Occupational exposure to rubber vulcanization products during repair of rubber conveyor belts in a brown coal mine

Several hundred chemical compounds were found in workroom environments in the rubber industry, but most of the published exposure data relate to the production of tyres; information from the "non-tyre" sections are very limited, if any. This study was carried out to identify chemical substances and measure their air concentrations in the repair shop of a brown coal mine in which damaged rubber conveyor belts were repaired. GC-MS and HPLC analysis of stationary air samples resulted in identification of aliphatic and aromatic hydrocarbons to C12, PAHs, alcohols, phenols, ketones, heterocyclic nitrogen and sulfur compounds. Quantitative evaluation of occupational exposure included determination of organic compound vapours collected on charcoal (GC-MSD), polycyclic aromatic hydrocarbons (HPLC), N-nitrosoamines and other amines (GC-NPD) and DNPH derivatives of aldehydes (HPLC) in the breathing zone of workers representing all job titles. The concentrations of investigated compounds were very low. Carcinogenic substances: N-nitrosoamines, benzene, PAHs were not present in workroom air in concentrations exceeding limits of detection of the analytical methods being applied; concentrations of methylisobutylketone, tetrachloroethylene, naphtha, aromatic hydrocarbons, phthalates and aldehydes were much lower than the respective occupational exposure limit values. The results indicate much lower exposure than that reported in the production of tyres and other fabricated rubber products.     

Influence of type of MVC test on electromyography measures of biceps brachii and triceps brachii

Objective. This study aimed to investigate the amplitude and frequency measures of the electromyography (EMG) signal in agonistic and antagonistic muscles (biceps brachii, triceps brachii). Methods. Fifteen males (22.9?±?2.1 years old) took three isometric maximum voluntary contraction (MVC) tests. Two tests were typical MVC tests for biceps brachii and triceps brachii. The third was a test often used to obtain MVC for forearm muscles (arm and forearm hanging down). The EMG signal was recorded during three isometric MVC muscle contractions and during a relaxation test. Results. There were no differences in amplitude between relaxation and MVC antagonist in static contraction, with higher values for frequency measures in relaxation. When biceps brachii and triceps brachii act as antagonists in an MVC test, frequency measures present lower values than when the muscles act as agonists. Biceps brachii shows much lower amplitude than during an agonist MVC contraction with similar spectral measures. Triceps brachii presents much higher values of spectral measures than during an agonist MVC test. Conclusion. The type of exerted force, i.e., if a muscle acted as an agonist, antagonist or stabilizer, affects the relationship between the time and frequency domain measures.     

The sensitivity of soil enzymes,microorganisms and spring wheat to soil contamination with carfentrazone-ethyl

Herbicides pose a significant threat to the natural environment, in particular in soils that are most exposed to plant protection agents. Prolonged herbicide use leads to changes in soil metabolism and decreases soil productive potential. In this study, the influence of carfentrazone-ethyl (CE) on the microbiological and biochemical properties of soil and the yield of Triticum aestivum L. was evaluated. Carfentrazone-ethyl was applied to sandy loam (pH_KCl – 7.0) in doses of 0.000, 0.264, 5.280, 10.56, 21.18, 42.24, 84.48 and 168.96 µg kg^?1 DM soil. Soil samples were subjected to microbiological and biochemical analyses on experimental days 30 and 60. Carfentrazone-ethyl disrupted the biological equilibrium in soil by decreasing the abundance and biodiversity of soil-dwelling microorganisms, the activity of soil enzymes, the values of the biochemical activity indicator and spring wheat yields. Carfentrazone-ethyl had the most adverse effects when applied in doses many fold higher than those recommended by the manufacturer. The toxic effects of CE were also determined by its soil retention time. Soil treated with CE was characterized by higher counts of oligotrophic bacteria, organotrophic bacteria, bacteria of the genus Azotobacter, actinomycetes and fungi on day 60, and spore-forming oligotrophic bacteria on day 30. The activity of dehydrogenases, urease, alkaline phosphatase and β-glucosidase was higher on day 30 than on day 60.     

Ecotoxicological and microbiological characterization of soils from heavy-metal- and hydrocarbon-contaminated sites

The aims of this study were to characterize soils from industrial sites by combining physicochemical, microbiological, and ecotoxicological parameters and to assess the suitability of these assays for evaluation of contaminated sites and ecological risk assessment. The soil samples were taken from long-term contaminated sites containing high amounts of heavy metals (sites 1 and 2) or petroleum hydrocarbons (site 3) located in the upper Silesia Industrial Region in southern Poland. Due to soil heterogeneity, large differences between all investigated parameters were measured. Microbiological properties revealed the presence of high numbers of viable hetrotrophic microorganisms. Soil enzyme activities were considerably reduced or could not be detected in contaminated soils. Activities involved in N turnover (N mineralization and nitrification) were significantly (P?<?0.05) higher in samples from the metal-contaminated sites than in samples from the hydrocarbon-contaminated site, whereas the opposite was observed for phosphatase activity. The Microtox test system appeared to be the most appropriate to detect toxicity and significant differences in toxicity between the three sites. The Ostracodtoxkit test was the most appropriate test system to detect toxicity in the hydrocarbon-contaminated soil samples. Correlation analysis between principal components (obtained from factor analysis) determined for physicochemical, microbiological, and ecotoxicological soil properties demonstrated the impact of total and water-extractable contents of heavy metals on toxicity.     

