Analysis of micro-cracks on machined surfaces in dry electrical discharge machining

Micro-crack formation in the heat affected zone in EDM is a common phenomenon and many measures have been perceived to minimize their occurrence. This paper presents a comprehensive and quantitative analysis of micro-crack formation, in terms of length, number and orientation of micro-cracks formed on the machined surfaces. The influence of processing conditions on crack formation is studied using the observations under scanning electron microscope (SEM). The results indicate that the micro-crack formation is the best represented in terms of average crack length. Statistical analysis of the results shows that pulse off-time (T_off), current (I), voltage (V) and electrode rotation speed (N) significantly influence the average crack length in both wall and bottom regions of the machined hole. In dry EDM, micro-crack formation occurs due to segregation of elements in the work surface and inter-diffusion of elements between work, and shield. A comparison of crack formation with the liquid dielectric EDM shows that average length and number density of micro-cracks were lower in the dry EDM than those in the liquid dielectric EDM.     

Building low-carbon and disaster-resilient communities: integrating climate mitigation and adaptation into the assessment of self-help housing design

Housing is not only one of the major sources of carbon dioxide (CO₂) emissions, but it has been increasingly vulnerable to climate-induced disasters, particularly those sheltering the urban poor. Both mitigation and adaptation measures are therefore required for the design and construction of low-income housing to encourage low carbon development and improve resilience to disasters. As self-help housing—the common type of housing for the urban poor in developing countries—is usually built by ordinary people with participatory approach, it is crucial to develop a low-carbon and disaster-resilient assessment tool for assisting them in making informed decisions during planning process. The objective of this article is to propose a new approach for developing a low-carbon and disaster-resilient assessment tool for self-help housing (LoDAT-SH) by combining opinions from experts and community residents to assign weights, identify indicators, and establish benchmarks with the aim to develop a simple, relevant, and practical tool for non-expert users like self-help residents. The application of the proposed methodology to a case study of a developing country, Thailand, shows the ability of LoDAT-SH, which contains 45 indicators in the four categories of low carbon development, disaster resilience, community participation, and financial consideration, in enabling self-help residents to assess the performance of their housing design, identify potential measures to create a low-carbon and disaster-resilient housing, and prioritize such actions. To support the creation of a low-carbon and disaster-resilient housing as the mitigation and adaptation strategy for urban development at the global level, the study suggests that the methodology of LoDAT-SH should be replicated to develop a more comprehensive assessment tool applicable for the use in self-help housing design in other developing countries, which will house about 900 million of the urban poor by 2020.     

Analysis of Wet Precipitation of Air Pollutants in Mumbai (India)

Bulk precipitation samples at Mumbai (India) were collectedduring the monsoon seasons of 1991 to 1996 and analysed forionic concentrations using an Ion Chromatograph DIONEX model100. The variability of sulphate to nitrate ratio in rainwaterfluctuates in a wide range from 1.5 to 20 and governed by thesulphate concentrations in the sample. The regression analysisof the data reveals that in the bulk precipitation at Mumbai, SO₄ ^2- is becoming increasingly important relative toNO₃ ^-. The role of meteorological influences onscavenging of air pollutants by rain water has been tried toexplain the phenomena. The computed wet deposition rates for Sand N during 1991–1996 show that the S deposition is higherthan N in all the years. There is a wide fluctuation indeposition rates of S ranging from 2 to 55 kg km² per annum.     

Interaction Effects of Metals and Salinity on Biodegradation of a Complex Hydrocarbon Waste

Abstract

The presence of high levels of salts because of produced brine water disposal at flare pits and the presence of metals at sufficient concentrations to impact microbial activity are of concern to bioremediation of flare pit waste in the upstream oil and gas industry. Two slurry-phase biotreatment experiments based on three-level factorial statistical experimental design were conducted with a flare pit waste. The experiments separately studied the primary effect of cadmium [Cd(II)] and interaction effect between Cd(II) and salinity and the primary effect of zinc [Zn(II)] and interactioneffect between Zn(II) and salinity on hydrocarbon biodegradation. The results showed 42–52.5% hydrocarbon removal in slurries spiked with Cd and 47–62.5% in the slurries spiked with Zn. The analysis of variance showed that the primary effects of Cd and Cd–salinity interaction were statistically significant on hydrocarbon degradation. The primary effects of Zn and the Zn-salinity interaction were statistically insignificant, whereas the quadratic effect of Zn was highly significant on hydrocarbon degradation. The study on effects of metallic chloro-complexes showed that the total aqueous concentration of Cd or Zn does not give a reliable indication of overall toxicity to the microbial activity in the presence of high salinity levels.     

