Catalytic destruction of 1,2-dichlorobenzene on V2O5-WO3/Al2O3-TiO2 catalyst

Studies on the catalytic destruction of 1,2-dichlorobenzene were carried out on a specially constructed semi-technical equipment whose most important element was a catalytic reactor with a monolithic catalyst in the form of 150 x 150 x 100 mm cubes. A catalyst made from cordierite with an active layer composed of Al2O3 - 64 wt%, TiO2 - 26 wt%, V2O5 - 6.6 wt% and WO3 - 3.4 wt% was used. The reactor made it possible to carry out the process in the temperature range 150-350 degrees C, at variable catalyst loading and different velocities of gas flow through the reactor. The content of 1,2-dichlorobenzene in the air was analysed by a chromatographic method. A significant effect of catalyst loading and temperature on 1,2-dichlorobenzene destruction efficiency was observed and no effect of the linear flow velocity through the catalyst on o-dichlorobenzene destruction efficiency was reported. The applied vanadium-tungsten catalyst on a monolithic carrier made from TiO2/gamma-Al2O3 revealed very good activity that resulted in an over 80% efficiency of 1,2-dichlorobenzene destruction at the temperature around 250 degrees C at a very high catalyst loading reaching ca. 8200 h(-1). Additionally, in this study the kinetics of 1,2-dichlorobenzene decomposition was determined, specifying the order of reaction and dependence of the decomposition rate constant on temperature, using a simple power-rate law model.     

Distribution patterns of PAHs and trace elements in mosses Hylocomium splendens (Hedw.) B.S.G. and Pleurozium schreberi (Brid.) Mitt. from different forest communities: a case study, south-central Poland

Twenty samples of the moss species Hylocomium splendens and Pleurozium schreberi were collected at 10 sites of the Holy Cross Mountains (south-central Poland) and analyzed for 16 polycyclic aromatic hydrocarbons and 33 elements. The ring sequence of PAHs in the moss samples is: 4 (92-1040 ng x g(-1))>3 and 5 (21-272 ng x g(-1))>6 (<5-131 ng x g(-1)). H. splendens accumulates PAHs more effectively than P. schreberi, and therefore the former may be regarded as a better bioindicator of PAHs. No correlation was found between concentrations of PAHs and elements. However, both H. splendens and P. schreberi shows different bioaccumulative capabilities depending on the plant communities. The mosses growing in the dry pine forest Cladonio-Pinetum reveal higher levels of Fe, Na, Sr, Ti, Cr, Mo, Ni, V and higher mean concentrations of summation operator16 PAHs, whereas those from the continental coniferous forest Querco roboris-Pinetum are highlighted by elevated levels of B, Ca, K, Mg, Mn, P, Rb and Sb and lower mean concentrations of summation operator16 PAHs. These differences seem to be brought about by a higher biodiversity of the second forest type and its higher productivity that favors more effective cycling of elements.     

Fungicidal value of wood tar from pyrolysis of treated wood

The objective of the paper was to estimate the fungicidal value of wood tar extracted as a product of pyrolysis of wood previously treated with either creosote oil or CCB-type salt preservative. The effectiveness of wood treated with one of these two wood tar residuals was compared to the effectiveness of wood treated with virgin creosote oil (type WEI-B) and an untreated control. Wood was impregnated with alcohol solutions of the two extracted preservatives or virgin creosote oil and then subjected to the Coniophora puteana, Poria placenta and Coriolus versicolor fungi. The fungicidal values of the investigated preservatives were determined with the use of the short agar-block method and the aging test according to the standard EN 84. It was found that wood tar extracted by pyrolysis of old creosote-treated wood and then used to treat wood may have potential as a preservative for wood protection or as a component of preservatives.     

Trace metals in the shells of blue mussels (Mytilus edulis) from the Poland coast of Baltic sea

The Odiel salt marshes (Marismas del Odiel) are an important nature area declared a Biosphere Reserve, but they are greatly affected by pollution from the Odiel River. Surface sediments from this area were analysed using the latest version of the BCR sequential extraction procedure to determine the fractionation of As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn among four geochemical phases (acid-soluble, reducible, oxidisable and residual). The total content of each of the metals and As was also determined. The results showed high concentrations of As, Cd, Cu, Pb and Zn, with maximums of 791 mg kg⁻¹ of As, 8.5 mg kg⁻¹ of Cd, 2,740 mg kg⁻¹ of Cu, 1,580 mg kg⁻¹ of Pb and 3,920 mg kg⁻¹ of Zn. The concentrations of Cr, Mn and Ni were low since there are no sources of pollution by them in the area. A comparison of the metal and As levels with the sediment quality guidelines showed that the pollution is sufficient to produce noxious effects in aquatic organisms in most of the Odiel salt marshes. Based on the chemical distribution of the elements, it was found that Cd and Zn were the most mobile (i.e., elements that can pass easily into the water under changing environmental conditions). However, Cr, Fe, Ni and As were present in the greatest percentages in the residual fraction, which implies that these elements are strongly linked to the sediments.     