A method of rapid identification of the most important ecological problems in polluted areas

A comprehensive method is presented for the evaluation of the living elements of the environment by way of an example of an area situated within the emission range of a non ferrous metal works. The exposure of particular components of the environment is shown using the method of indices, taking into consideration the action of pollutants on the most essential and sensitive receptors. Methods of exposure reduction are also suggested. The proposed method may be helpful in land-use planning in polluted environments and can also be applied to determine the sequence of activities aimed at diminishing the effects of pollution.     

Subfossil markers of climate change during the Roman Warm Period of the late Holocene

Abundant bog oak trunks occur in alluvial deposits of the Raba River in the village of Targowisko (southern Poland). Several of them contain galleries of the great capricorn beetle (Cerambyx cerdo L.). A well-preserved subfossil larva and pupa, as well as adults of this species, are concealed in some of the galleries. These galleries co-occur with boring galleries of other insects such as ship-timber beetles (Lymexylidae) and metallic wood borers (Buprestidae). A dry larva of a stag beetle (Lucanidae) and a mite (Acari) have been found in the C. cerdo galleries. Selected samples of the trunks and a sample of the C. cerdo larva were dated, using radiocarbon and dendrochronological methods, to the period from 45 bc to ad 554; one sample was dated to the period from 799 to 700 bc. Accumulation of the channel alluvia containing the bog oak trunks is synchronous with the Roman Warm Period (late antiquity/Early Mediaeval times). The most recent part of this period correlates with massive accumulations of fallen oak trunks noted from various river valleys in the Carpathian region and dated to ad 450–570. The results indicate that C. cerdo was more abundant within the study area during the Roman Warm Period than it is today.     

Accumulation of elements by edible mushroom species II. A comparison of aluminium,barium and nutritional element contents

The aim of the study was to compare accumulation efficiency of Al, Ba and nutritional elements (Ca, Fe, K, Mg, Mn, Na) exhibited by six edible mushrooms collected in particular regions of Poland during the last 20 years. The studied mushroom species were Boletus edulis, Cantharellus cibarius, Lactarius deliciosus, Leccinum aurantiacum, Suillus luteus and Xerocomus badius. The highest and the lowest concentrations of the elements in tested mushroom species were 11 – 410, 34 – 337, 16785 – 34600, 140 – 607, 12 – 75 and 16 – 143 mg kg^?1d.m., respectively. The highest average concentrations of Al, Mg and Mn were observed in Suillus luteus fruiting bodies, while for Ba, Ca, K and Na it was in Lactarius deliciosus. BCF >1 was found for K and Mg in all tested mushroom species and additionally for the highest Ca and Na concentrations of all tested mushroom species except for C. cibarius and S. luteus, respectively. For the other tested elements (Al, Ba, Fe and Mn) BCF values < 1 were recorded.     

Seasonal changes in the concentrations of nitrogen and phosphorus in farmland drainage and groundwater of the Taihu Lake region of China

Monte Carlo simulations were performed using the GEANT4 code for the investigation of γ-ray absorption in water in different spherical geometries and of the efficiency of a NaI(Tl) detector for different radionuclides in the aquatic environment. In order to test the reliability of these simulations, experimental values of the NaI(Tl) detector efficiency were deduced and seem to be in good agreement with the simulated ones. In addition, using the simulated efficiency, an algorithm was developed to determine the minimum detectable activity in becquerels per cubic meter in situ as a function of energy for typical freshwater and seawater spectra.     

Sublethal detergent concentrations increase metabolization of recalcitrant polyphosphonates by the cyanobacterium Spirulina platensis

As a consequence of increasing industrial applications, thousand tons of polyphosphonates are introduced every year into the environment. The inherent stability of the C–P bond results in a prolonged half-life. Moreover, low uptake rates limit further their microbial metabolization. To assess whether low detergent concentrations were able to increase polyphosphonate utilization by the cyanobacterium Spirulina platensis, tolerance limits to the exposure to various detergents were determined by measuring the growth rate in the presence of graded levels below the critical micellar concentration. Then, the amount of hexamethylenediamine-N,N,N′,N′-tetrakis(methylphosphonic acid) that is metabolized in the absence or in the presence of sublethal detergent concentrations was quantified by ³¹P NMR analysis on either P-starved or P-fed cyanobacterial cultures. The strain tolerated the presence of detergents in the order: nonionic > anionic > cationic. When added to the culture medium at the highest concentrations showing no detrimental effects upon cell viability, detergents either improved or decreased polyphosphonate utilization, the anionic sodium dodecyl sulfate being the most beneficial. Metabolization was not lower in P-fed cells—a result that strengthens the possibility of using, in the future, this strain for bioremediation purposes.