A rapid method for determination of Aroclor 1260 in cattle adipose tissue

Abstract

A simple analytical procedure for the determination of Aroclor 1260 in cattle adipose tissue is described. The polychlorinated biphenyls residues are extracted from the tissue using a soxhlet extractor and the extracts are cleaned up using a florisil SEP‐PAK cartridge. The residues are detected using a gas chromatograph equipped with an electron capture detector. The effect of extraction time of the Aroclor 1260 residues from the tissue has been investigated and a period of four hours is found to give satisfactory percent recoveries. Greater than 85 percent recoveries were obtained from adipose tissue spiked with Aroclor 1260. The method can be used to detect Aroclor 1260 residue levels as low as 0.10 parts per million.

The method was used to analyze thirty‐one cattle adipose tissue samples out of which twenty‐six samples were taken from cattle suspected of exposure to a pasture containing electrical transformers and capacitors containing Aroclor 1260. Five control samples were collected from cattle with no known exposure. All twenty‐six samples were found to contain non‐detectable Aroclor 1260 residues.     

Mineral aerosols from western India: Temporal variability of coarse and fine atmospheric dust and elemental characteristics

Size-segregated aerosol samples (PM_2.5 and PM₁₀) were collected during Jan–Dec-2007 from a high-altitude site located in a semi-arid region (Mt. Abu, 24.6 °N, 72.7 °E, 1680 m asl) in order to asses the temporal variability in the abundance of atmospheric mineral dust and its elemental composition over western India. The mass concentrations of fine (PM_2.5) and coarse (PM_10–2.5) mode aerosols varied from 1.6 to 46.1 and 2.3 to 102 μg m^?3 respectively over the annual seasonal cycle; with dominant and uniform contribution of mineral dust (60–80%) in the coarse mode relative to large temporal variability (11–75%) observed in the fine mode. The coarse mass fraction shows a characteristic increase with the wind speed during summer months (Mar to Jun); whereas fine aerosol mass and its elemental composition exhibit conspicuous temporal pattern associated with north-easterlies during wintertime (Oct–Feb). The Fe/Al weight ratio in PM_2.5 ranges from 0.5 to 1.0 during winter months. The relative enrichment of Fe in fine mode, compared to the crustal ratio of 0.44, is attributed to the down-wind advective transport of combustion products derived from large-scale biomass burning, industrial and automobile emission sources located in the Indo-Gangetic Plain (northern India). In contrast, Ca/Al and Mg/Al weight ratios show relative enrichment of Ca and Mg in the coarse mode; indicating their dominant contribution from carbonate minerals. This has implication to efficient neutralization of atmospheric acidic species (SO₄^2? and NO₃^?) by mineral dust over western India.     

Phosphate solubilizing actinomycetes in the estuarine environment: an inventory.

Sediment samples were collected from different stations of the Vellar estuary for isolation of total actinomycetes and phosphate solubilizing actinomycetes. Phosphatase activity in the sediments was also investigated Consistently a higher number of actinomycetes, phosphate solubilizing actinomycetes and phosphatase activity were recorded from the clay sediments than the sandy sediments at all the stations. In all, 7 strains showed positive phosphatase activity. Among them, one strain PS-3 exhibited good activity and was further investigated for optimum phosphorus solubilization at different pH (6, 6.5, 7, 7.5 and 8) and incubation (1st day to 20th day) periods. The solubilizing activity was maximum at the pH 7 and an incubation period of 13 days was required for an appreciable quantity of phosphorus to be leached into the medium. Based on the chemotaxonomical and conventional methods of identification, the strain PS-3 has been tentatively identified as Streptomyces galbus. The present study indicates that phosphatase enzyme and S. galbus along with other actinomycetes species would play a major role in solubilizing the phosphate in the estuarine ecosystem and increasing the soluble phosphate concentration thereby enhancing the productivity     

