined by the concentration of pigments in feathers. For this reason, most studies of the proximate control of coloration focus on processes during and preceding moult. In great tits Parus major, past research demonstrates that carotenoid-based plumage coloration honestly indicates male quality and, thus, may be a sexually selected signal. In this study, we investigate how dirt and preen oil influence the coloration of carotenoid-based feathers in the great tit. We collected six feathers from each individual bird; three feathers served as controls while the remaining three feathers were washed with a chloroform/methanol mixture to remove soil and preen waxes. We assessed plumage coloration using digital photography. This cleaning procedure slightly enhanced ornamentation; the experimentally cleaned feathers expressed hues shifted towards shorter wavelengths and expressed brighter overall coloration than control feathers. This is the first experimental study conducted on wild birds demonstrating that, in addition to pigment concentration, the presence of preen waxes and soils on feathers may contribute to variation in coloration.     

Use of beryllium-7 to document soil redistribution following forest harvest operations

Rapid and reliable methods for documenting soil erosion associated with forest harvest operations are needed to support the development of best management practices for soil and water conservation. To address this need, the potential for using 7Be measurements to estimate patterns and amounts of soil redistribution associated with individual post-harvest events was explored. The 7Be technique, which was originally developed for use on agricultural land, was employed to estimate soil redistribution associated with a period of heavy rainfall within a harvested forest area located in the Lake Region of Chile (39 degrees 44'7' S, 73 degrees 10'39' W; 22% slope; and mean annual rainfall 2300 mm yr(-1)). The results provided by the 7Be technique were validated against direct measurements of soil gain or loss during the same period obtained using erosion pins. The information produced by the two approaches was similar. The results of this study demonstrate the potential for using 7Be measurements to document event-based erosion in recently harvested forest areas.     

Metal contamination of farming soils affected by industry

The contents of nine elements (As, Cd, Cr, Cu, Hg, Ni, Pb, Sb and Zn) have been assayed in the farming soils of Suszec commune (southern Poland). This area is affected by the main industrial centre of Poland (the Upper Silesian Industrial Region), the Czech Republic (Trzyniec smelter) and local contamination sources (coal mine). The contamination of the soils was assessed on the basis of geoaccumulation index, enrichment factor, contamination factor and degree of contamination. The tests revealed elevated contents of cadmium, lead, arsenic, antimony and mercury. The contents of the other elements were similar to the levels in the Earth's crust or pointed to metal depletion in the soil (EF<1).     

Depth-dependence and monthly variability of charophyte biomass production: consequences for the precipitation of calcium carbonate in a shallow <Emphasis Type="Italic">Chara</Emphasis>-lake

The month-to-month variability of biomass and CaCO₃ precipitation by dense charophyte beds was studied in a shallow Chara-lake at two depths, 1 and 3 m. Charophyte dry weights (d.w.), the percentage contribution of calcium carbonate to the dry weight and the precipitation of CaCO₃ per 1 m² were analysed from May to October 2011. Physical-chemical parameters of water were also measured for the same sample locations. The mean dry weight and calcium carbonate precipitation were significantly higher at 1 m than at 3 m. The highest measured charophyte dry weight (exceeding 2000 g m^?2) was noted at 1 m depth in September, and the highest CaCO₃ content in the d.w. (exceeding 80 % of d.w.) was observed at 3 m depth in August. The highest CaCO₃ precipitation per 1 m² exceeded 1695 g at 1 m depth in August. Significant differences in photosynthetically active radiation (PAR) were found between 1 and 3 m depths; there were no significant differences between depths for other water properties. At both sampling depths, there were distinct correlations between the d.w., CaCO₃ content and precipitation and water properties. In addition to PAR, the water temperature and magnesium and calcium ion concentrations were among the most significant determinants of CaCO₃ content and d.w. The results show that light availability seems to be the major factor in determining charophyte biomass in a typical, undisturbed Chara-lake. The study results are discussed in light of the role of charophyte vegetation in whole ecosystem functioning, with a particular focus on sedimentary processes and the biogeochemical cycle within the littoral zone.     

Alginate beads containing water treatment residuals for arsenic removal from water—formation and adsorption studies

Water treatment residuals (WTRs) produced in large quantities during deironing and demanganization of infiltration water, due to high content of iron and manganese oxides, exhibit excellent sorptive properties toward arsenate and arsenite. Nonetheless, since they consist of microparticles, their practical use as an adsorbent is limited by difficulties with separation from treated solutions. The aim of this study was entrapment of chemically pretreated WTR into calcium alginate polymer and examination of sorptive properties of the obtained composite sorbent toward As(III) and As(V). Different products were formed varying in WTR content as well as in density of alginate matrix. In order to determine the key parameters of the adsorption process, both equilibrium and kinetic studies were conducted. The best properties were exhibited by a sorbent containing 5 % residuals, formed in alginate solution with a concentration of 1 %. In slightly acidic conditions (pH 4.5), its maximum sorption capacity was 3.4 and 2.9 mg g^?1 for As(III) and As(V), respectively. At neutral pH, the adsorption effectiveness decreased to 3.3 mg As g^?1 for arsenites and to 0.7 mg As g^?1 for arsenates. The presence of carboxylic groups in polymer chains impeded in neutral conditions the diffusion of anions into sorbent beads; therefore, the main rate-limiting step of the adsorption, mainly in the case of arsenates, was intraparticle diffusion. The optimal condition for simultaneous removal of arsenates and arsenites from water by means of the obtained composite sorbent is slightly acidic pH, ensuring similar adsorption effectiveness for both arsenic species.     

Conditions for the development of anaerobic digestion technologies using the organic fraction of municipal solid waste: perspectives for Poland

This article outlines problems related to the location of facilities designed to treat the organic fraction of municipal solid waste (OFMSW). Anaerobic digestion (AD) facilities are investigated as a treatment option, while taking into account the aspects of renewable energy generation. This research has been spurred on by the relationship between waste management, energy generation issues and spatial planning procedures. The analysis is focused on urban and semi-urban areas of medium and large cities. One of the most difficult issues associated with siting of waste processing plants is its integration with local infrastructures, avoiding conflicts and negative environmental impacts at the same time. This research aims to analyse possible locations for AD plants fuelled by OFMSW in Poland. Based on the experience gained from other countries and lessons learnt from the analysis of existing facilities in Europe, conditions for the location of this type of waste treatment plants have been defined, with the focus on economic, environmental and social issues. Most likely, the results of the multicriteria decision analysis for siting of municipal solid waste AD plants (M-BIST tool) could be transferred to other countries, especially those with a comparable GDP level and a similar framework for a waste management system.