Ecotoxicological sediment evaluations in marine aquaculture areas of Chile

Given its geographic characteristics, the southern Chilean fjord area is subjected to growing environmental pressure from the development of diverse forms of aquaculture (i.e., fish, algae, shellfish). The sediments accumulate substances as a natural sink, and ecotoxicology assays offer a reliable and robust proxy for sediment quality analyses. This study's objective was to establish a mid-range toxicity base line for the sediments in the region by applying a battery of non-specific ecotoxicological assays. Sediment samples (28) were collected in the channels and fjords studied during the CIMAR-Fiordos 11 cruise (July 2005). The sediments were evaluated using different species endemic to the eastern Pacific as targets: Ampelisca araucana, Tisbe longicornis, Arbacia spatuligera, and Dunaliella tertiolecta. The conditions for each assay were reported previously. Of the four species used as ecotoxicological tools, only D. tertiolecta differed significantly from the control group (negative) in terms of its growth. This difference could be attributed to nutrient enrichment. In general, we concluded that, although local changes occurred in the sediments, the mesoscale magnitude of the ecotoxicological alterations was small. Nonetheless, a surveillance program should be implemented that would allow us to follow-up and analyze the changes that are taking place in the systems on broader scales of time and space.     

Application of multivariate statistical techniques to evaluation of water quality in the Mała Wełna River (Western Poland)

The paper presents the results of determinations of physico-chemical parameters of the Ma?a We?na waters, a river situated in Wielkopolska voivodeship (Western Poland). Samples for the physico-chemical analysis were taken in eight gauging cross-sections once a month between May and November 2006. To assess the physico-chemical composition of surface water, use was made of multivariate statistical methods of data analysis, viz. cluster analysis (CA), factor analysis (FA), principal components analysis (PCA), and discriminant analysis (DA). They made it possible to observe similarities and differences in the physico-chemical composition of water in the gauging cross-sections, to identify water quality indicators suitable for characterising its temporal and spatial variability, to uncover hidden factors accounting for the structure of the data, and to assess the impact of man-made sources of water pollution.     

Geostatistical 3-dimensional integration of measurements of soil magnetic susceptibility

In soil magnetometry, two types of measurements are usually performed. The first type is measurements performed on the soil surface, frequently using an MS2D sensor. The second type includes measurements of magnetic susceptibility carried out in the soil profile, usually to a depth of about 30 cm. Up to now, such measurement results were analyzed separately. However, it is possible and advantageous to integrate these two types of measurements. The goal of the study was to integrate measurements of magnetic susceptibility performed on the soil surface and in the soil profile. More specifically, the goal was to obtain 3-dimensional spatial distributions of magnetic susceptibility of the topsoil horizon. Results show that it is possible to effectively integrate measurements of magnetic susceptibility performed on the soil surface and in the soil profile. Moreover, the 3-dimensional spatial distribution that is obtained shows the magnetic susceptibility of the top 20 cm of soil, which includes the soil horizons where most of the heavy metals are accumulated. The analysis of such a spatial distribution can be very helpful in delineating areas where the heightened magnetic susceptibility is a result of the influence of anthropogenic pollution from those areas where it results from lithogenic origin. It is possible to investigate where the volumes of soil with heightened magnetic susceptibility are located in the soil profile and in this way investigate which characteristic type of soil profile it is.     

New procedures for simultaneous determination of mesotrione and atrazine in water and soil. Comparison of the degradation processes of mesotrione and atrazine

A method for the determination of residues of mesotrione, atrazine and its degradation products: deethylatrazine, hydroxyatrazine, deisopropylatrazine, desethyldesisopropylatrazine in a variety of water and soil matrices has been developed. Mesotrione is a new selective herbicide for use in corn, which has been substituted for atrazine, which has been banned in European Union countries since 2007. Although atrazine has not been used for three vegetative periods, it is still detected in the environment. The analysis was conducted by means of ultra-high-pressure liquid chromatography with ultraviolet detection and liquid chromatography with diode array detection. The procedures for analyte separation from water and soil matrices were also established. The optimal conditions for solid-phase extraction (SPE) were determined. The recoveries were compared with that obtained by means of SPE. Method fortification recoveries from water samples averaged 78–97% and for soil 80–97% depending on the analyte and type of sample. The limits of detection were 0.04–0.61 μg/L for water samples and for soil samples 0.02–0.88 μg/g. The soil samples were collected in spring 2009 from three different fields with water samples being made from effluents from these fields. Samples collection was conducted in the day of mesotrione (Callisto 100SC) application and then done weekly, until the mesotrione concentration was below the limit of quantification. The results enabled the monitoring of mesotrione degradation in soil and its permeability into surface waters; simultaneously, the same studies were conducted for atrazine.