Bright photophase accelerates re-entrainment after experimental jetlag in Drosophila

The efficacy of bright photophase (BP) in accelerating the re-entrainment of Drosophila biarmipes rhythm following 8?h phase advance and delay of light–dark (LD) cycle was examined by subjecting the flies to 24?h LD cycles with dim photophase (DP) at 30?lx and BP at 300?lx. Re-entrainment was analysed by using the activity onset, activity offset and the duration of activity. Following LD advance or delay, the BP flies re-entrained faster than the DP flies which was attributed to the enhanced zeitgeber strength of BP. Nevertheless, the re-entrainment was a protracted process even in the BP flies since the activity offsets underwent more transients than the activity onsets. Thus, this study demonstrates that the BP accelerates the re-entrainment in D. biarmipes. It, however, also reveals that the re-entrainment is a prolonged process when the activity onset and offset are regarded as the rhythm markers.     

A GFP-based bacterial biosensor with chromosomally integrated sensing cassette for quantitative detection of Hg(II) in environment

A mercury biosensor was constructed by integrating biosensor genetic elements into E. coli JM109 chromosome in a single copy number, using the attP/attB recombination mechanism of λphage. The genetic elements used include a regulatory protein gene (merR) along with operator/promoter (O/P) derived from the mercury resistance operon from pDU1358 plasmid of Serratia marcescens. The expression of reporter gene gfp is also controlled by merR/O/P. Integration of the construct into the chromosome was done to increase the stability and precision of the biosensor. This biosensor could detect Hg(II) ions in the concentration range of 100-1700 nmol/L, and manifest the result as the expression of GFP. The GFP expression was significantly different (P ≤ 0.05) for each concentration of inducing Hg(II) ions in the detection range, which reduces the chances of misinterpretation of results. A model using regression method was also derived for the quantification of the concentration of Hg(II) in water samples.     

Impacts of Mauritia flexuosa degradation on the carbon stocks of freshwater peatlands in the Pastaza-Marañón river basin of the Peruvian Amazon

Tropical peat swamp forests (PSF) are characterized by high quantities of carbon (C) stored as organic soil deposits due to waterlogged conditions which slows down decomposition. Globally, Peru has one of the largest expanse of tropical peatlands, located primarily within the Pastaza-Marañón river basin in the Northwestern Peru. Peatland forests in Peru are dominated by a palm species—Mauritia flexuosa, and M. flexuosa-dominated forests cover ~?80% of total peatland area and store ~?2.3 Pg C. However, hydrologic alterations, land cover change, and anthropogenic disturbances could lead to PSF’s degradation and loss of valuable ecosystem services. Therefore, evaluation of degradation impacts on PSF’s structure, biomass, and overall C stocks could provide an estimate of potential C losses into the atmosphere as greenhouse gases (GHG) emissions. This study was carried out in three regions within Pastaza-Marañón river basin to quantify PSF’s floristic composition and degradation status and total ecosystem C stocks. There was a tremendous range in C stocks (Mg C ha^?1) in various ecosystem pools—vegetation (45.6–122.5), down woody debris (2.1–23.1), litter (2.3–7.8), and soil (top 1 m; 109–594). Mean ecosystem C stocks accounting for the top 1 m soil were 400, 570, and 330 Mg C ha^?1 in Itaya, Tigre, and Samiria river basins, respectively. Considering the entire soil depth, mean ecosystem C stocks were 670, 1160, and 330 Mg C ha^?1 in Itaya, Tigre, and Samiria river basins, respectively. Floristic composition and calcium to Magnesium (Ca/Mg) ratio of soil profile offered evidence of a site undergoing vegetational succession and transitioning from minerotrophic to ombrotrophic system. Degradation ranged from low to high levels of disturbance with no significant difference between regions. Increased degradation tended to decrease vegetation and forest floor C stocks and was significantly correlated to reduced M. flexuosa biomass C stocks. Long-term studies are needed to understand the linkages between M. flexuosa harvest and palm swamp forest C stocks; however, river dynamics are important natural drivers influencing forest succession and transition in this landscape.